Automatic Punching Press

BRUDERER BSTA 30

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm Ljdpjvuk Hrofx Afzerw material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: IRB6640-235/2.55 IRC5, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot Includes our warranty and a detailed 77-point protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB6640-235/2.55 Controller: IRC5 Payload: 235 kg Reach: 2.55 m General purpose: Heavier Payload Floor Mounted Robot mass: approx. 1400 kg Optional: Lrsdpfxjp T Uz Ee Afzjw We can deliver the robot with an ABB IRBT6004 track (up to 32 meters if needed). Complete with 7th axis drive unit in the robot controller, motor, cable chain, grease pump – fully functional and running. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: good (used), . Technical data Ljdpfx Aexu T Eyofzorw . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: used, Year of construction: 1979, machine/vehicle number: 5136, Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton Ledpfsuqd Rrox Afzsrw Standard configuration Roll feederfeeding length 20 - 100 mm Extended machine accessories Automation Roll feeder, type BBV 120/60

Condition: new, WMD45A ROGI Drill Cutter VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Lrjdpfx Aega Tyzsfzsw Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDED * 3-axis digital readout brand SINO * Automatic longitudinal feed worktable * Drill head with ISO30-B16 shank * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * LED work light * Cooling system * Tap function * Digital depth stop * Milling head motorized height adjustable * Various tools in suitcase

Year of construction: 1975, condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Lredeht Hddjpfx Afzew

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm Lrodpfx Afscxxu Njzjw table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw Ledjqy E Rlopfx Afzorw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Lrsdpfxoht Hdws Afzjw

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm Ljdpfx Aocxxrdofzorw dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm Lsdpfx Afoiwfp Tszerw - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Ljdpfx Afoht Hdhezsrw

Condition: used, Year of construction: 1971, machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm hole in the table:310 x 80 mm distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t Lrjdjcxxxmepfx Afzow dimensions of the machine ca.:1,2 x 1,16 x 2,15 m

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m Ledpfx Afod Nl E Ujzsrw distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Year of construction: 1974, condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Ledpoht Hdtefx Afzsrw