Exotic log band saw

Brenta

Condition: refurbished (used), LBL Brenta chipper CT 700 Max. Cutting depth = 150mm. Max. Cutting height = 650mm 9 blades Nlsdpfx Aoucp N Aobyei Free center disc, overheating protection Clearance = 800mm Fast, precise positioning thanks to servo motor

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: IRB6640-235/2.55 IRC5, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot Includes our warranty and a detailed 77-point protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB6640-235/2.55 Controller: IRC5 Payload: 235 kg Reach: 2.55 m General purpose: Heavier Payload Floor Mounted Robot mass: approx. 1400 kg Optional: We can deliver the robot with an ABB IRBT6004 track (up to 32 meters if needed). Complete with 7th axis drive unit in the robot controller, motor, cable chain, grease pump – fully functional and running. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) Nljdpfx Abep T Uz Eoysi About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: excellent (used), Year of construction: 2011, 6-axis industrial robot ABB IRB6640-235/2.55 Year of manufacture 2011 With teachpanel, IRC5 control, connection cable, robot body We have more robots in stock, mainly from KUKA and ABB Nljdpfx Abeixqhujyji

Condition: new, Year of construction: 2025, Device description The splitter has an overload valve that drains oil to the tank and an efficient, failure-free gear pump. The tree lifting system makes it easier to place heavy materials directly under the splitting wedge 5-pin power connection The wedge set at an angle makes it easier for the wedge to sink into the material. FAILURE-FREE HYDRAULIC PUMP 24l! Technical parameters Pressure force 22 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum wood length 350 mm Nodpfewnxcmox Abyjli Maximum wood length 1100 mm Splitting speed (continuously adjustable) 10.5 cm/s Return speed 7.5 cm/s Wedge stroke length 948 mm Total engine power (S1;S6) S1:5.1 kW S6: 6.6 kW Voltage 400 V Hydraulic tank capacity 24 l Hydraulic system pressure 27.7 Mpa Dimensions 1050 x 1550 x 2500 mm Weight approx. 320 kg

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy Nsdpfsqy E Rlox Abyoli TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: excellent (used), Year of construction: 2012, 6-axis industrial robot Njdpjixqn Tjfx Abyjli ABB IRB6640-205/2.75 year of construction 2012 with connection cable ,Teachpanel ,IRC5 switch cabinet and robot body We have many more industrial robots in stock.

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Nedju Uh T Djpfx Abyoli Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Year of construction: 1976, condition: excellent (used), Full frame saw / frame saw BÖGLI KHV-700 Marathon Year of manufacture: 1976 Nledpfepyglijx Abyoi 75HP, 380V, 50Hz max. passage 710 mm stroke: 500 mm with splitting wedge Marathon 2 very good condition - available immediately Location: Austria, near Feldkirch

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production Nedpfx Abehcwrkoyeli TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, Nodpfxopfaxue Abyjli PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø