Catalog No. : 5360
Type: MS 48 Sp
Producer: HS
Made in: 2008
Characteristic:
Maximum width of the sheet metal: 1000 mm
Maximum sheet weight: 1300 kg
Diameter of roll: 148-156 mm
Coil: 1020 mm
Weight: 700 kg
7pdv7hm
Equipment:
Electrical switchboard with control
pressure 025 t
throat 250 mm
stroke 300 mm
total power requirement 12 kW
weight of the machine ca. 3,5 t
dimensions of the machine ca. 1,4 x 1,3 x 2,3 m
Cglmuwkc
material width 1650 mm
material thickness 6 - 20 mm
no. of straightening rolls 11
straightening feed 10 m/min
straightening roll diameter 160 mm
adjustment 10- 40 mm
total power requirement 76 kW
weight of the machine ca. 39,2 t
F9zsezl
Machine does have exchange cassettes of rolls. We supply 1 set of extra
cassetes along with the machine. Rolls are supported by backup rolls.
plate width: 1250 mm
plate thickness: 4 mm
smallest sheet thickness: 0,6 mm
distance between columns: 1500 mm
control: SPS S7 300
Number of Straightening rolls: 21 Stück / pieces
straightening feed: von 10 bis/up to 20 m/min
roll diameter: 60 x 1400 mm
number of rollers: oben/up/arriba: 10 St.
number of rollers: unten/down/abajo: 11 St.
current capacity: 72 A
total power requirement: 33 kW
weight of the machine ca.: 13,5 t
dimensions electric cabinet: L:0,6 x B:0,8 x H:2,6 2550 m
dimensions L x...
material width:420 mm
material thickness:0,5 - 6,5 mm
no. of straightening rolls:9
straightening roll diameter:50 mm
Yr2ivw
speed:0 - 20 m/min
Power capacity:5,5 kW
Weight:3,1 t
Dimensions (WxDxH):1,6 x 1,4 x 1,8 m
Sheet width: 120 mm
Sheet thickness: 1- 1,5 mm
Number of straightening rolls: 19 pcs
Straightening roll diameter: 12 mm
Straightening width Cross section; 150mm2
Speed ; 0-40m/min
working direction ; left to right
Buagbe0vs3
Voltage 380V; Frequency 50Hz
2 height-adjustable roller conveyors with weight compensation via springs
Bsng0vunnp
material width:260 mm
Y7na9dmm8
total power requirement:4,5 kW
dimensions of the machine ca.:1,15 x 2,90 x 1,80 m
PIESOK - XRM 2000/6,3 - 1981- min/ max thickness 1,6/6,3 mm (50 kp mm2) ..... 7 mm (37 kp mm2)- width 2200 mm- number of rolls 11- roll diameters: 90/94/95 mm- roll length 2200 mm.- distance between rolls 105 mm.- number of rolls (5+6=11).- max sheet thickness 6,3 mm.- min sheet thickness 1,6 mm.- speed 12 m/ min.- motor 20 kW- weight 12500 kg- can be shown under power in working condition but needs new electric cabinet
7jd0mly
material width: 650 mm
material thickness: 0,6 - 1,0 mm
no. of straightening rolls: //3
no. of straightening rolls: unten/down/abajo:3
diameter of upper rolls: Ø 71 x 690 mm
diameter of lower rolls: Ø 71 x 690 mm
throughput speed: 50 m/min
height over floor: 1400 mm
total power requirement: 14 kW
weight of the machine ca.: 1,4 t
dimension machine xH: 1,35 x 1,4 x 1,8 m
- 3 pcs feeding rolls Ø 80 x 680mm, not adjustable, revolving
- upper rolls: 3 pcs bending rolls Ø 71 x 690mm, adjustable appro...
leveller ARKU 1012.1/19 with the dimensions 120 x 2 mm, 19 rolls, diam. of the rolls 10 mm, under power in good condition, tests with material is possible
Bt79fzjdfe
Dimension range: 10-50 mm round tube, power: 5.0 - 10 kW.
Number of rollers: 6 (3 over 3).
Gowkbvfd8
Maximum diameter: 58.4 mm.
EXECUTION: PARTS LEVELER
daylight width 350 mm
O7tlr
material thickness max. 10,0 mm
leveling performance appropriate to the diagram
no. – leveling rolls 21 (10 x above / 11 x below)
leveling roll – Ø 50 mm
working speed 10 m/min.
power 9,5 kW
working direction left - right
required space (include 2 x roller table and control cabinet)
l x w x h app. 8.100 x 2.500 x 2.200 mm
weight 5,53 to.
accessories:
● control unit mounted on frame construction (jib)
● roll adjustment manually 2 x hand whe...
sheet width:0 mm
coil weight:0 t
coil internal dia.:0 mm
Y7nacp2q2
Capacity:1000 kg
total power requirement:0 kW
weight of the machine ca.:0 t
dimensions of the machine ca.:0 m
material width 125 mm
material thickness 2 mm
straightening feed 5 - 30 m/min
total power requirement 1,5 kW
weight of the machine ca. 460 kg
Cfhtnbs0
swiveling straightening unit
plate width: mm
coil weight: t
coil internal dia.: mm
sheet width - max.: 800 mm
sheet width - min.: 300 mm
thickness of strip/band: 5,0 mm
Payload: 12,0 to (Coil)
band speed: 4,5 / 25 m/min
Bp9oq0lbad
work height max.: 1700 mm
total power requirement: PS
Weight approx.: 7,3 + 6,62 t
dimensions of coil: 3,2 x 1,9 x 2,7 + 6,62 to m
dimension machine xH: 2,5 x 2,6 x 2,45 + 7,3 to m
Decoiler with loading device
straightening unit:
Infeed rollers: 2 x Ø 144 x 850mm
Straightening rolls:
3 x botto...
material width 1250 mm
material thickness 2 - 7,1 mm
Gltpubl
no. of straightening rolls 17
total power requirement 50 kW
weight of the machine ca. 21,5 t
dimensions of the machine ca. 4 x 2 x 2 m
material width 80 - 400 mm
material thickness 2 - 12,7 mm
no. of straightening rolls 3-7
total power requirement 6 kW
weight of the machine ca. 0,9 t
dimensions of the machine ca. 1,5 x 1,4 x 1,7 m
Djklzfz
length x width x height 2.000 x 2.000 x 1.700 mm
weight 900 kg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags:
LEVELER - 6HI CONSTRUCTION
tensile strength 200 N/mm²
material width 1.500 mm
material thickness 0,10 – 0,80 mm
F7b70888g
daylight width 1.775 mm
no. – leveling rolls 23 (11 x above / 12 x below)
leveling roll – Ø 30 mm
leveling roll length 1.800 mm
no. – intermediate rolls 25 (12 x above / 13 x below)
intermediate roll – Ø 20,40 mm
intermediate roll length app. 1.715 mm
no. – support blocks 18 (9 x above / 9 x below)
no. – support rolls 207 (99 x above / 108 x below)
support rolls –...
sheet width - max.:130 mm
straightening roll diameter:40 mm
:5
Gxkimq7d3
:2+2
sheet thickness - min.:0,4 mm
sheet thickness - max.:3,5 mm
weight:0,4 t
dimensions of the machine ca.:0,6x0,65x1,15 m
with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via
analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm
control, very go...
TOS - XRM 160/3 - 1960
Mu0uvs
material width: 400 mm
material thickness: 2 mm
Number of Straightening rolls: oben/upper/arriba: 5x
Number of Straightening rolls: unten/lower/abajo: 6x
roll width: 410 mm
throughput speed: 9-20 m/min
total power requirement: 5,5 kW
weight of the machine ca.: 1,3 t
space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m
leveling machine with coil / machine has 11 rolls
- upper rolls adjustable around 14mm, 1st and last roll driven
- lower rolls not adjustable, driven
- each 1 intake/outp...
Comm. no. Lg 31920
Precision straightening machine Kohler 18.260 B
in good condition
year of manufacture 1985 - machine no. 40240
Technical data
passage width max. 260 mm
Bsokhozvyi
material thickness 0,3 to 1,5 mm
Number of straightening rolls 19
Straightening roll diameter 18 mm
Manual 4-point infeed of the straightening mill
throughput speed approx. 6 to 36 m/min.
Strip side guide unit for infeed side available
working direction from left to right
Painting similar to RAL 6000 patina green
L...
material width 250 mm
material thickness 2 - 4 mm
no. of straightening rolls 7
run-in height 1250 mm mm
strip intake tiltable, positiv 25 °
strip intake tiltable, negativ 30 °
total power requirement 3 kW
Bqcjwfrbwa
weight of the machine ca. 800 kg
dimensions of the machine ca. m
leveller KOHLER 260 x 3 mm, 18 rolls, diam. of the rolls 19 mm
O8n0n
under power, tests with material is possible
material width:120 mm
material thickness:0,3 - 2,0 mm
no. of straightening rolls:19
roll diameter:18 mm
speed:0 - 60 m/min
:150 kg
band width:120 mm
2p9yze
diameter of the mandrel:260 - 430 mm
external diameter:800 mm
weight of the machine ca.:0,85 t
dimensions of the machine ca.:2,35 x 1,07 x 1,52 m
material width 1650 mm
material thickness 6 - 20 mm
no. of straightening rolls 11
straightening feed 10 m/min
straightening roll diameter 160 mm
adjustment 10- 40 mm
total power requirement 76 kW
weight of the machine ca. 39,2 t
Bhyvy9xybb
Machine does have exchange cassettes of rolls. We supply 1 set of extra
cassetes along with the machine. Rolls are supported by backup rolls.
Number of Straightening rolls: 15 Stück
plate width: 1000 mm
plate thickness: 8 mm
smallest sheet thickness: 2 mm
distance between columns: 1340 mm
infeed width: 1280 mm
straightening feed: bis - up to 16 m/min
roll diameter: 100 mm
number of rolls: oben / upper / arriba: 7
number of rolls: unten/ lower/ bajo: 8 Stück / pcs
Total power requirement: ca. 31 kW
weight of the machine ca.: 21,5 t
dimensions L x W x H: 4,0x2,15x2,8 m
Machine is still in the technical department!
Optionally the machin...
material width 3000 mm
material thickness 0 mm
no. of straightening rolls 0
total power requirement 22 kW
weight of the machine ca. 14,5 t
dimensions of the machine ca. 7,5 x 2,5 x 2,9 m
D U N K E S
Hydraulic Straightening System for Flat material and Section Material
With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25
Year 1990 ( H 89-1960 )
_____
Consisting of:
Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of
Piston 160 mm, Straightening speed up/down 25/75 ...
Schubert wml 23-63-630 straightener
year of construction: 1983
Material width: 630mm
Material thickness: 0.4 - 10 mm
Number of straightening rolls: 23
Straightening roll diameter: 63 mm
Material cross section: 120 mm²
Workpiece dimensions min .: 40 mm
Throughput speed: 5 - 25 m / min
Weight: 4.9t
Bsy20qhvzb
Space requirement (WxDxH): 3.0 x 1.3 x 1.6 m
adjustable drive
LEVELER with motor
material width 150 mm
material thickness 0,10 - 0,40 mm
no. - leveling rolls: 20
leveling roll diameter 20 mm
Bshnzicg3s
speed 15 - 80 m/min.
required space app. 1,20 x 0,80 x 1,20 m
presentation under power is possible
sheet width:120 mm
coil weight:75 kg
Lrhgzor7
dimensions of the machine ca.:2,50 x 1,25 x 1,50 m
leveller HÄMMERLE 80/1250 with the dimensions 1250 x 20 mm, 9 rolls, diam. of the rolls 80 mm
Fvttnv8gq
material width: 200 mm
material thickness: 1,5 mm
Number of Straightening rolls: 5x oben/upper/arriba
no. of rolls: 6x unten/ lower/abajo
throughput speed: nicht bekannt/ unknown/desconocido m/min
current: 220/50 A/Hz
S8ummrdvf
total power requirement: 1,5 kW
weight of the machine ca.: 0,447 t
space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m
description:
machine does have 11 rolls
upper roll: width: 210mm, dia. approx. 60mm, driven adjustable
lower roll: width: 210mm, dia. appro...
Number of straightening rolls:7
Bsa9belgg0
diameter of rolls: Ø 80mm
max sheet width : 450mm
max sheet thickness: 4mm
motor: 5 kW
3-rolls plate bending machine WILHELMSBURGER Type DWV 20/2500
Manufacturer: WILHELMSBURGER
Made in: Germany
Specification:
Max. plate thickness: 23 mm
Max. plate width: 2500 mm
Working roll diameter: 400 mm
Dimensions: 6800x2000x2300 mm
Bq2eyw7i72
LEVELER - 6HI - EXECUTION
material width 1.530 mm
material thickness 0,60 - 5,00 mm
no. - leveling rolls: 19
leveling roll diameter 75 mm
leveling roll length 1.830 mm
speed 40 m/min.
machine weight app. 36,3 t
motor power 145 kW (double clasp brake - hydraulically)
no. - leveling rolls 19 (10 x above / 9 x below)
no. - intermediate rolls 21 (11 x above / 10 x below)
no. - support blocks 14 (7 x above / 7 x below)
no. - backup rolls 161 (84 x above / 77 x below)
length - leveling rolls 2.184 mm...
material width:140 mm
dimensions of the machine ca.:1,30 x 0,78 x 0,70 m
Jtzhnq
leveller HÄMMERLE 30/450 with the dimensions: 450 x 7 mm, 19 rolls, diam. of the rolls 30 mm
Btdhi2nuvg
band width: 80 mm
plate thickness: 1,5 mm
Bnmwkdf0
number of rolls: 5
total power requirement: 1,2 kW
weight of the machine ca.: 150 t
space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m
straightening rolls:
- 2 upper rolls, 3 lower rolls
- material feed is performed via two compressed air controlled rolls
- compressed air connection is not mounted
i.D.
STRAIGHTENER FEEDING 500 x 6 mm
Ihkf78l
complete with ELECTRONIC FEEDER + DOUBLE DECOILER
brand SARONNI
Year 1996 - CE MARKED
4-rolls plate bending machine IV2424
YOM: 1988
Manufacturer: RAZYAN
Made in: Russia
It is used for bending of cylindrical and conical shells or their elements from sheet material in a cold and hot state.
Specification:
Max. plate thickness:
-At bending: 25 mm
-At prebending: 20 mm
Max. plate width: 3150 mm
Min. bending radius: 380 mm
Bending speed: 7500 mm/min
Dl8twpqby
Upper roll diameter: no more than 500 mm
Total power: 25 kW
Main drive motor power: 37 kW
Voltage: 380 V; 50 Hz
Dimension...
Straightening machine GSW Schwabe Model: CRL 30/ 95 Year: 1996
Band width approx. 300 mm Up to 3 mm sheet thickness
Xmfwo
Sheet reel: A&B Kempen model. AHC 1500 year: 1991
Band width approx. 300 mm diameter 1500 mm
Engine power. 1.5 KW 380 volt 50 Hz
The sheet metal reel or the sheet metal straightening machine Schwabe can also be sold individually.
material width:300 mm
Y7kj8mbt0
no. of straightening rolls:13+2+2
straightening roll diameter:60 mm
leveller ARKU Typ HiCap 25850/21 - dimensions: 850 x 1,30 mm, 21 rolls, diam. of the rolls 5 mm.
It is a straightening machine from a strip line.
Bs9wkeihgf
Control cabinet and control panel not available.
material width: 400 mm
material thickness: 2 mm
Number of Straightening rolls: oben/upper/arriba: 5x
Number of Straightening rolls: unten/lower/abjo: 6x
roll width: 410 mm
throughput speed: 9-20 m/min
total power requirement: 5,5 kW
Weight approx.: 1,3 t
S8x08vk3y
space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m
description:
- upper rolls adjustable around 14mm, not driven
- lower rolls not adjustable, driven
- each 1 intake/output roll (dia 35x410mm)
equipment:
- drum intake (L:1...
Max width: 1000 mm
Number of rolls: 5
B9c8gi3w
With scissor
tension-bending, levelling, degreasing and oiling line
strip width: 850 - 1.650 mm
strip thickness: 0,2 – 1,25 mm
Jwlhuq
coil weight: max. 12 t
tension degree: 0,2 - 1,2 %
oiling: max. 100 mg/m²
material width:75 mm
total power requirement:1,5 kW
dimensions of the machine ca.:1,90 x 1,15 x 1,25 m
Lqyj8vil
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
