Construction machinery

Bobcat E17 CAN

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control system V 6, stand base for vertical arrangement, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure amplifier 1 tilting and rotating table WPK 5000, load capacity 500 kg, 1 start pre-selection, 1 control unit for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor System will be completely overhauled and serviced before delivery. Iodeizwv Njpfx Ahnsig A second station with another identical tilting and rotating table is possible.

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR35 Ricardo Motor Newpower generator generator set Continuous power: 24 kW / 30 kVA Maximum power: 26kW / 33kVA Engine : Kofo RIcardo N4100DS-30, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2180x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load: 7.15 L/h At 75% load : 5.8 L/h At 50% load : 3.7 L/h Mains monitoring, mains feed, soundproofed Ready for immediate use. Net price: €5,208, gross price: €6,197 additional costs Isdpfsn D E Ifox Ahnoig 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,300 h, power: 102.97 kW (140.00 HP), motor manufacturer: Deutz, machine/vehicle number: WSXCZ20200TD10041, Equipment: air conditioning, cabin, front power take-off, TTV transmission Front axle and cab suspension Iijdpfx Aheyalwtsnsg Front linkage with PTO

Condition: new, PRICE: 2000 EUR Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Voltage: 220V / 50Hz Power: 2.2kW Iiedpjx Dcdqsfx Ahneg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 118950, high-pressure hose length: 15,000 mm, pressure: 150 bar, input voltage: 230 V, The Kärcher HD5/15 CX Plus + FR Classic (surface cleaner) cold water high-pressure cleaner is an exhibition piece in like-new condition. This compact, lightweight, and versatile cold water high-pressure washer HD 5/15 CX Plus + FR Classic stands out for its excellent mobility and is suitable for both upright and horizontal operations. The unit features sophisticated accessory storage and, thanks to its brass cylinder head and automatic pressure relief, promises a long service life. At the same time, it impresses with innovative developments that sustainably enhance user comfort by enabling fatigue-free work and time-saving setup and dismantling. The EASY!Force high-pressure gun utilizes the recoil force of the high-pressure jet, reducing the holding force to zero, while the EASY!Lock quick-release fasteners allow for handling that is five times faster than conventional screw fittings without sacrificing robustness and durability. An all-around well-thought-out equipment package for outstanding cleaning results, offering high comfort and long service life. Technical Data: Iedpfx Ahjyzpduonsig Voltage: 230V Power consumption: 2.8 kW Operating pressure: 150 bar Connection cable: 5 meters

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m Ijdpfxswxdqks Ahnjig

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Ijdpfx Ahsuc Idxenjig Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: used, Rollkontener Rollcage mesh trolley for laundry, warehouse - used. A rollcounter is a trolley used for transporting lightweight, bulky products. Rollcages are used for transporting goods by car, as their construction is collapsible. Once the goods have been taken to their destination, the trolleys on the return journey can be folded or nested - putting the trolley one inside the other. Wheels of the mobile roll container: - 2 swivel - 2 non-steering - smooth-running - non-tracking - diameter 13 cm - made of polypropylene Base in container trolley - made of plastic Iijdpfx Ahovai Sqsneg - reinforced by a side beam - Load capacity up to 500 kg. Used roll containers are available off-the-shelf and we are able to organise transport/shipment very quickly. The laundry trolley is sent to the customer assembled. The offer concerns a Rollcontainer / Rollcage / mesh trolley for laundry, warehouse - used: Product code : MTP001097 Technical condition: good Product condition: used Height (cm): 195 Width (cm): 75 Length (cm): 84 Net price : €20.00 each. The offer concerns a Rollkontener / Rollcage / mesh trolley for laundry, warehouse - used: Product code : MTP001096 Technical condition: good Product condition: used Height (cm): 195 Width (cm): 75 Length (cm): 84 Net price : €23.00 each. The offer concerns a Rollkontener / Rollcage / mesh trolley for laundry, warehouse - used: Product code : MTP002883 Technical condition: very good Product condition: used Height (cm): 195 Width (cm): 75 Length (cm): 84 Net price : €30.00 each. The prices quoted apply to wholesale quantities (full truckload) for export outside Poland. Please contact us to discuss the details. Please contact us to check wholesale and retail prices in Poland. * I have large quantities on hand, * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Iodpfxehzcg No Ahnjig Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Condition: new, Year of construction: 2026, CORMAK LUP7T WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well-suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation system, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7T if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7T wood splitter The CORMAK LUP7T wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7T model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7T is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for use at home, on a farm, or in a small service point. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage compared to stand-mounted versions Iedpfx Ahszarp Nsnoig The CORMAK LUP7T is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover over the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Technical parameters of CORMAK LUP7T: Splitting force: max. 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: mains Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: not included Standard equipment CORMAK LUP7T hydraulic wood splitter Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction