Cekamon EndSaw M (Trimpsaw)

CekamonSaws M

Condition: used, Year of construction: 1993, operating hours: 48,000 h, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT - replaced in 2010 Link height: 80mm / max. product height: 65mm / Net belt width: 580mm / Belt width between infeed covers; 535mm / belt stack with 24 tiers / Belt mesh: M13-1.5 / 24 tiers (possible to put more tiers) Layout N-S CCR Evaporators SS/AL / number of coils: 1 / number of fans: 2 Standard -replaced in 2011 CIP belt cleaning system Enclosure: W/W (white inside and white outside) - replaced in 2010 Chain, balls and plastic guides replaced in 2017 Hfodpfovf Iuzjx Adwob Refrigerant: ammonia / refrigeration: R717 Max total heat removal 252 kW/h ProCare service till 2018 Documentation available Stop running in 2018 Possibility of dismantling and preparation for transport for an additional fee

Year of construction: 2009, condition: ready for operation (used), Operating pressure: -1 to 32bar, operating temperature: -50 to 100°C, test pressure: 35.2bar. Hfodjq R U R Repfx Adweb

Condition: ready for operation (used), Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130. Hodehncwiopfx Adwofb

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Hfjdpovllxdofx Adwjb Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Hodpfx Adjukd Drjwjfb Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. Hfsdpjq Nfuzjfx Adwob 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: new, Year of construction: 2024, Circular saws. • For cutting wood with nail residue Hfsdpfoh Uubdsx Adweb • Available in various diameters. For more information call us.

Condition: good (used), Roller conveyors and chain conveyors Hodpod Sf Rqefx Adwjfb

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Hsdpfxswdutms Adwsfb Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Type W, Since 1993 more than 750 machines have been sold. Can be used in a repair line and as standalone machine. • CE certificated by a so called Notified Body (SKH). • Speed adjustable table top. • Pallets can be dismantled with a pushing and pulling operation. • Large wheels with a synthetic surface for longer lifetime of the band saw blade and less noise. Hodpfx Adjtucm Howofb • Two connections for saw dust exhaust system are possible. • Stable and safe galvanized parts like the saw guides. • Out of 50-75 pallets per hour the broken parts can be removed. • 20-40 pallets per hour can be dismantled. • Easy installing.