BODINI 201-10/66-11V Bottle Washer (1999)

BODINI Flaschenreinigungsmaschine

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Dkedpfst Ul Exjx Ag Aoi

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Dkodpjl Hx Adsfx Ag Aji

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Dkjdpfx Ajvu Tt Iog Aji Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Dksdstrbrqjpfx Ag Aji

Condition: used, Year of construction: 2011, operating hours: 35,000 h, machine/vehicle number: LC581, Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 250 ml Dsdpfxoyhbpzj Ag Ajki Can end: 200 end (industry size 200) Monoblock configuration: filler–seamer integrated block for minimized DO pickup Formats & Throughput Primary can size: 250 ml Line speed: up to 14,000 cph (format- and product-dependent) Process Equipment Included Kaeser compressor package with booster and two air receivers (p.y. 2010, start 2011) CIP station, three tanks (p.y. 2011) Syrup room with cooling system (p.y. 2011) Nagema mixer (p.y. 1992) Five ready-to-drink tanks, 100 hl each, steel with food-grade lining Beverage filter (p.y. 2011) Frezart can depalletizer (p.y. 2009, start 2011) Two can washers adapted to 250 ml (p.y. 2011) Hermis tunnel pasteurizer (p.y. 2015) Stratec can fill level inspector (p.y. 2000) Victor can printer / coder (p.y. 2020) Kisters packaging machine (p.y. 1993) Keber palletizer (p.y. 1997) Sita pallet wrapper (p.y. 2011) Complete conveyor system interconnecting all machines + two can accumulation turntables (p.y. 2011) Thermo-shrink labeling line for blank cans (p.y. 2015) Advanced Automation & Control Systems In-line quality control: Stratec can fill-level inspection for continuous monitoring and reject of out-of-spec containers Product identification: Victor industrial can printer for date/lot coding CIP capability: three-tank CIP station supports hygienic cleaning cycles for filler and product pathways Integrated conveying and accumulation: conveyors with two turntables provide smooth flow and buffer management to protect uptime Detailed electrical and controls documentation is available on request. Production Line Integration Capabilities Upstream Depalletizing of empty cans (Frezart) and transfer to washing Dual can washers adapted for 250 ml format Syrup room with cooling, beverage filtration, and mixing (Nagema) for consistent syrup preparation Compressed air supply package (Kaeser) with booster and storage Filling & Seaming Isobaric filling with 45-valve Ortmann Herbst filler ensures stable carbonation retention Ferrum 706 can seamer with 6 heads for reliable double seam integrity on 200 ends Downstream Hermis tunnel pa...

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Dsdstxd A Sjpfx Ag Aoki

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Dkedpfotwqzlox Ag Aji

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Dsdpfxjxqmrfs Ag Aeki Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: good (used), Year of construction: 2001, Krones bottle washer, year of manufacture 2001 Djdpfox N I R Nex Ag Aski 676-039 6000 bottles/hour, 0.2l-1.0l bottles Machine will be available in December 2026 6000 bottles/hour

Condition: ready for operation (used), Year of construction: 2005, GAP-027-0033 Unpacker, make BMS, type: Lina EP, with each 3 heads, with pack head magazine for 0,33 lt. longneck bottle + 0,5 lt bottle, format 4x6 / 4x5, with SPS-control, built 2005, already dismantled, ex location for sale. Dedpfopm Hqzsx Ag Aeki GEP-028-0034 Packer, make Datz, type: EP-2, with 2 heads, for 0,33 lt longneck bottle + 0,5 lt bottle, crate format 6x4 and 5x4, Height of crate inlet 270 mm, height of bottle outlet: 890 mm, built 2000, dismantled, for sale