Used Automatic Punching Press for sale (45,377)

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Hu3Mw3G Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1995, Manzoni press Pressing force 5.000 kN Stroke rate 15-70 strokes/minute Stroke adjustment 0-315 mm Ram adjustment 200 mm Installation height 970 mm Table surface 3,600 x 1,300 mm Ram area 3,500 x 1,500 mm SIEMENS S7 control system Iswcqba KEMMERICH conveyor system Straightening machine strip width 100-700 mm strip thickness 0.6 - 4.0 mm Decoiler Coil weight max. 8,500 kg Strip width 100-700 mm

Year of construction: 1981, Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Dyxpfi Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 2015, pressure 30 t no. of strokes max. 2000 Hub/min sheet thickness - max. 6 mm sheet thickness - min. 0,6 mm total power requirement 8,5 kW weight of the machine ca. 9300 Kg dimensions of the machine ca. 4,9 x 3,9 x 1,9 m Working area: X= 2500mm (10000mm with repositioning) Y= 1250mm (B stations 1180mm) approx. 1000 strokes/minute at 1 mm feed and 1 mm sheet thickness approx. 2000 strokes when marking approx. 375 strokes when punching distance 20 mm incl. automatic oil drop lubrication in the tool center Force 300 kN when using a single tool Force 200 kN when using 6-way tool Installed power 8.5 kW Average consumption 4.5 kW incl. 6 B stations with active lifting of the lower tools for forming Special equipment: Electrical preparation for attaching sheet storage (Load & Unload System) Vacuum system (option no. KAP-287) Large parts flap 1200 x 900mm with parts sensor and Collection trolley (option no. KAP-350) Revolver: 3x Station D Index 3x Station D fixed 6x Station Small parts flap approx. 200 x 200 with collection container 2 clamping claws Tools included: 3x Euromac XMTE6 multi-tool for rotating or fixed D stations Adapters and reductions of the tool holders Various spare parts, also from a Euromac ZX. Since many parts are the same, they can still be used. Approx. 50 dies and 30 punches as well as strippers of various shapes suitablefor the XMTE6 multi-tool Strokes: 10,500,000 Cjeukry7Mm Operating hours switched on 19,000h Working hours 4,500h

Condition: used, Pressure: 30t Strokes per minute: 120-600 Stroke: 40mm Up table size: 250x500mm Down table size: 600x600mm & 400x320mm Between Columns Technical characteristics: *AUTOFEED LENGTH 80mm, WIDTH 320mm *AIRCLUTCH Power: 7,5kw DIMENSIONS: Height: 2600mm Width: 1800mm Length: 1200mm Weight: 3800kgr Wombnnuw New electric systems

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Dpfk72 Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: ready for operation (used), Year of construction: 1961, Functionality: fully functional, Machine/vehicle number: 109/61, Total height: 2,500 mm, Total width: 2,100 mm, Total length: 1,800 mm, Pressing force: 50 t, Table width: 450 mm, Table length: 560 mm, Overall weight: 5,000 kg, Operating pressure: 5 bar, Power: 5.5 kW (7.48 HP), Equipment: Documentation/Manual, Inclinable automatic punching press from Müller Weingarten HZ 50 to be sold immediately for reasons of space due to new acquisitions. Double-sided gripper feed Waste shears Multi-disc clutch with brake Electronic stroke counter with switch-off Vcvjd3T3 Automatic lubricant device

Condition: good (used), Year of construction: 1990, Pressing force 4,000 kN Table surface 2,280 x 1,400 mm Ram area 2,000 x 1,300 mm Stroke adjustment 30-210 mm (currently only possible manually) Installation height 500 mm Dptryh Ram adjustment 150 mm Fold-through hole in the press table 1,220 x 350 mm Stroke rate 15-120 strokes/minute Belt conveyor Max. Belt width 640 mm Max. Belt thickness 6 mm Incl. two tool changing trolleys

Condition: good (used), table size: 350x350mm E8V0Evg8K

Year of construction: 1990, Condition: used, Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic punching automatic for precision work (High-Speed-Press) - for punching, drawing, pressing coin, bending, riveting, trueing, assembling - with hydr. gripper feed Model HS und 7-Rolls-Straightener - normal bands with thickness of about 0,4 mm - 2,5 mm x ca. 160mm Breite as well as narrow ones up to 4 mm can be processed - with slide round pillar guidance - with automatic central lubrication - high-Speed: up to 400 stroke min-1 - adjustable fixed stop via motor (manually from below ) - Betriebsarten wie Dauerhub und/oder Einzelhub Equipment: - 1x hydr. aggregate - 2x switch cabinets Vvyqgrzri Condition: punching press has a control malfunction and will be sold as is! DOCUMENTATION AVAILABLE

Year of construction: 2008, Condition: excellent (used), Machine/vehicle number: 08-10-05, YOCO JY-105E Automatic punching machine with stripping station, maximum format 750mm x 1050mm, manufactured in 2008. Machine is immediately available, can be inspected in operation! YOCO PUNCHING MACHINE JY-105E -Nonstop Mabeg M3 feeder - Side and double sheet control Fzilxt0 - Centerline - Year of manufacture: 2008 - Maximum sheet format: 1050mm x 750mm - Minimum sheet size: 450 mm x 380 mm - Materials: 80g/m2, cardboard 1600g/m2, corrugated cardboard -3mm Maximum die-cutting pressure: 300t - Maximum speed: up to 7500 sheets/hour

Condition: used, Year of construction: 1985, Machine/vehicle number: 751, dimensions of the machine ca.:2,6 x 1,0 x 2,2 m pressure:40 t sheet width:150 mm stroke:8 - 70 mm number of strokes - stepless:60 - 300 min-1 ram surface:340 x 320 mm ram adjustment:70 mm table-size:550 x 580 mm Working width max.:210 mm column travel -side:250 mm hole in the table:400 x 90 mm clamping plate thickness:60 mm Sr3Qdk boring of tool-holders:Ø 40 x 80 mm groove width:30 mm flute depth:6 mm distance between columns:560 mm weight of the machine ca.:3,8 t total power requirement:7,5 kW

Condition: excellent (used), Year of construction: 2014, ARISA SERVO TRANSFER PRESS Pressing force: 8,000 kN Table surface: 4,000 x 1,610 mm ram area: 4,000 x 1,610 mm Stroke: 400 mm Installation height: 1,101 mm Ram adjustment: 200 mm Stroke rate: 0-70 rpm Year of construction: 2014 Transfer: Lifting stroke: 350 mm Feed path: 300 mm Max. Distance between the rails: 2,180 mm Cefxnwa8C Min. distance between the rails: 670 mm

Condition: good (used), Pressure: 25 t Blrc879S cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm

Condition: used, Year of construction: 1992, Machine/vehicle number: 9802, pressure:80 t no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar :43 kw weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m Pwzfl3

Condition: excellent (used), Year of construction: 1998, Fagor transfer press Pressing force 800 to Table surface 4,500 x 1,800 mm Ram area 4,500 x 1,800 mm Fixed stroke 500 mm Ram adjustment 200 mm Installation height 1,200 mm Stroke rate 10-30 rpm 2 sliding tables / front - back 3D transfer device Lifting stroke 0-(150+20) mm Feed path 300-1,200 mm Rail distance 900-1,700 mm Dptiv7 Belt width 100-1,200 mm Belt thickness 0.5 - 6.0 mm Reel load capacity 15,000 kg

Condition: used, Year of construction: 1979, Machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm Y7Lz7Zlm2 total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: excellent (used), Year of construction: 1991, TMP VORONETZ Year of construction 1991 Pressing force 5.000 tons Table size 5,400 x 2,400 mm ram area 5,000 x 2,000 mm Lifting height 750 mm ram adjustment 350 mm Installation height 1,572 to 1,222 mm Stroke rate 3 to 6 rpm Lateral passage 1,805 mm Dprde7 The machine underwent a general overhaul in 2005 and a new hydraulic clutch was installed in 2014.

Condition: used, Machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m Mte93C with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: good (used), Year of construction: 1994, Kaiser automatic punching press Pressing force: 2,000 kN Table surface: 1,430 x 900 mm ram area: 1,300 x 800 mm Stroke: 20 - 150 mm Installation height: 450 mm Ram adjustment: 100 mm Stroke rate: 20-150 rpm Year of construction: 1994 Control system SIEMENS S7 Roller feed KWV 600 max. belt width 600 mm Dpoikb

Condition: used, Machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links Mezcd stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder

Condition: excellent (used), Year of construction: 2008, MOSSINI SERVO PRESS Dpoihh Pressing force: 2,000 kN Table surface: 1,500 x 900 mm ram area: 1,400 x 750 mm Stroke: 20 - 100 mm Installation height: 455 mm Ram adjustment: 100 mm Stroke rate: 30-90 rpm Year of construction: 2008

Condition: used, Year of construction: 1971, Machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm hole in the table:310 x 80 mm distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm Y7Mrpgh2K table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1,2 x 1,16 x 2,15 m

Condition: used, Year of construction: 1995, Machine/vehicle number: 1830977, pressure:32 t no. of strokes:30 - 1100 Hub/min sheet width:0 - 120 mm table-size:760 x 580 mm feed::SANKYO V76 stroke adjustable from - to:3-50 mm distance between columns (le-ri):800 mm :200 dayligth:235 mm feed length:0 - 76,2 mm Y7Lbpy8Cj hole in the table:670 x 110 mm ram adjustment:50 mm surface area of ram:710 x 410 mm plate thickness:0 - 3 mm band speed:max. 70 m/min control:OP 15 SIEMENS SPS Feeding Angle:165 ° total power requirement:18 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,6 x 1,7 x 2,6 m precision machine in 4-column design, Sanyo V76 precision cam feeder, feed direction right to left, with Siemens CNC control OP15, noise reduction cabin, Herion press security valve, central lubrication, emergency cut-off

Condition: used, Year of construction: 1988, Machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min sheet width:180 mm stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER Y7Lrjhih8 voltage:380 V dimensions of the machine ca.:1,85 x 2,70 x 3,00 m double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control panel