Autoclave

Bosch/SBM ADV ADV 12 09 12/2

Condition: ready for operation (used), Autoclave for cans Kdjdpfxjyyvi Ie Aklsr

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Kodpfx Asw Hz T Eekledr

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Kdedpfx Akotndpzjljr Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Schubert TLM-F2 / F44 Packaging system for bottles and folding boxes in cartons with subsequent palletising. Fully automised packing system. Pick a bottle and place in box. Place a box on pallet. Acceptance of bottles and folding boxes - Pre-grouping of bottles or folding boxes - Erecting cartons from flat blanks using hot glue - Filling the pre-grouped products into the erected boxes - Closing the filled boxes with hot glue - Weighing and labeling of the sealed boxes - Palletizing the boxes Kdodpfx Akek Ttykolsr

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, tank capacity: 310 l, wall material: stainless steel, operating temperature: 220 °C, warranty duration: 6 months, Equipment: CE marking, Used FIREX Cucimax CBTG 310 Cooking/Frying Kettle Technical Data: - Gas heating, - Capacity – 310 litres, - Direct jacket heating with or without pressure cooking, Kodpfxexnkdyo Aklsdr - Agitator direction settings: LEFT/RIGHT and PAUSE - Cooking and frying vessel made of 12 mm AISI 304 stainless steel, - Counterbalanced gas spring lid made of AISI 304 stainless steel, - Removable lid for cleaning, - Easy service access, - Temperature control from 20° to 220° C, - Automatic mixing with PTFE scrapers, speed control, and reverse function, - Folio touchscreen control panel, - High-efficiency tubular burners for gas models, INCOLOY-800 alloy armored elements for electric models.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, FOOD STERILIZATION DEVICE EQUIPPED WITH FLOW METER, HEAT EXCHANGER, AND CHAIN CONVEYOR FOR BASKETS Kdsdpow Ekkdsfx Akljr

Condition: good (used), Year of construction: 2021, Electrolux Smart Variomix 300L Boiling pan 2021, Stainless, 300L cooking kettle, electrically heated, 52Kw, max temp 127'c, with spare mixing arm and box of spare parts, 3Ph Kdedpoyzipqsfx Akljr

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Machine surface (without "turntable"): 23.49 m² Machine surface (incl. "turntable"): 26.77 m² Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Kjdpjwqp Npjfx Aklodr Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau TheNetherlands Email: info at deleeuw-machinehandel.nl

Year of construction: 2008, condition: like new (used), functionality: fully functional, GETINGE GEVC 6712 AC-1 Kodpfxsv Iz H Ns Aklodr ID.NO. 2921 Getinge mod GEVC 6712 AC-1 Autoclave with associated steam generator. The system has previously been used in medicine & is in new condition! Dimensions 127 x 160 cm H 215 cm.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) Kjdpfx Akslhqndolodr - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm