Wheel loader

Caterpillar CAT 432D

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning 16,850 kg 91 kW Top condition Hnsdpfjyltr Aox Ab Iet

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) Hnodpfxergzv Ns Ab Iet * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Hnsdpfswpku Dox Ab Iet Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: new, empty load weight: 440 kg, maximum load weight: 1,560 kg, overall weight: 2,000 kg, loading space length: 4,000 mm, loading space width: 1,850 mm, tire size: 195/50r13c, *Car trailer *from *trailer manufacturer* TEMARED model CAR FLAT 4018U 2000. A tiltable *car transport trailer* suitable for small vehicles. Hnodpfx Asqv Am Ssb Ist Standard equipment of the *car transporter* is a tipping function with weight transfer, lashing eyes, loading rails, support wheel, galvanized frame and V-drawbar. For this *car trailer for car transport* you can also get accessories such as Spare wheel, tool box, car lashing straps, wheel lashing straps and an anti-theft device.

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,300 h, power: 102.97 kW (140.00 HP), motor manufacturer: Deutz, machine/vehicle number: WSXCZ20200TD10041, Equipment: air conditioning, cabin, front power take-off, TTV transmission Hnodpfeyalwtox Ab Ist Front axle and cab suspension Front linkage with PTO

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm Hjdpfjy Tbf Iex Ab Iont special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: new, functionality: fully functional, Year of construction: 2026, LOADING, UNLOADING, LOADING DOCK, ACCESS, MOBILE RAMP 15T RAMP, 2M WIDTH TM-GROUP ONE OF THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tons - Internal ramp width: 2150 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Raid Lattice: - Galvanized grid with anti-slip grooves. Reliable and safe base. The forklift and pedestrian traffic are guaranteed the best possible grip and solid support. ✅ Handle for a forklift (can be installed on both sides): - Convenient and quick attachment for a forklift allows the ramp to be transported in all directions. The specially designed handle allows you to maneuver the ramp even in confined spaces. ✅ Additional adjustable or fixed safety supports - Work safety is essential, the ramp is equipped with a support system known from truck semi-trailers. Solid legs guarantee a stable base under the transported load. ✅ Chain to connect to a truck, wagon or fixed storage ramp A solid steel chain is another advantage of our ramp, additionally the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side rails: - Safety barrier with the possibility of unscrewing and installing a frame/roof (the roof is optional) ✅ Electric control of ramp height: - The smooth electro-hydraulic drive uses a high-end 230V pump. ✅ Double sided hand pump: - Hydraulic pump for height adjustment when it is not possible to connect to the electro-hydraulic power supply - two-sided lifting. Hsdemt D Sbspfx Ab Ient ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale Hnsdpfeyz Db Ujx Ab Iot - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate

Condition: used, mileage: 2,65,300 km, power: 180 kW (244.73 HP), first registration: 07/2004, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2027, color: grey, gearing type: mechanical, emission class: euro3, loading space length: 4,000 mm, loading space width: 2,330 mm, loading space height: 90 mm, Equipment: ABS, Due to the countless phishing and spam emails, email inquiries can only be processed if you provide your valid telephone number! Unfortunately, we cannot process email inquiries without a telephone number! We ask for your understanding. For telephone inquiries and WhatsApp, please contact us regarding: * First owner * 6-cylinder engine * Hydraulic connection for a three-way tipper trailer Hnodpfx Aozt E Azjb Ist * 8-speed manual transmission with crawler gear, dual H-pattern * Meiller three-way tipper * Front axle load: 5,000 kg * Rear axle load: 9,200 kg * Gross vehicle weight: 30 t * Sideboards: 500 mm steel + 400 mm aluminum * Wheelbase: 3,200 mm * Leaf spring suspension * Rear axle differential lock * Trailer hitch * Electric windows * Heated rearview mirrors * Tires: 10R22.5 Errors and prior sale excepted.

Condition: excellent (used), functionality: fully functional, gearing type: converter, fuel type: diesel, overall weight: 19,020 kg, first registration: 01/2022, Year of construction: 2021, Equipment: air conditioning, CATERPILLAR 950GC, year 2022, 7062 hours, weight 19020 kg, 169 kW, original paint, no welding. Hnsdpfxozrhzdj Ab Iet