Steam generator, rapid steam generator

Certuss Junior 120

Condition: used, Year of construction: 2009, IN SUPERSILENCED 20' CTR Power (KVA): 1000 Working hours: 10500 Lrsdpfx Asxvp Efodvji

Condition: excellent (used), Year of construction: 2001, pressure: 13 bar, 1 used steam boiler ----- Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 31 m² Maximum output: 2,000 kg/h Maximum permissible operating pressure: 13.0 bar Increased test pressure: 23.4 bar Water content at NW approx.: 1,740 l Total water content approx.: 2,480 l Lrsdpfx Adswub Hbjvoi Year of manufacture: 2001 Equipped with Weishaupt gas burner, gas control line, control cabinet, feed water pump, water level sight glass, steam and safety valve, and the existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Lrjdpfx Aex Srphjdvei

Condition: used, Year of construction: 2022, fuel type: diesel, motor manufacturer: C32 (Remanufactured by Cat ), Field of application: Construction Empty weight: 9.000 kg Generator capacity: 1.250 kVA Frequency: 50 Voltage: 230 Lrodewgvp Ujpfx Advji Transport dimensions (LxWxH): 20 ft HIghcube Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm Lrsdpstv Rgrjfx Advei dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Year of construction: 2021, condition: new, Aluminium ascending conveyor belt incl. substructure rising range starting from 50mm (adjustable) discharge range 1500mm (adjustable) conveyor belt width 500mm (adjustable) Lodpjhh Dbasfx Advori We supply our conveyor belts in PVC, PU or rubber. PVC- conveyor belt incl. driver and corrugated edge Drive: Motor 0,25KW ( adjustable ), speed 0,3m/sec Connection 220/240V, 50Hz protection class IP54 drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply especially cross-stable Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply the corresponding equipment from our own production. B2hd9kmmdn Please contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: like new (used), Year of construction: 2012, operating hours: 27,000 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture 2012. Steam output 360 kg/h. Max. steam pressure 13 bar. Delivery available at additional cost. On-site inspection possible. Please contact us if you have any questions. Ljdeydqurjpfx Adveri

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Lrjdpfjvu Tt Iex Advsi Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device Lredpfx Adou Nigkovoi - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, operating hours: 35,000 h, machine/vehicle number: LC581, Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 250 ml Can end: 200 end (industry size 200) Monoblock configuration: filler–seamer integrated block for minimized DO pickup Formats & Throughput Primary can size: 250 ml Line speed: up to 14,000 cph (format- and product-dependent) Process Equipment Included Kaeser compressor package with booster and two air receivers (p.y. 2010, start 2011) CIP station, three tanks (p.y. 2011) Syrup room with cooling system (p.y. 2011) Lrodpfxoyhbpze Advsi Nagema mixer (p.y. 1992) Five ready-to-drink tanks, 100 hl each, steel with food-grade lining Beverage filter (p.y. 2011) Frezart can depalletizer (p.y. 2009, start 2011) Two can washers adapted to 250 ml (p.y. 2011) Hermis tunnel pasteurizer (p.y. 2015) Stratec can fill level inspector (p.y. 2000) Victor can printer / coder (p.y. 2020) Kisters packaging machine (p.y. 1993) Keber palletizer (p.y. 1997) Sita pallet wrapper (p.y. 2011) Complete conveyor system interconnecting all machines + two can accumulation turntables (p.y. 2011) Thermo-shrink labeling line for blank cans (p.y. 2015) Advanced Automation & Control Systems In-line quality control: Stratec can fill-level inspection for continuous monitoring and reject of out-of-spec containers Product identification: Victor industrial can printer for date/lot coding CIP capability: three-tank CIP station supports hygienic cleaning cycles for filler and product pathways Integrated conveying and accumulation: conveyors with two turntables provide smooth flow and buffer management to protect uptime Detailed electrical and controls documentation is available on request. Production Line Integration Capabilities Upstream Depalletizing of empty cans (Frezart) and transfer to washing Dual can washers adapted for 250 ml format Syrup room with cooling, beverage filtration, and mixing (Nagema) for consistent syrup preparation Compressed air supply package (Kaeser) with booster and storage Filling & Seaming Isobaric filling with 45-valve Ortmann Herbst filler ensures stable carbonation retention Ferrum 706 can seamer with 6 heads for reliable double seam integrity on 200 ends Downstream Hermis tunnel pa...