Chain excavator

CASE CX130C Kettenbagger BJ 2015

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Gusdpfjupxfhsx Anxob Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Gjdpfehwrgtsx Anxoub Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Gusdexk Tg Nspfx Anxsb Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: used, power: 125 kW (169.95 HP), color: orange, operation weight: 18,000 kg, Year of construction: 1975, Equipment: cabin, Power/Engine : 10.500 cm³ Chassis : Wheel Driver's seat : Cabin Attachments : Bucket ID: 118060 Ready to use 170 HP 6 Cylinder 18000 Kg Video link at YouTube: We always have a large selection of used vehicles in stock. You can find more of our offer under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may have been digitally processed on photos Gsdpfxjv S Nrhj Anxoub

Condition: used, mileage: 8,35,837 km, power: 309 kW (420.12 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2010, construction height: 3,850 mm, number of beds: 1, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile used truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a powerful diesel engine that delivers 309 kW (420 hp) and meets Euro 5 emissions standards. Equipped with an automatic transmission and a steerable and liftable axle, the STRALIS offers excellent maneuverability and is flexible in use. The vehicle is presented in a striking yellow metallic paint finish. With an overall height of 3,850 mm, a width of 2,550 mm and a length of 9,480 mm, it is designed for heavy load transport and has a permissible gross vehicle weight of 26,000 kg. The equipment includes two doors and two seats, air conditioning and an INTARDER braking system, which provides additional safety. The truck is approved as a truck and has a green environmental sticker (4), which allows it to be used in environmental zones. With only one previous owner and regular maintenance, the STRALIS is ready for efficient use. Steering and lifting axle Godpsr Uzgcefx Anxeub Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 960 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 1,260 mm, fuel type: diesel, mast type: triplex, construction height: 2,000 mm, power: 44 kW (59.82 HP), fork length: 1,200 mm, empty load weight: 3,600 kg, total length: 2,260 mm, drive type: Diesel, construction width: 1,540 mm, Rough terrain forklift Guedpfjw N Tppsx Anxeb Load center: 500 Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: Very good Front tires type: Pneumatic Front tires size: 15.5/55 R 18 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 60 - 80% Sideshift, 3rd valve, 4th valve, half-cab,

Condition: used, machine/vehicle number: MAN00000E01086979, Year of construction: 2022, operating hours: 670 h, lifting height: 3,700 mm, fuel type: diesel, power: 37 kW (50.31 HP), motor manufacturer: Kubota, gearing type: hydrostat, Lifting capacity: 2.500 kg Gujdetvlqmjpfx Anxjb Maximum passing height: 209 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Transport dimensions (LxWxH): 4.19x1.45x2.08 Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,596 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,647 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, fork carriage width: 1,260 mm, empty load weight: 4,530 kg, drive type: Diesel, construction width: 1,320 mm, Off-road forklift Load centre of gravity: 500 Gedpfx Aovgh Ikjnxeub ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tyres type: pneumatic Front tyres size: 275/70 r22.5 Front tyres condition: 60 - 80% Rear tyres type: pneumatic Rear tyres size: 7.00-12 Rear tyres condition: 60 - 80% Side shift, 3rd valve, front work lights, heating, soot filter, full cabin, full free lift, CE certificate,

Year of construction: 2023, condition: new, Layout: Shears Attachment suited for: Construction machines Gedpfon Tm Erox Anxeub Warranty: 12 months As an industry-leading manufacturer, we take pride in offering our high-reach demolition boom-arms designed for excavators, enhancing their capability to reach and demolish structures at towering heights. Our high-reach boom-arms deliver unmatched power and precision, making them an indispensable tool for tackling complex, large-scale demolition tasks. Constructed from robust materials and engineered with an eye for detail, our high-reach boom-arms ensure superior durability, even under substantial impacts and intense vibrations, providing operators with the confidence and control necessary for safe, effective demolition. For detailed information and get offer please contact us

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m Gedpfx Anotv Ikloxsub cube table 500 x 500 x 500 mm