Pot grinding

Brueckner FSH 1

Condition: new, Centre length ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Main spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1350 kg INCLUDES * 3-axis digital readout brand SINO * Quick-change toolholder type Multifix TOOE5 with 4 tool blocks Gijdpfx Aega Ty Eebhsp * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest HEAVY-DUTY DESIGN WITH CAST IRON BASE

Condition: ready for operation (used), Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices. Giedslbmtnepfx Abhep

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Giodpegyd S Ssfx Abhjp Rated current: 35 A Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Output: 1200Kw Giodpfxsnr Ek Uo Abhsp Burner: Weishaupt oil or gas burner on request

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical data: - max. grinding length approx. 350 mm - max. grinding width 150 mm - max. installation height with / without magnet 150 / 210 mm - grinding wheel stroke approx. 200 mm - clamping surface 300 x 160 mm - magnetic clamping plate 250 x 150 mm - grinding wheel dimension approx. 200 x 80 x 78 mm - grinding wheel speed 2800 rpm - swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever Giodpsklxwkefx Abhop - wet grinding device - drive 400 V / 1,85 kW - space requirement approx. W 850 x H 1650 x D 800 mm - weight approx. 350 kg

Condition: excellent (used), Year of construction: 2024, operating hours: 20 h, turning diameter over cross slide: 300 mm, turning length: 1,350 mm, turning diameter: 510 mm, spindle bore: 50 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 7,500 W, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, rotational speed (min.): 2,500 rpm, quill travel distance: 160 mm, quill diameter: 75 mm, quill stroke: 160 mm, swing diameter over cross slide: 300 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, workpiece weight (max.): 600 kg, turning diameter over top slide: 300 mm, overall weight: 2,700 kg, mount diameter: 40 mm, Equipment: documentation/manual, Style CNC is a company specializing in the manufacture of CNC lathes and milling machines for single-piece or small-batch production. If you operate a tool shop, prototyping center, or provide services with very fast turnaround times, Style is an excellent solution. The intuitive graphical software allows you to create a program directly on the touch screen of the machine in just a few minutes. Gijdpfjw Eum Ajx Abhsp We currently have a demo machine for sale with a limited number of dry run hours. The machine is sold with a full 12-month warranty, including commissioning and training. In Poland, Style CNC has its own dedicated service branch.

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence Giodper A Hcbjfx Abhep - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: ready for operation (used), machine/vehicle number: 4105, Grinding area: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Giodpfx Abeh Ugwvehop Drive motor: 380 V, 1.5 kW Required space: 750 x 700 x 1700 mm Weight: about 380 kg Cup wheel Ø: 180 mm

Condition: good (used), roll diameter 420 mm throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 470 kg dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: Gijdpfsxf Nahox Abhop - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp

Condition: used, functionality: fully functional, Cup Grinding Machine Manufacturer: Delta Gedpfxev Tquge Abhjip Type: LF-350 Grinding length: approx. 360 mm Grinding width: approx. 155 mm Max. grinding height: approx. 280 mm Magnetic clamping surface: 350 x 150 mm Drive power: approx. 3 kW Grinding spindle speed: approx. 2840 rpm Grinding wheel dimensions: approx. Ø 200 x 80 x 78 mm Z-feed: manual Grinding movement: manual Equipment: Magnetic table Grinding wheel Grinding wheel protection Splash guard enclosure Space required: 1200 x 1200 x 1800 mm (L x W x H) Weight: approx. 450 kg The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale. The purchased item is sold excluding any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, body, or health.