Used Hydraulic single column presses 26-50t for sale (31)

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t Colrfjvzxrpsbfbogt dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, - Press force 400 kN / 40 t - Ram stroke 500 mm Colrfbfswgacxjbogt - Throat depth 360 mm - Maximum distance between table and ram 800 mm - Power consumption 7.5 kW - Weight approx. 2.8 t

Condition: good (used), Norton 50T Downstroke Plate Frame Hydraulic Press • Press height 2750mm including pipework • Press Weight 1100Kgs • Max Press Load 50T • Max Hydraulic Pressure 428Kgs/cm2 Cgslreulizlefbfbet • Ram Stroke Adjustable 610mm Max • Bed Height 762mm to Face of Bolster • Bed Area 610mm l-r x 406mm b-f • Oil Tank Capacity 70 lt. • Electric Motor Size 7.5Hp • Electrical Supply 415v 3 Phase • Overall Size Of press Unit 740 x 550 x 2750mm (WDH) • Ram End is 105mm Dia Plain End. Supplied with: • Machine Handbooks • *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78800 Machine Serial Number: Not Visible Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1992, pressing force: 30 t, I sell pneumatic press PRESSOTECHNIK PC 30-58, 30Ton, Perfect condition ! Cgoljudpfyjrfbfbet

Condition: new, Year of construction: 2025, throat depth: 250 mm, pressing force: 40 t, table width: 500 mm, table length: 600 mm, table height above floor: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS Celrfbfsvzkr Uebogt MODEL CHCP 40 PRESSURE (TONE) 40 STROKE (MM) 500 THROAT DEPTH (MM) 250 TABLE – RAM DISTANCE (MM) 600 TABLE DIMENSION (MM) 500X600 PRESS DEPTH (MM) 1050 PRESS WIDTH (MM) 500 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2400 MAIN CYLINDER DIAMETER (MM) 245 ENGINE POWER (KW) 5.5 WEIGHT (KG) 4500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: excellent (used), Year of construction: 1975, Functionality: fully functional, total height: 31,500 mm, total width: 13,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 1,000 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 15 kW (20.39 HP), PYE 40 SS hydraulic press with ejector. Year of production 1975, manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 1000 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 15 kW. Cslrfjtzxtpobfbogt Weight 3200kg. Height 3150mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: used, Year of construction: 1996, pressure 40 t throat 330 mm stroke 250 mm dayligth 450 mm table surface area 800 x 500 mm hole in the table 100 mm table height over floor 900 mm ram surface 100 mm feed down 406 mm/sec feed up 393 mm/sec feed under pressure 14 mm/sec oil volume 350 l total power requirement 7,5 kW weight of the machine ca. 4,6 t required space 1,3 x 2,3 x 3,4 m Csljvuucdsrfbfbegt permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse

Condition: new, Year of construction: 2024, Hydraulic press MECAMAQ / C-frame series / 40 tons / type (PCC40) Technical specifications: - 40T force, activated by 1 double-acting cylinder (Ø130/Ø80). - Dimensions of the lower plate 600x450mm, with "T" slots M12 (DIN650). - End of the piston rod mechanized for the attachment of Ø40x40mm tools. - Maximum opening 500mm. - Stroke of the hydraulic cylinder 250mm. - Outreach 250mm. - Hydraulic system with 2 speeds and automatic change of high speed by pressure activated by gear pumps. - Monitored hydraulic valves and hydraulic components installed on the machine according to hydraulic diagrams EN693 "Hydraulic system self-monitoring for hydraulic presses with downward stroke". - Maximum pressure of the hydraulic unit 300 bar. - Approach speed 28mm/s. - Working speed 7.5mm/s. - Retraction speed 45mm/s. - Motor power 4 HP (3ph. 400v 50Hz). - Stroke regulation by means of limit switches, with automatic retraction movement. - Pressure switch for maximum pressure regulation, with automatic retraction movement. - Activation of the machine by means of two-hand safety activation CAT.4. - LED lighting in the work area - Fixed side guard. - Machine color blue RAL5021 Scope of delivery: - User manual in ENGLISH with technical data for machine maintenance, machine in accordance with CE regulations. Cgslrsuhchcsfbfbst - The quoted price does not include any additional protective measures such as safety guards, fences, barriers, etc.; these must be taken into account depending on the location and specific working conditions.

Condition: new, The HPK A series is a series of hydraulic presses with a C-shaped design for deep drawing, forming, and notching processes. These machines are manufactured in Europe, and all components and parts meet extremely strict quality requirements. The possible force ranges from 40 to 300 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Cgolrfbevq Ni Rofbst

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Colrjv T T Sbsfbfbjgt Stroke 300 mm Drive 7.5 kW Weight 6 tons Price: €6,000 plus VAT, ex location

Condition: used, Year of construction: 1984, Price: On request Horizontal bending machine Model: Hydraulic Manufacturer: SKODA Type: COCI 200-AF Year: 1984 Capacity: 200t Max. stroke: 350mm Cslrev Ul Nnefbfbsgt Including multiple dies and peripherals Machine-dimensions: 4000x1000x2350mm Machine-weight: 13000kg - Year: 1984 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Cgjlrjwbt Uqofbfbst Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Colrfbfevuuckebogt press can be inspected in running condition in our warehouse

Condition: like new (used), Year of construction: 2022, Here are the technical data of the machine on offer: If the press does not exactly match your requirements, please request an individual offer tailored to your needs with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! ##### Technical data + information: ME-A-2025-045 50 ton C-frame press 700x450mm with options CONTROL: SEMI-AUTOMATIC: Two-hand operation or foot pedal Microswitch for adjusting the cylinder stroke. AUTOMATIC: Double button with synchronism, Microswitch for stroke adjustment, CPU Siemens S 7 1200, Hydraulics: Rexroth solenoid valve group. Safety technology: Light barrier at the front Technical data: Pressing force: 50 tons Height of the machine: 2100 mm Width of the machine: 1200 mm Depth of the machine: 1300 mm Distance to the ram center: 250 mm Work table height: 850 mm Lower work table dimensions: 700x450mm Ram/plate: 550x300mm Open height: 400mm Maximum stroke: 265mm Approach speed: 32 mm/sec. Working speed: 6.3 mm/sec. Power: 4KW Weight: approx. 1,750 kg Year of manufacture 2022 Not included: - Transport not included. - Electrical connections to the power grid or peripherals not included. - Unloading, cranes, lifting devices, scaffolding, etc. not included. Training, commissioning: not included (C-press, hydraulic press, hydraulic press, single-column press) ##### Are you looking for a machine that fits your needs? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, European machinery guidelines (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which is based on these. Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and shears at surprisingly low prices. The hydraulics of the presses are mainly made using components from leading European manufacturers. Cslrfbov A S Srefbegt

Year of construction: 1992, Condition: good (used), H Bret press Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Year: 1992 Celreiuc Nwefbfbogt Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Turn over to pressbrake possible!

Year of construction: 1985, Condition: good (used), Met International Used Hydraulic press Forming press 40ton Bed size 600mm X 600mm Cslren Awfyjfbfbsgt Four poster hydraulic press. H frame / C frame also available. Many other used presses for sale with cushion, different daylight and stroke. New hydraulic power presses available built to your specification. Cheap hydraulic presses. Large and small bed sizes available. Delivery and installation can be arranged.

Condition: used, total height: 3,400 mm, total width: 2,000 mm, total length: 1,100 mm, outer dimension width: 2,000 mm, Empty weight: 5.000 kg Price: On request - Documentation available: No - Serial number: - Control: Conventional - Motor power: 17.0kW - Table width: 560mm - Throat depth: 360mm - Table length: 750mm - Ram width: 400mm - Ram length: 530mm - Model: Hydraulic - Max. stroke: 500mm - Number of columns: 1 - Power: 100.0ton Cgjlrfbov Ul Iqefbst - Transport dimensions: 1100mm x 2000mm x 3400mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, total height: 29,500 mm, total width: 11,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 110 mm/s, overall weight: 3,000 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 13 kW (17.68 HP), PYE 40 S1/M hydraulic press. Cjlrjtzxqnjfbfbegt Year of manufacture 1989. manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Upward speed 450 mm/sec. Power requirement 13 kW. Weight 3180kg. Height 2950mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz Cjlret A U Irofbfbsgt

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, total height: 2,620 mm, table height: 1,114 mm, total width: 850 mm, total length: 1,869 mm, pressing force: 30 t, table width: 600 mm, table length: 600 mm, overall weight: 2,900 kg, Weight approx. 2,900 kg Table top size 600x600x100 mm, plus 50 mm free space behind the top up to the back of the press Cgolrfevhcykobfbjt Fixing points of the table in 600, 800, 1000 mm. Ram travel 400 mm Motor 3 KW 60 liter hydraulic tank Speed downwards 10 mm/sec. Upwards 24 mm/second

Condition: new, die cushion stroke: 200 Celjd Ab Ikorfbfbsgt

Condition: good (used), Year of construction: 2002, Functionality: fully functional, total height: 3,600 mm, table height: 850 mm, installation height: 500 mm, total width: 1,200 mm, total length: 1,500 mm, throat depth: 250 mm, pressing force: 50 t, table width: 800 mm, table length: 500 mm, overall weight: 4,450 kg, Hydraulic C-frame press, capacity 50 to, table size 800x500 mm, stroke 500 mm, motor 22 kw, dimension 1200x1500x3600 mm, weight ca. 4500 kgs; 2-hand-operation, light-barrier-security Cslrfst Ri A Tobfbegt

Year of construction: 2001, Condition: good (used), Offer 20202 Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection Cgjlep Dt Taerfbfbst - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Condition: used, Single column hydraulic press MAE type S63SZ SO . 551277 Year of construction approx. 1977 Pressure force 63 ton. Throat 320 mm Cgolrfbodzp Trsfbjt Table surface 850 x 630 mm ram surface 1050 x 500 mm Plunger stroke 500 mm Installation height max. approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 litres Drive power 15 kW Power supply 380 Volt, 50 Hz - Hydraulic drawing cushion under the table with holes through the table top - 2-hand control - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 ton. The machine is working, the switch cabinet is mechanically damaged. During the test run, the machine reaches a press force of 50 tons, presumably a pressure relief valve is escaping.

Condition: new, die cushion press capacity: ohne Cgelrfsd Ab Ipebfbet