General Location Bremen Condition used Other The stand agitator is equipped with 4 rollers, 2 swivel and 2 fixed rollers each. The inner width of the H-frame is 850 mm, so that e.g. 220 L barrels can be processed. Total height 3600 mm.
Mixers EX-protected Motor is ex-protected according to the type plate (due to the new ATEX regulations, use in potentially explosive areas is not permitted without conversion/retrofitting) Manufacturer Mixer Fluid Mixer Propeller Speed 1420 rpm Voltage 500 Vo...
Used Hosokawa Micron model 100 RB-4 304 stainless steel conical mixer. Unit is immediately available for sale.
10,000 litre capacity.
Mixing cone 3,300mm diameter X 4,935mm high.
Stainless steel screw driven by 11 kw 380 volt 3/50 motor and gearbox.
Stainless steel orbit arm driven by 1.1 kw 380 volt 3/50 motor and gearbox.
Flat lid with (2) manway covers. Has radial screw bottom bearing. Includes (4) 125mm diameter bottom discharge connections. Mounted in support ring.
** Process Equipmen...
Granulator - High Speed Mixer , Brand GEA Collette (B), Type Gral-150, Mach.No. 79MG15014, Material Stainless steel, Capacity 150 ltr, Vessel sizes dia. 690x450mm, With cover , With motor 11-7,5 kW 380 Volt, With lump breaker , Year of construction 1979, With switchgear , Floorspace 2,6x1,2 M,
O3gwz
Mixaco Mixer with container ( pots ) for sale. More photos will come soon.
I2wv9qwza
Water bath & Mixer IKA RW20 & Heating E.SCHORI EL 16 , Stainless table L x W x H: 1,6 x 1 x 0,8-0.9m H, glass vessel 20L with agitation, and divers material
Bu8uv3fxji
Parts shown by hand not come.
Suw33c
General Location Bremen Condition used
Agitators EX-protected Motor is ex-protected according to the type plate (due to the new ATEX regulations, use in potentially explosive areas is not permitted without conversion/retrofitting) Agitator Propeller Speed 1440 rpm Voltage 380 Volt Power 3.6 KW Material in contact with product V4A 1.4401/04 (316) Type plate Agitator Equipment Stand mounted agitator; hydraulic lifting column Shaft length 1065 mm Shaft diameter 35 mm Blade diameter 190 mm
Gkv3jagla
Used Silverson model GX10 stainless steel high shear mixer for sale.
4-blade rotor direct driven by 7.5 kw 400-690 volt 3/50 2885 rpm motor. Approximately 1220 mm shaft length with 150 mm diameter general purpose disintegrating head.
Mwgflg
This unit is located at Perry Process Equipment Ltd UK. To arrange a site inspection or for further details, please request a quote.
** Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in...
Homogenizer
Ratcfw89r
Centrifugal
Suction tube diameter: 80 mm
Pressure port: 80 mm
Blade diameter: 250 mm
Second-hand mixer/ granulator GEA Collette GRAL 75 disigned for wet granulation process with double jacket
CE, GMP and FDA conform.
Year: 2000
Volume: 75 L
Mixing volume: 25-50 L
Spannung: 380/220 V, 50 Hz
Mixer: 3 inclined blades, cetral located, mixing speed continuously adjustable 30-305 rpm, material 14404 resp. electropolished.
Chopper: two downward knives, eccentric, protrudes from the top of the container, 1460/2870 rpm electropolished,
Container is equipped with light.
Double jacke...
The Double Z Mixer is a powerful mixer for mixing high viscosity products. It is used by pharmaceutical companies, food companies (energy bars, protein bars, chewing gum), in the chemical industry (silicone rubber, sealant, adhesives, pigments, etc.) or construction.
Capacity: 50 litres.
All parts in contact with the mixture are made of food-grade stainless steel.
Bubk0uqj0l
CE certified for food use
High power motor: 5 KW.
External heating jacket (electric).
Electric tilting of the tank (it is ...
Manufacturer Draiswerke GmbH Mannheim, Type T-85 , Mfrd. 1975, Material V2A, Turbulence mixer (1x), T-Bucket , Capacity 85 Ltr, Bowl dimensions dia. 770x700mm, Cleaning flap 500x240mm, Discharge dia.500mmx250mm, With double jacket, Motor 7,5 KW, 380 Volt, Continuously variable drive , Built on a frame , Space requirement 1,4x1,0 M, Total height 1,4 m. You are welcome to visit the machine in A-3232 Bischofstetten.
Hy9zevap
General Location Bremen Condition used
Agitators EX-protected Motor is ex-protected according to type plate (due to the new ATEX - regulations the use in explosion endangered areas is not allowed without modification/retrofitting) Agitator Propeller Speed 757 rpm Voltage 230/400 Volt Power 0.55 KW Material Product contact V4A 1.4571 (AISI316) Type plate Shaft length 2000 mm Shaft diameter 40 mm Blade diameter 160 mm
Y2en8
Used Tatham approximately 1,000 litre stainless steel twin shaft paddle mixer.
Mixing trough approximately 1700mm wide x 1500mm long x 1450mm deep.
Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor.
Has pneumatically operated twin bomb door discharge.
Unit mounted in mild steel frame.
Also includes discharge hopper and inclined stainless steel screw feeder measuring approximately 3400mm long x 250mm wide x 200mm deep and driven by a 1.5kw 220/340 380/415 volt 3/50 1420rpm motor.
...
Gross capacity: 50 litres
min. operating capacity: 12 litres
Eefsfbyoc
Maximum operating capacity: 33 litres
internal height: 320 mm
Weight: 850 kg
The machine consisting of:
1.Roto mixer granulation
2.Oildinamic unit
3.Vakuum-/ condensation group
4 heating system
Technical documentation available.
Output max. 20000 l/h
Dispersing machine for continuous operation.
max. delivery pressure 2,5 bar.
G2he3iro8
Zeppelin ( Henschel ) Bonding Mixer type MB 10 for Laboratory and a production bonding mixer KM 1750. The production bonding mixer was never in use. Built 2015
More photos you will get later
3okrg8o
Used Collette high shear granulating mixer, model GRAL1200, 316L stainless steel construction, rated 7 bar internal, 3 blade main agitator with 55 KW (73 HP) motor, hydraulic bowl raise/lower mechanism with 5 KW (6.7 HP) power pack on base, side discharge with pneumatically operated plug valve with controls, serial# 97GR112000018, built 1998. sku-30079
Bo3fym8uut
General condition used
Agitators EX-protected Motor is EX-protected according to type plate (due to the new ATEX regulations, use in potentially explosive areas is not permitted without conversion/retrofitting) Agitator Propeller Speed 1410 rpm Voltage 220/380 Volt Power 0.37 KW Material in contact with product V2A 1.4301 (AISI304) Name plate Agitator Equipment Propeller hinged; slight differences in the design of the agitators e.g. in the shaft length (mostly approx. 400 mm) Shaft diameter 18 m...
Used Babcock Gardner Type 100L stainless steel ribbon blender.
Bswhlxqhzu
100 litre working capacity.
Mixing trough approximately 350mm wide x 500mm deep x 1000mm long.
Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3.
** Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and c...
Model Gral 300
Total contents 300 litre
Jacketed bowl with trolley
Useful contents 1/2 tot 2/3
Power of mixer motor 16 -24 kW- double speed
Rotation speed mixer arm I speed : 120 - II speed : 185 rpm
Power of chopper motor 7- 9 kW – double speed dahlander
Rotation speed chopper arm I speed : 1297 - II speed : 2524 rpm
Hydraulic motor 1,5 kW
Bowl Doubel wall jackted suited for heating and cooling
Dimensions
Fwztltiga
Height 2.900 mm
Depth 1.600 mm (without valve)
Width 1200 mm
ALL PRODUCT...
plough share mixer, speed regulation
stainless steel
Bjkugce8a
content 5 ltr
This listing is for a 1993 BALLESTRA 145 MX1 High Shear Mixer.
- Continuous High Shear Mixer
- Tungsten mixing heads
Stock Code: BFPO041
Fogjwqi
Used A Berents BECOMIX planetary mixer, model RW 30, stainless steel construction, 60 liter total capacity, 30 liter working capacity, chamber rated -1/2 bar(-14.5/29 psi) at 134 c internal, jacketed for 4 bar(58 psi) at 152 c, top mounted variable speed agitator with side wall scrappers, bottom mounted homogenzier, dome top with lift/lower mechanism, 3/50/400 volt, Fabr# 011/1-787, built 2000. sku-2660-12
Hwn8dx9m0
General Location Bremen Condition unused
Bi8amn7ebp
Agitators Speed 2885 rpm Voltage 230/400 Volt Power 0.75 KW Material in contact with product V4A 1.4401/04 (316) Name plate Agitator Equipment Shaft length incl. agitator element measured Shaft length 380 mm Shaft diameter 25 mm Blade diameter 47 mm
Used Lödige model FKM 2000D stainless steel ploughshare mixer. Approximately 2,000 litre total capacity and 800-1400 litre working capacity.
Mixing chamber has carbon steel jacket.
Ploughshare mixing blades driven by 55kw, 2960rpm, 3/50 motor via a gearbox.
Has provision for choppers but none currently fitted.
Has (2) side inspection doors and (2) bottom discharge outlets.
** Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipme...
Gardner Drum mixer blender
Bfxhwo0pgp
S/N 00-6919
Stainless Drum Mixer/Blender, variable speed, with Brook Crompton Series 200 Controller, stainless mesh guarded cage, 1Ph
This listing is for a 1998 BALLESTRA 145 KX1 Kettemix Reactor High Shear Mixer.
- Continuous High Shear Mixer
C7oglgj
- Tungsten mixing heads
- Size: 800x2000mm
- Equipped with independent drives to the shaft and the fan
Stock Code: BFPT059
Used 150 liter Pellegrini planetary mixer, stainless steel construction, approximately 28" diameter x 18" straight side, flat top, dish bottom mixing vessel, jacketed for 3 bar at 144 c, top mounted 1.8 kw variable speed agitator drive with anchor agitator with pneumatic lid raise/lower mechanism, 2" bottom outlet and tilt discharge design, floor mounted with operator panel, serial# 20564/94MI, NR# 749, built 2009. sku-3394-24
Bmmvdg0noe
General condition used
K2ktezn
Mixers EX-protected Motor is ex-protected according to name plate (due to the new ATEX regulations, use in potentially explosive areas is not permitted without conversion/retrofitting) Manufacturer Ekato mixer Propeller speed 123 rpm Voltage 220/380 Volt Power 0.75 KW Material in contact with product V4A 1.4571 (AISI316) Name plate Shaft length 755 mm Shaft diameter 45 mm Blade diameter 500 mm
Used Netzsch model PMD Pharma 50 stainless steel pre-mix disperser.
Approximately 50 litre working capacity.
Jacketed chamber with mechanical seal.
Has welded conical bottom and bolted dished top heads.
Unit has top entry stainless steel agitator driven by a 15kw 3/50 2900rpm motor.
Includes hydraulic powerpack driven by a 1.1kw 3/50 1415rpm motor for agitator raise and lower.
Has bottom entry stainless steel scraped surface agitator driven by a 1.35kw 3/50 142-1420rpm motor.
2ekldmxt
** ...
Newmix
Atmi life sciences
Double jacketed paddle mixer 15883-005
P7m38v
2011, Stainless pharmaceutical mixer with 500L double jacketed mobile holding vessel, touch screen controls, Min - Max temp 0-90' degrees, jacket volume 6L, 1Ph
This listing is for a 1998 MORTON KM20004ZF Ploughshare Mixer.
Continuous Ploughshare Mixer
Capacity: 2000 Litre
Motor: 30k
Gxagks
Motor Speed: 1500
Stock Code: BFPT084
Machine location is USA but we can support transport and inspection around the world. sku- 2908-1
Gb2qvnop
Unused 600 liter GEA high shear mixer, model PMA 600 Advanced, 316L stainless steel product contact surfaces, 240-450 liter working capacity, 36 kw main impeller, 1-170 rpm, 11 kw chopper, 1000-3000 rpm, jacketed bowl, machine designed to 16 bar shock rating, full vacuum rated bowl, 8" side discharge with valve, integrally mounted Quadro Comil, model U20, integrally mounted blade hoist, a...
General condition used
Stirrer manufacturer Stirrer Stelzer Speed 760 rpm Voltage 220/380 Volt Power 1.1 KW Material in contact with product V4A 1.4571 (AISI316) Nameplate Shaft length 310 mm Shaft diameter 40 mm
N0rjj
Used refurbished Loedige model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer.
Has 300 litre working capacity and 600 litre total capacity.
Boixiq9ml2
Mixing chamber 630 mm diameter X 2000 mm long.
Has carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C.
Stainless steel ploughshare blades belt driven by 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox. Includes (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 ...
This listing is for a 1993 MORTON KM3000 Mixer.
Working Pressure: 5bar
Working Temperature: 158c
Hydraulic Test Pressure: 9.4bar
Bnflqojsck
Stock Code: BFRA002
General Location Bremen Condition used
Ddvvna8
Agitators Agitator Cup agitator Speed 60-420 rpm Voltage 220/380 Volt Power 1.1 KW Material in contact with product V4A 1.4401/04 (316) Year of construction 2009 Type plate Agitator Equipment The lifting height is approx. 1,130 mm from the upper edge of the foot crossbar to the lower edge of the agitator (from the bottom to the lower edge of the agitator approx. 1210 mm). shaft diameter 30 mm blade diameter 200 mm
Used Winkworth model GU22 stainless steel ribbon blender. Approximately 450 litre working capacity and 660 litre total capacity. Cantilevered mixing trough approximately 570mm wide X 685mm deep X 1750mm long.
Single interrupted ribbon direct driven by approximately 5 HP 415 volt 3/50 variable speed motor.
29nhpem
Has bottom outlet with MUCON iris valve mounted on cantilevered base supplying approximately 1200mm discharge height.
Unit has hinged lid. Includes local control panel.
** Process E...
This listing is for a 1970 MORTON FKM3000D Plough Shear Mixer.
Mixer type: Stainless steel ploughshare
Total Volume: 3000L
Inner: Stainless Steel
Controls: Included
Previous use: Detergent powder
Jacket pressure: 5 bar
Includes Rotary Screw Powder Conveyor
Mounted on load cells
Stock Code: BFES005
Mvj29k
Used refurbished Herbst model HRZ-H 200, approximately 200 litre capacity stainless steel horizonal T-arm mixer.
Vtqcqi
Stainless steel cylindrical chamber measures approximately 850mm long x 550mm diameter.
Stainless steel shaft with T-arm blades driven by 4kw 1480rpm 230-400 volt 3/50 motor and gearbox.
Unit is mounted on stainless steel frame. Spares package available for this machine.
Unit has been refurbished at Perry Process Equipment Ltd UK. Contact us for further details on the work,...
This listing is for a 2003 GERICKE GCM 1200 Continuous Mixer.
Brsh8hhdod
Gericke machines and processes have been setting the standards in mixing technology since 1894. They produce high-quality intermediate and end products with maximum homogeneity. Extremely fragile products are handled very gently. Micro ingredients are accurately mixed.
Capacity throughput: up to 60,000 litres per hour
Drive Speed: 1400rpm
Mixing tool speed: 51rpm
Tangential speed of mixing tool: 1.28 m/sec
Weight: 450kg
...
Used Alfa Laval approximately 18 CUFT (510 litre) total capacity and 9 CUFT (255 litre) working capacity stainless steel V-blender.
Has (2) approximately 600mm diameter X 600mm straight side shells. Has (2) approximately 406mm diameter inlets and (1) 203mm diameter outlet.
Bouodl2ovt
Direct driven by 5.5 kW 380 volt 3/50 1450 rpm motor and gearbox at 32 rpm.
Mounted on stands with base. Also includes control panel.
** Process Equipment Ltd buys and sells high quality used and refurbished pro...
This listing is for a 1991 MORTON FKM 1200D Ploughshare Mixer.
Total Volume: 1200L
Construction: Stainless Steel vessel
Controls: Included
Oixon
Previous use: Detergent powder
Stock Code: BFPM005
Used Winkworth model GU430 stainless steel ribbon blender. Approximately 430 litre working capacity and 570 litre total capacity (Product Dependant).
Bounrpu7dx
Cantilevered mixing trough measures approximately 1,500mm long x 600mm wide x 700mm deep.
Single interrupted ribbon direct driven with electic motor/gearbox. Unit has counter-balanced hinged lid.
Bottom discharge but no valve fitted.
** Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide...
Used Winkworth model UT300 stainless steel ribbon blender. Approximately 300 litre working capacity (Product Dependent).
Mixing trough measures approximately 1150mm long x 575mm wide x 650mm deep.
Has stainless steel single interrupted ribbon driven by 4kw, 1430rpm, 3 phase, 50hz electric motor through Custom Power Transmissions gearbox.
Has stainless steel hinged lid.
Includes off-centre bottom discharge but no valve fitted.
Unit has recently been refurbished at Perry Process Equipment Ltd...
Used refurbished Babcock Gardner model 800H stainless steel horizontal ribbon blender.
Approximately 800 litre working capacity and 1250 litre total capacity. Has approximately 770mm wide x 2300mm long x 800mm deep mixing trough.
Stainless steel interrupted ribbon driven by an approximately 15 kw motor through a gearbox.
Unit includes centre bottom manual discharge. Includes stainless steel lid.
Bokiqy0ife
Unit was recently refurbished at Perry Process Equipment Ltd. Contact us for further d...
Used Winkworth Model UT300 stainless steel ribbon blender. Approximately 300 litre working capacity (Product Dependent).
Mixing trough measures approximately 1150mm long x 575mm wide x 650mm deep.
Has stainless steel single interrupted ribbon driven by 4kw, 50hz electric motor through Custom Power Transmissions gearbox.
Has stainless steel hinged lid. Includes off-centre bottom discharge but no valve fitted. Spares package available for this unit.
Bokibsojhr
Unit has recently been refurbishe...
Used Winkworth model FU42MS carbon steel ribbon blender. Approximartely 2,000 litre working capacity and 2,800 litre total capacity (Product Dependent).
Mixing trough measures approximately 2400mm long x 1070mm wide x 1200mm high.
Has mild steel single interrupted ribbon driven by 18.5kw, 1460rpm electric motor through a gearbox.
Unit has hinged lid.
Includes centre bottom discharge but no valve fitted. Unit is mounted on mild steel base.
Bq3rdtlkgu
NOTE: We have 2 units available.
** Proc...
Aycliffe Business Park, Station Rd, Newton Aycliffe DL5 6EQ, UK