Overhead crane

Bovenloop kraan enkelligger 5000kg 14580 Demag

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 13,450 mm, total width: 4,135 mm, total length: 3,092 mm, load capacity per storage section: 400 kg, input voltage: 400 V, load capacity: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Approximate number of trays: 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid unless the system is sold. Technical specifications per Logimat: - Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity: approx. 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray tare weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Integrated LogiTilt - Integrated LogiPointer - Integrated LogiGate - Integrated LogiStainless Dcsdperu A Atefx Addsr Machines have been professionally disassembled and can be reassembled by the same technicians if required. Photos and videos of operation and disassembly available on request by email. Price: special export price Price: excl. VAT Delivery time: in stock We have three Schäfer Logimat units available in stock. Machinehandel De Leeuw BV specializes in used paternoster systems by brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms Dcedefg E Hwjpfx Addor • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Dcjdsd Spf Rspfx Addjr Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: ready for operation (used), Migatronic MTE 440 TIG AC / DC welder for steel and alumminium. Water cooling Migatronic CTU 3000. The maximum welding strength is 440 A. Tested by EWM service. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Dcsdpfx Aoh Ib Idsdder If you have any questions you can contact us by phone. Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article can happen and remain reserved. Shipping is exclusively to traders - for private consumers only a pickup is possible.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in Dcodpjfg E Hpefx Addjr place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 1997, condition: ready for operation (used), overhead travelling cranes, 19 meter span, 2 units of 20 tons each and 3 units of 16 tons each, 10 meter lifting height Dcedpfx Asw S D Uuoddjr

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment. Dedevwm A Ijpfx Addscr

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW Dcedpfsd Iipmex Addsr weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Dcsdsxdt Umepfx Addjr Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 110-044731, Offer 25160 Technical data: - Load capacity: 3200 kg - Track gauge approx.: 9090 mm Dcsdpsw S D Emjfx Adder - Clearance height approx.: 360 mm - Beam length approx.: 2400 mm - Wheelbase: 1900 mm - Hook travel approx.: 6000 mm - Reeving: 2 / 1 - Speeds: - Trolley travel approx.: 20 m/min + 5 m/min - Hoisting approx.: 5 m/min + 0.8 m/min - Crane travel approx.: 20 m/min + 5 m/min - Operation via radio remote control - Crane total weight approx.: 1600 kg