5 Axis CNC Routers

BIESSE ROVER A 1643

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Lajdpfxszuwyze Apdsg Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Work area and workpiece capacity Travel range X-axis: 3110 mm Travel range Y-axis: 1620 mm Workpiece passage Y: 1,900 mm Workpiece passage Z: 180 mm Workpiece length in shuttle mode: 1,400 mm Table design: TV FLEX 1600 / FLEXMATIC Number of cross traverses: 6 Positions of traverses: 6 to 12 positions Axis speeds and drive data Maximum vector speed X/Y (PRO-SPACE): 56 m/min Maximum vector speed X/Y (PRO-SPEED): 78 m/min Speed of vertical drilling spindles: up to 8,000 RPM Speed of horizontal drilling spindles: up to 8,000 RPM Max. speed of main spindle: 24,000 RPM Speed of grooving unit/circular saw: frequency-controlled, approx. 2,500-8,000 RPM CNC control and software Operating system: Windows 7 Display: 21.5" LCD Full-HD (16:9) Operation: Keyboard, mouse and machine control panel Software: Maestro CNC Programming: Parametric programming, graphic programming, ISO code, DXF import Machining functions: Milling, drilling, tool management, machining programs Lodpezuwursfx Apdoag Simulation: Graphic simulation of drilling and milling operations TECPAD: 7" touchscreen for machine functions and error messages Mobile operation: Portable control panel for operation along the machine Drilling and grooving unit F23L Vertical drilling spindles: 13 independent spindles (7 clockwise, 6 counterclockwise) Horizontal drilling spindles: 10 independent spindles Arrangement of horizontal spindles: 4 spindles in the X direction on one side, 3 spindles in the X direction on the opposite side, 2 spindles in the Y direction Integrated sawing unit: Grooving and circular saw unit in the X direction Saw blade diameter: 125 mm Motor power of sawing unit: 2.2 kW (approx. 3 hp) Stroke of vertical drilling unit: 75 mm pneumatic stroke Stroke of horizontal drilling unit: 75 mm pneumatic stroke Frequency inverter: Programmable speed control up to 8,000 RPM 5-axis milling unit and tool changing system Main unit: JQX 5-axis milling unit Spindle type: Hiteco HSK-F63 electric spindle Power: 10 kW rated power Peak power (S6): approx. 9.5-15 kW Maximum speed: 24,000 RPM Bearings: Ceramic bearings Cooling: Liquid-cooled spindle Lubrication: Central automatic lubrication system Rear tool magazine TRB 14 Magazine positions: 14 Travel range: 350 mm Pitch: 115 mm Max. tool diameter: 240 mm Max. total tool weight: 70 kg Front tool magazine FAST 14 Magazine positions: 14 Max. tool diameter: 130 mm Max. tool weight per position: 8 kg Max. total weight: 24 kg Vacuum system, workpiece clamping and positioning Vacuum cups: 12 pcs, permanently mounted Dimensions of cups: 145 x 145 mm Height of cups: 75 mm Vacuum pump: Standard 1 vacuum pump Additional vacuum pump: 90 m³/h Workpiece supports: 4 pneumatic workpiece supports Rear stops: 8 aluminum stops Intermediate stops: 8 aluminum stops Side stop: Left reference stop with laser positioning Preparation for clamping cylinders: Prepared for 6 pneumatic clamping cylinders Extraction and compressed air Connection power: 23 + 28.5 kVA Compressed air consumption: 450 l/min Required extraction capacity: 4,500 m³/h Air velocity in extraction: 25 m/s Extraction nozzle: 250 mm

Condition: new, machine/vehicle number: 1000007776, CONTROL SYSTEM • Numerical control, PC-based • bSolid software • CAD-CAM 3D module – 3-axis working module – bEdge module TECHNICAL FEATURES • Usable working area (X-Y-Z): approx. 4,320 x 1,600 x 200 mm • Usable working area for edgebanding (X–Y): approx. 3,300 x 1,500 x 60 mm PANEL SUPPORT AREA • 2 independent working zones on the X axis • 10 Set-Up Assistant (SA) working tables for panel support, with manual positioning and illuminated position/direction indicators – 32 rails • 8 lifting bars for loading support Lajdpfx Asw Nip Sepdjg • 28 stops (8 rear stops, 8 intermediate stops at 670 mm, 6 side stops, 6 central stops) each with descent verification sensors • 1 vacuum pump, 100 m³/h DRILLING/SAWING UNIT • 1 extra 'Z' pod for rear working unit • 1 BH 24 L boring head GROOVING/MILLING UNIT • 1 electrospindle, 13.2 kW (17.7 HP), HSK F63 tool clamping system, air-cooled, equipped with a 360° working unit and gear C-axis torque • 1 air blowing system with 4 nozzles • 1 revolver tool changer with 16 positions on the X pod EDGEBANDING UNIT • GU60L edgebanding unit for EVA and PUR adhesives, including: – glue pot for EVA and glue pot for PUR – pre-melter for EVA glue – double pressure roller for edgebanding radii up to 30 mm; closed-loop joint sensor • 1 edge magazine for 2 coils positioned on the X pod • 1 edge magazine for 2 coils outside the machine • 1 blower unit for panel cleaning prior to edgebanding • 1 cleaning station for edge trimming units • 1 HSK F63 aggregate for blade diameter max. 215 mm • 1 combined unit for rough trimming, edge scraping, and glue scraping EF60A • 1 unit for edge rounding and end trimming • 1 kit for narrow panels 10-60 mm (edge max. 2 mm) and 12-60 mm (edge max. 3 mm) PREDISPOSITIONS AND ACCESSORIES • Automatic lubrication system • Waste extraction system for wood chips SAFETY STANDARDS AND OPTIONS • Copy of original EC Declaration of Conformity • Bumper system and double front/rear photoelectric safety barriers

Condition: used, Technical Specifications - Working range of the X-axis: 3,260 mm - Working range of the Y-axis: 1,260 mm - Working range of the Z-axis: 165 mm - Machine design: Gantry - Tool magazine capacity: 16 positions - Power of the electric spindle: 19 kW Lsdpfxjzutq Aj Apdjag - Total power consumption: 20 kW

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, number of axes: 5, number of slots in tool magazine: 11, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details. • Working area / axes: • Panel length (Y): 1900 mm (2210 mm) • Panel height (Z): 180 mm • Panel length for through machining: 1400 mm • Vector speed X‑Y: Pro‑Space 56 m/min; Pro‑Speed 78 m/min • Worktable: 6–12 beams (TV Flex), 12 vacuum pods (145 × 145 × H75 mm); 2 stops per beam; movable beam length 1600 mm. • Drilling unit (general spec): • 21 vertical spindles, 8,000 rpm • 10 horizontal spindles, 8,000 rpm • Integrated saw Ø125 mm (X), 10,000 rpm • Motor power 2.2 kW • Electrospindle: 10 kW (S6), max 24,000 rpm. • Installation requirements: installed power 23–28.5 kVA; compressed air 450 NL/min; dust extraction 4500 m³/h, 25 m/s, outlet Ø250 mm. • Structure and motion: • Heavy, stress‑relieved, electro‑welded steel frame; all machining in single setup on CNC metalworking machines. • High‑speed four‑row linear guides; three‑circuit recirculating ball systems; X‑axis helical rack‑and‑pinion. • Brushless motors, inverters; machining units mounted on mobile gantry for rigidity. • Transparent polycarbonate safety enclosure. Laedez A Ahqopfx Apdeg • CNC control and software: • PC‑Office: Windows 7, 17" color LCD, QWERTY keyboard, mobile control panel, Xilog Maestro. • Xilog Maestro features: parametric/graphical/ISO programming; DXF/ASCII import (2D); 3D linear/circular interpolation; spatial linear interpolation; helical interpolation; guided editor; automatic drilling optimization and tool libraries; panel origin offset; simulation; barcode management (software); self‑diagnostics; step‑by‑step manual intervention; graphical unit configuration; machining speed selection; SCM CNC Jerk function. • Safety: CE; PRO‑SPACE system with safety bumpers (automatic stop on potential collision). • Table equipment included/mentioned: rear aluminum reference stops H75 per beam; second central reference stops per beam; front reference stops H75 per beam. • Vacuum system: integrated vacuum pump 90/108 m³/h, 50 Hz. • F23 L drilling unit (listed configuration): • Independent Z‑axis • 13 independent vertical spindles (8 X / 5 Y) • 6 independent horizontal spindles (quick‑release), incl. 4 in Y • 32 mm pitch • Speed 4,500–8,000 rpm (inverter) • Rear‑panel groove/saw unit Ø125 mm, 5,500–10,000 rpm (inverter) • Motor 2.2 kW • Increased Z‑pressure • RO AX advantages: high productivity, precision, finish quality, processing speed; up to 90% reduction in maintenance (approx. 1,000‑hour interval). Additional equipment • TRB14 side‑mounted tool magazine (optional), right side: • Capacity up to 11 tools; max Ø350 mm • Center distance 130 mm • Max tool weight 8 kg; total 48 kg • 4 workpiece lifting supports H75, two lifting levels (above clamps and working level), 20 kg per support • Additional hardware key with USB port