➤ Used Cnc Portal Milling Machine for sale 🏷️ on Machineseeker India ⚙️✔️

Listing

Geldern

(dealership location)

7,046 km

CNC portal milling machine / CNC Router

CNC-STEP CNC Portalfräse T-Rex N-0609

€10,240

Fixed price plus VAT

Call

Condition: new, With the T-Rex N-0609 portal milling machines you buy mature technology and long-proven technology combined in one portal machine Machine with CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table. Due to the robust steel frame construction, vibrations can be damped during the machining process. Thus, the machined workpiece gets clean cutting edges and surfaces. The CNC portal milling machine with helical racks and HWIN / THK / PMI linear slides has a solid cast steel frame. The portal milling machine enjoys great popularity with its robust construction and high stability. Due to the compact base, the machine is ready for use directly at waist height, eliminating the cost of a base as an additional purchased element. Further advantages of the T-Rex portal milling machine Compared to the CNC milling machine from the High-Z T series, the T-Rex portal milling machine has a 100mm greater clearance height between the grooved plate and the Z axis. In this case, the plate material can also be a little thicker in order to still fit under the bridge. This means that you are buying a machine that is unparalleled in its price class, with outstanding precision combined with high stability, maximum ease of operation and an attractive appearance. Travel X-axis 900 mm Y-axis travel 600 mm Z-axis travel 200 mm Passage height 200 mm (optional 300/400mm) Clamping surface X / Y on grooved plate 930 x 630 mm length x width x height 165 x 144 x 195 cm Weight 650 kg backlash +/- 0,015 Repeatability ± 10 ?m feed speed 17.000 mm/min Iteunet Working speed max. 12.000 mm/min

more

Listing

CNC-STEP CNC Fräsmaschine T-Rex Servo-0609

Geldern

(dealership location)

7,046 km

CNC portal milling machine 900x600

CNC-STEP CNC Fräsmaschine T-Rex Servo-0609

€13,230

Fixed price plus VAT

Call

Condition: new, With the servo motor milling machine T-Rex Servo-0609 you buy mature technology and long-proven technique combined with trend-setting servo motor technology. Machine with control panel incl. control system, multi-zone vacuum table, manual central lubrication, CADCAM software, control software Machine dimensions 1650 x 1440 x 2050 mm traversing range 900 x 600 x 200 mm clamping area 930 x 630 mm Passage height Z 220 mm (optional 320 / 420 mm) Weight approx. 700 kg Backlash approx. 0.02 to 0.03 mm Repeat accuracy approx. 0.01 mm Rapid speed diagonal max. 50,000 mm per min. Working speed diagonal max. 35.000 mm per min Drive type Servo motors Yaskawa 400 Watt Linear guides width 20 mm (optional 25 mm) The servo motor CNC milling machine T-Rex Servo-0609 with helical racks and HWIN / THK / PMI linear slides has a solid steel frame. The portal milling machine enjoys great popularity with its robust construction, high stability and extensive basic equipment. Due to the robust steel frame construction, vibrations can be damped during the machining process. Thus, the machined workpiece receives clean cutting edges and surfaces. Further advantages of the servo motor milling machine T-Rex Due to the installed servo motors, high efficiency is brought into the production. Besides, there is a high time-saving in clamping, machining and maintenance. A 200mm high clearance between the vacuum table and the Z-axis also makes it easy to machine taller panel materials, as they fit under the bridge without effort. Versatile applications T-Rex Servo-0609 servo motor milling machine is not only suitable for precise milling work but can also be used for drilling, cutting or engraving. Massive components and the high quality of processing of mechanical components allow the production of workpieces from various materials! Due to the built-in helical racks, the T-Rex servo-mills achieve fantastic accuracy and immense speed and are also very flexible in special sizes and can also be manufactured to customer specifications. Lyk2j CE-compliant commissioning of our CNC milling machines requires the installation of a protective enclosure and exhaust port.

more

Listing

Halberstadt

6,724 km

CNC - Portal milling machine

KOLB KLUEPPELBERG Cubimat YC 2000

Call

Condition: used, Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Biobapetnz7 Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Max. Workpiece Weight: ca. 18 t X-Travel: 3.650 mm Y-Travel: 3.500 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Table-Size (Lxw): 2.800 x 2.000 mm Tool Taper: SK 50 Distance Between Columns: 3.200 x 3.600 mm Machine number: 016453-20.1 item number: 010000081967 Further information: 4 Milling Heads available.

more

Listing

Eichenzell

6,806 km

Portal CNC-Milling Machine

isel Germany OverHead

Call

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area B7e7di2z7r -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

more

Listing

Celle

6,795 km

CNC Portal Milling Machine - 5-Axis

TOS KUŘIM FRFQ 250 VR/A12

Call

Condition: excellent (used), Year of construction: 2013, CNC 5-Axis Gantry Type Milling Machine Tos Kurim FRFQ 250 VR/A12 Year 2013 Heidenhain iTNC 530 Table size 14000 x 2500 mm Distance between columns 3000 mm Travels: Gpemcsbq X 12000 mm Y 3300 mm Z 1500 mm Feeds X,Y,Z 5000 mm/min. Rapids X,Y 15000 mm/min. – Z 12000 mm/min. Spindle drive 30 KW Spindle speeds max. 5000 rpm Tool taper ISO 50 40 station tool magazine V0/V 2-Axis NC-Universal milling head B-Axis 210° C-Axis 360° VP4 Vertical Milling head Machine can be inspected under power Proposal Number V(F)-6851

more

Listing

Tuřanka, 627 00 Brno-Slatina, Tschechien

6,298 km

Portal milling machine

Fermat GMB 2560 CNC

Call

Condition: refurbished (used), Year of construction: 2023, Portal milling machine GMB 2560 CNC Hersteller: Fermat overhauled: 2023 Control Heidenhain ... TNC 640 Table dimensions... 6000 x 2500mm Axis X ... 6000mm Distance between stands... 3200mm Passage between the table and the crossbar... 1900mm ISO 50 Spindle speed ... 40-5500/min. Max. table load... 22000kg Bfznql3l3sk Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power... 41kW Rapid traverse... 10m/min Total power requirement...83kVA Average of the sanding piece... 500x450mm The machine is in good condition and can be tested under power.

more

Listing

Barlinek

6,456 km

portal milling machine

FB 200 CNC

Call

Condition: excellent (used), Year of construction: 2000, CNC 5 axes portal milling machine FB 200 - Simens Sinumeric 840d Control SIMENS - SINUMERIC 840d + SIMODRIVE 611d Spindle 5 axes: 3 axes XYZ and indexation in 360o every 5o Table load capacity: 10 tons Table dimensions: length / width: 4000/2000 mm Space between columns: 2840 mm Max. Distance of the spindle from the table: 1050 mm Nominal travels: x / y / z /: 5000/3100/1025 mm Spindle: ISO 50 Max torque: 3060 Nm / 62,5 rpm Szk0l 823 Nm / 230 rpm 95 Nm / 2000 rpm Spindle rpm: Range 1: 5-230 rpm Range 2: 230 - 2000 rpm Positioning Accuracy: X / Y axis -1000mm - ± 0.006 Z axis - 1000 mm - ± 0.010 Weight: 60 tons Year of production 2001 Producer DTI Poland The machine is very good available with all equipment; tools, angle bases for the table and tool cabinets

more

Listing

Schildbach 230, 8230, Österreich

6,330 km

CNC portal milling machine

XYZ MACHINERY GMBH ATC V-2030

€35,000

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2022, The machine has a generous work surface with a milling area of approx. 2x3 m and a vacuum table with 8 zones that offers you sufficient space for versatile machining in different materials such as metal, wood or plastic. Thanks to axes with servo motor drive, automatic tool changer with 10 tool places & tool holders, you will achieve first-class results in the shortest possible time. OPTION: Extraction unit AL-KO Power Unit 120/400V (BJ 2021) Dv8yjy8z Tested clean air dust extractor in self-supporting sheet metal construction for universal use with a wide range of materials such as wood and wood composites, paper, plastics, metal, stones and much more. Surcharge PC & Screen: € 990,00 Surcharge for AL-KO APU 120/400V extraction unit: € 2,990.00

more

Auction

CNC portal milling machine

KOLB KLUEPPELBERG Cubimat YC 2000

Condition: good (used), Year of construction: 2012, machine/vehicle number: 016453-20.1, Functionality: fully functional, TECHNICAL DETAILS workpiece weight: max. approx. 18 t Gw8l7jm X-way: 3.650 mm Y-way: 3.500 mm Z-travel: 4000 mm W-way: 2.000 mm speed: 4.000 rpm Torque: max. 2.100 Nm table size: 2.800 x 2.000 mm tool holder: SK 50 Passage between the uprights: 3,200 x 3,600 mm EQUIPMENT 4 milling heads Available

more

Listing

Werlte

6,959 km

5 axes CNC portal milling machine

Zimmermann FZ37

Call

Condition: excellent (used), Year of construction: 2008, Year of manufacture 2007 / installed 2008 Control : Siemens 840 D Availability : ex stock Sweden immediately Condition : very good, like new Power on hours : 9752 h Spindle hours : 1784 h Last service on machine : October 2021 Backup + buffer batteries new March / 2022 ATTENTION : Machine was only used as backup Working ranges X-axis 4500 mm Y-axis 3000 mm Z-axis 1500 mm Clamping table: dimension : 5500 x 3000 x 350 mm max. table load : 30000 kg/sqm distance T-slots 250 mm milling spindle: max. speed milling spindle : 24000 rpm max power : 52 kW max torque : 45 Nm C axis : +/- 275 degree swivel head A- axis : +/- 110 degree Feed rate : 30 m/min X-, Y-, Feed rate : 20 m/min Z-axis 5-axis milling head VH 5 with A- and C-axis Water cooling for milling head VH5 tool holder : HSK 63 A tool magazine : 80 positions machine weight : 65.000 kg machine dimension : 7500 x 5000 x 4750 mm Power requirement : 155 kW 315 A other features - Renishaw MP 60 - glass scales Heidenhain in all axes with sealing air - 2 x scraper belt chip conveyor make KÜMA KF1/260 WB - Laser measuring Blum "Micro " up to max. tool diameter 80 mm - Coolant high pressure unit Knoll type 400 K -3 with belt filter - Slimline operating handwheel - Inner + outer coolant supply - High pressure IKZ - minimal quantity lubrication system bird inside + outside - complete documentation Ewew3z9 - Coolant cooling system Stulz - Air filter systems Absolent - complete machine enclosure machine is dismantled since February 2023 in warehouse Hultfred / Sweden All information without guarantee, errors and prior sale we reserve expressly Sale only to trade

more

Listing

Celle

6,795 km

5-Axis CNC Portal Milling Machine

Tos Kurim FRP-300

Call

Condition: excellent (used), Year of construction: 2009, 5-Axis CNC Portal Milling Machine. Tos Kurim FRP-300. Year of manufacture 2009. Siemens 840D SL CNC control. Distance between the columns 3900 mm. Spindle to table max. 2770 mm. Table size 10000 x 3000 mm. Working travels: Table longitudinal travel X 11500 mm. Spindle cross travel Y 4800 mm. Milling ram vertical travel Z 1500 mm. Cross rail vertical travel W 1250 mm. B9hvpeeoka Spindle taper ISO 60. Spindle drive motor 71/88 KW. Spindle speeds 20 - 2500 rpm. 2-Axis NC Rotary-Swivelling milling head. Right angle milling head. Good condition. Under power. Huge savings ! Proposal Number V(F)-6657

more

Listing

Isernhagen

6,811 km

CNC Portal milling machine

F3112 PRO

€20,000

FCA Fixed price plus VAT

Call

Condition: as good as new (ex-display), Year of construction: 2022, Working area 3100 x 2100 mm Spindle speed 0 - 18000 rpm Drive power HQD 4.5 kW Collet type ER 20 Longitudinal travel (x) 3100 mm Travel transverse (y) 2100 mm Travel (z) 250 mm Cgeoptjr Rapid traverse in X,Y,Z 25 m/min Working speed min - max. 0 - 20 m/min Control Masso N3 Weight 1,750.00 kg Dimensions 3600 x 2700 x 1700 mm

more

Listing

Barlinek

6,456 km

portal milling machine

DTI FB 200 CNC

Call

Condition: excellent (used), Year of construction: 2000, DTI FB 200 CNC portal milling machine Producer DTI Racibórz Year of production 2001 Control SIMENS - SINUMERIC 840d + SIMODRIVE 611d Qymfz 3 axes + spindle rotation 360o every 5o Table load capacity: 10 tons Table dimensions: length / width: 4000/2000 mm Space between columns: 2840 mm Max. Distance of the spindle from the table: 1050 mm Nominal travels: x / y / z /: 5000/3100/1025 mm Spindle: ISO 50 Spindle drive power: 21.5 kW Max torque: 3060 Nm / 62,5 rpm 823 Nm / 230 rpm 95 Nm / 2000 rpm Spindle rpm: Range 1: 5-230 rpm Range 2: 230 - 2000 rpm Positioning Accuracy: X / Y axis -1000mm - ± 0.006 Z axis - 1000 mm - ± 0.010 Weight: 60 tons

more

Listing

Neuss

7,021 km

CNC portal milling machine XYZCAM V-1530 PRO

XYZ Machinery GmbH V-1530 PRO

€47,450

EXW Fixed price plus VAT

Call

Condition: new, Year of construction: 2023, XYZCAM 3-axis portal milling machine with 10-fold tool changer scope of application simple applications in wood, plastics, etc. Model: V-1530 Table size [mm]: 1550 x 3050 Working area X and Y axis [mm]:1524 x 3048 Working area Z-axis [mm]: 250 8tchmq7g Vacuum zones [pcs]: 6 equipment Steel construction simple frame construction with reinforced portal frame Control cabinet and control integrated in the machine bed to reduce the footprint Working table material: rigid PVC Functions T-slot and vacuum (vacuum pump 7.5 kW integrated in the machine bed) divided into 6 sections Traversing system X and Y axis rack and pinion drive Traversing system Z-axis ball screw (TBI) Linear guides on X,Y and Z axis PMI Traversing motors servo X, Y and Z axis (Delta 1.0 kW) Spindle 46.5 kW air-cooled (Hiteco Italy) max. travel speed 50 m/min max. working speed m/min Working accuracy < 0.2 mm Repeatability 0.03mm to 300mm Workpiece positioning optional Tool length sensor yes Eding CNC 760 control Vectric CUT2D software Electrical connection Electrical connection 3 phases 400 V, 50 Hz Ambient temperature 0°C -45°C

more

Listing

Neuss

7,021 km

CNC portal milling machine XYZCAM V-1530 S ATC

XYZ Machinery GmbH V-1530 S ATC

€37,780

FCA Fixed price plus VAT

Call

Condition: new, Year of construction: 2023, Operating hours: 0 h, machine/vehicle number: 0122102615301906, XYZCAM 3-axis portal milling machine with 10-fold tool changer scope of application simple applications in wood, plastics, aluminium Model: V-1530 Table size [mm]: 1550 x 3050 Working area X and Y axis [mm]:1524 x 3048 Working area Z-axis [mm]: 250 Vacuum zones [pcs]: 6 equipment Steel construction simple frame construction with reinforced portal frame Control cabinet and control integrated in the machine bed to reduce the footprint Working table material: rigid PVC Iukqftfeq Functions T-slot and vacuum (vacuum pump 7.5 kW integrated in the machine bed) divided into 6 sections Traversing system X and Y axis rack and pinion drive Traversing system Z-axis ball screw (TBI) Linear guides on X,Y and Z axis PMI Traversing motors servo X, Y and Z axis (Delta) Spindle 4.5 kW air-cooled (Hiteco Italy) max. travel speed 50 m/min max. working speed m/min Working accuracy < 0.2 mm Repeatability 0.03mm to 300mm Workpiece positioning optional Tool length sensor yes Eding CNC 760 control Vectric CUT2D software Electrical connection Electrical connection 3 phases 400 V, 50 Hz Ambient temperature 0°C -45°C Leasing without a deposit from €399.00 possible through our financing partner. Visit us at XYZCAM.de

more

Listing

CNC Bridge Milling Machine Nicolas Correa FPM-60

Manlleu, Barcelona, España

7,425 km

CNC Bridge milling machine

CNC Bridge Milling Machine Nicolas Correa FPM-60

Call

Condition: good (used), Year of construction: 1992, double head bridge milling machine correa fpm 60 (gantry milling machine) characteristics brand nicolas correa model fpm-60 working dimensions useful area 9000 x 2000 mm distance between uprights 3000 mm number and width of t-slots 8 x 28 x h12 mm distance between slots 250 mm automatic slide travel x axis travel (longitudinal) 9000 mm z axis travel (vertical) 5000 mm y axis travel (transversal) 1000 mm w axis travel (quill) 200 mm a axis travel (head rotation) +90º / - 100º travel axis c +/-200º frontal chuck with shank with head 4th and 5th axes cone type iso 50 iso 50 power 42 kw 15 kw number of ranges 2 2 rotation speed *a part constant from *a constant power from 20-2000 rpm (3200 nm) 20-125 rpm (42kw) 125-2000 rpm 25-4000 rpm (573nm) 25-250 rpm (15kw) 250-4000 rpm working feeds (x-y-z-/w shank) 2 to 6000 / 5000 mm /min rapid: (x, y, z) 8000 mm/min rapid: w (quill) 5000 mm/min axes: a and c (headstock) 1125º/min torque feed motors: (x/y/z axes) 37 nm torque feed motors: w axis (shank) 14 nm torque feed motors: a and c axes (head) 18 nm Irmfijhd8

more

Listing

Italie

6,576 km

milling machine

PARPAS CNC BRAVE 6000 x 1200 x 2100

Call

feed length X-axis: 6,000 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 2,100 mm, Condition: good (used), Year of construction: 2007, Functionality: unexamined, 2007 PARPAS BRAVE MOBILE MOUNT MILLING MACHINE cnc selca 4060 D + RCTP STATICO + VOLANTINO SELBO X2 X 6000 Y 1200 Z 2100 FAST on all axes 30m/min automatic head with continuous positioning spindle center coolant ISO 50 - 6000 rpm - 30kw head cooler without tool magazine chip conveyor. Onwermnzm

more

Listing

Beinwil am See

6,915 km

Tool room milling machine

CNC Fräsmaschine VMC 650

€69,000

ONO plus VAT

Call

travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, spindle speed (min.): 10,000 rpm, Condition: as good as new (ex-display), Year of construction: 2023, Operating hours: 100 h, machine/vehicle number: 20230519, For sale is a new CNC milling machine 4 axes in perfect condition. Key data about the machine: - Year 2023 - Travel X,Y,Z: 650x400x500 mm - Table size: 800x400 mm - Siemens control - 24-fold tool changer - 4th axis - Tool probe B2nhg98hii - 3D probe - Spindle BT40 10000rmp - Spindle oil cooler The machine is available for viewing in the Swiss canton of Aargau. You are welcome to make an appointment.

more

Listing

Doulton Rd, United Kingdom

7,615 km

CNC Bed milling Machine

XYZ Machine Tools SMX 3500

Call

Condition: like new (used), Year of construction: 2013, XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm BT40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm. Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2013 Jet Machinery Stock Number: #78678 Bcvjrayrnx2 Machine Serial Number: 11873 £24,950.00 + VAT

more

Listing

Geldern

(dealership location)

7,046 km

3D CNC MILLING MACHINE

CNC-STEP High-Z S-400/T

€2,979

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine With the purchase of the T-variation of High-Z cnc-router you get a proven technology. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Zjhpdyxl Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-engraving-machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 2000 steps/rev (1/10 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,00625 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 730 x 400 mm •Traverse Paths: X=400 mm; Y=280 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price 1902.81 EUR) •Modular frame for universal application •Weight appr. 31 kg •Complete machine Included 5 driver microstep controller 5 x 3,5 Amps (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Amper

more

Listing

Geldern

(dealership location)

7,046 km

WOOD CNC ROUTER 3D MILLING MACHINE

CNC-STEP High-Z S-1000/T

€3,909

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Zjhraz2n A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. All cnc-routers / cnc-milling-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: • Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) • 2 motors for constant tension and compression during milling operation on X-Axis • Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface • Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle • Ball bearings at both sides of ball screws on X and Y axis • Traverse speed of rapid feed: max. 7000 mm/min • Technical resolution : 0,00625 mm ( 1/8 Schritt ) • Reversal error max.: +/- 10µm ( 0,01mm ) • Table size / clamping area: 1300 x 700 mm • Traverse Paths: X=1000 mm; Y=580 mm; Z= 110 mm • Reference- and limit switch on all axes • Double safety emergency stop button • Energy chain for clean cabling • Total dinemsions incl motors: L x W x H = appr. 1320 x 840 x 500mm • Milling Motor anchorage: Euroneck Ø43mm • incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) • incl. Software ConstruCAM-3D limited( recommended sell price full version 1902.81 EUR) • Modular frame for universal application • Weight appr. 51 kg • Complete machine Included 5 driver microstep controller 5 x 3,5 Ampere (Zero3) • An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. • An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Ampere • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. • 4 Connections for 4 brushless Motor / Stepper motor • Connection with parallel port and Software WIN

more

Listing

Geldern

(dealership location)

7,046 km

3D-CNC ROUTER MILLING MACHINE Fresatrice

CNC-STEP High-Z S-720

€2,479

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs…..you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. Basic equipment of all High-Z CNC-milling and engraving machines / routers: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead Bzbfv •Traverse speed of rapid feed: max. 2500 mm/min •Technical resolution: 0,00187 mm ( 1/8 Schritt ) •Reversal error max.: +/- 30µm ( 0,03mm ) •Table size / clamping area: 1050 x 520 mm •Traverse Paths: X=720 mm; Y=420 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 1070 x 690 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price full version 1902.81 EUR) •Modular frame for universal application •Weight appr. 41 kg •Complete machine Included 5 driver microstep controller 5x 3,5 Ampere (Zero3) •An approx. 30-minute long introduction during pick up and an unlimted telephone support are included. •An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too. ----- Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine: • 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology • Main voltage 115 - 240 Volt / 47 - 63 Hz. • Motor current 4 x 3,5 Ampere • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev. • 4 Connections for 4 brushless Motor / Stepper motor • Connection with parallel port and Software WIN PCNC Light, Economy or USB with WIN PCNC USB or Profi version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX

more

Listing

Geldern

(dealership location)

7,046 km

3D-CNC ROUTER MILLING MACHINE FRESATRICE

CNC-STEP High-Z S-1400/T

€5,509

Fixed price plus VAT

Call

Condition: new, Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you’re able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter. This 3D-cnc-milling machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines. With the S-1400 cnc-routers you are able to mill in almost all materials. Additional linear rail ways from HIWIN at X-axis are making the machine extreme stable. With the two trapezium nuts at X and y axis you are able to adjust backlash too. High quality components and a optional underframe leave none wishes open. So you are able to do that too: Milling in a big metall sheet cabinet. Work further like a professional and arrange a demonstration today in our house. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller. Basic equipment of all High-Z CNC-milling machines: Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !! To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !! Zjhr9kno ----- Equipment / Productdetails: •Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step) •2 motors for constant tension and compression during milling operation on X-Axis •Guide ways X 22mm and Y axle 30 mm / Z Axis 16mm, grinded and with 61hrc hardened surface •Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle •Additional linear guide rails 15mm from HIWIN for the X Axis •Ball bearings at both sides of ball screws on X and Y axis •Traverse speed of rapid feed: max. 7000 mm/min •Technical resolution : 0,0079375 mm ( 1/8 Schritt ) •Reversal error max.: +/- 10µm ( 0,01mm ) •Table size / clamping area: 1730 x 880 mm •Traverse Paths: X=1400 mm; Y=780 mm; Z= 110 mm •Reference- and limit switch on all axes •Double safety emergency stop button •Energy chain for clean cabling •Total dinemsions incl motors: L x W x H = appr. 1750 x 1040 x 500mm •Milling Motor anchorage: Euroneck Ø43mm •incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional) •incl. Software ConstruCAM-3D limited ( recommended sell price full version 1902.81 EUR) •Modular frame for universal application ( shown underframe optional, 980 Euro incl VAT ) •Weight app

more

Listing

CNC-STEP CNC Fräsmaschine T-Rex Servo-1325

Geldern

(dealership location)

7,046 km

WOOD CNC ROUTER 3D MILLING MACHINE

CNC-STEP CNC Fräsmaschine T-Rex Servo-1325

€25,620

Fixed price plus VAT

Call

Condition: new, The servo CNC milling machine T-Rex Servo-1325 with helical racks and HWIN / THK / PMI linear slide has a solid steel frame. The portal milling machine enjoys great popularity with its robust construction, high stability and extensive basic equipment. Machine including CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table. traverse area 2500x1300x200 mm clamping area 2530x1320 mm passage height Z max. 220 mm (optional 320/420 mm) Machine dimensions 3270x2150x2100 mm machine weight 1600 kg max. rapid traverse diagonal 50.000 mm per min. max. working speed diagonal 35.000 mm per min. drive: Yaskawa 750 Watt servo motors ( optional available with 850 Watt) A 200 mm clearance height between the vacuum table and the Z-axis also makes it easy to process higher panel materials, as they fit under the bridge without difficulty. Solid components and the high quality of workmanship of the mechanical components allow the production of workpieces from various materials! With the built-in helical racks, the T-Rex servo-mills achieve fantastic accuracy and immense speed, and are also very flexible when it comes to special sizes, and can also be made to customer specifications. CE-compliant commissioning of our CNC milling machines requires the installation of a protective enclosure and exhaust port. Datdyqaqc

more

Listing

Ennepetal

6,975 km

Universal Milling Machine

MAHO MH 700 C (CNC)

Call

Condition: used, Year of construction: 1989, x-travel 0700 mm y-travel 450 mm z-travel 500 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 8 kW milling head -swivable +/- 90 ° total power requirement 23 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 3,0x2,5x2,0 m Calg20cz8p CNC milling machine with 432 Control and universal table.

more

Listing

Lüdenscheid

6,953 km

milling machine CNC

MACMON M 434 NC/CNC

€23,900

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 1999, - control: Heidenhain TNC 310 - table size: 320 x 250 mm - travel range: X= 400, Y= 250, Z= 400 mm - tool holder: ISO 40 dimensions LxWxH: 1600 x 1500 x 1900 mm weight: ca. 1200 kg Bjjumyoc

more

Listing

Brașov

5,573 km

CNC Travelling column milling machine

ANAYAK HVM 5000

Call

Condition: used, Year of construction: 2005, CNC Travelling column milling machine - ANAYAK HVM 5000. Travels on axes X - Y - Z: 4300x1200x1500mm; Table size: 5000mm x 1200mm; Table load: 6,000 kgs; Spindle Motor: 30kW; Bhm9gqh9 ISO50 Spindle Taper. The machine is ready for delivery.

more

Listing

Wien

6,310 km

Table Type Boring and Milling Machine

TOS WHN 13 CNC

Call

Condition: used, Year of construction: 1991, spindle diameter 130 mm x-travel 3500 mm y-travel 2000 mm z-axis 1250 mm w-axis 800 mm b-axis 360 ° output 85 KVA table-size 1800x1800 mm table load 12 t spindle taper ISO 50 table rotation 360x0,0001 ° spindle motor 37 kW spindle turning speed range 1500 U/min feed range 4-8000 mm/min electrics - voltage/frequency 400 / 50 V/Hz weight of the machine ca. 35 t dimensions of the machine ca. 7x7x6 m Binyuicm097

more

Listing

Halberstadt

6,724 km

CNC Travelling column milling machine 5-axis

FPT Industrie Spirit

Call

Condition: used, Year of construction: 2012, Ref. -No.: 10350 Manufacturer: FPT Type: Spirit Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg Crvyurg2b swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

more

Listing

Hessisch Lichtenau

6,811 km

CNC milling machine with Heidenhain TNC 128

DECKEL FP 3 A

€22,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 2020, CNC milling machine DECKEL type FP 3 A serial no. 2206 - 0583 year of construction 1981 Modernization with new HEIDENHAIN TNC 128 control in 2020 Travel paths X: 490 mm, Y: 290 mm, Z: 320 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm. 21 steps Feed speed 5 - 500 mm/min. infinitely variable Rapid traverse speed 1500 mm/min. Motor power spindle drive 2 / 4 kW pole-changing Mains connection 380 Volt, 50 Hz - CNC line control Heidenhain TNC 128 - Mechanical handwheels for all three axes - Vertical milling head 200 mm manually adjustable on headstock - Universal swivel-tilting rotary table - Hydro-mechanical tool clamping - Coolant device in the machine base - Control cabinet adjacent (L x W x H 600 x 450 x 1050 mm) - Operating hours since control system conversion: - Control system on = 640 hrs. - Machine on = 225 hrs. - Program run = 15 hrs. - Operating instructions, electrical diagram, manual for the control unit available Dq88dyvh9 Space requirement L x W x H 2000 x 1800 x 1950 mm Weight 1.7 tons. Very good condition

more

Listing

Heršpická 813/5, 639 00 Brno-střed-Štýřice, Czechia

6,304 km

bed type milling machine 5 axes

Zayer ZAYER 20 KF 3000 CNC

Call

Condition: good (used), Year of construction: 2001, 5-axe machine, control Heidenhain 426. Tabnle 3000 x 1000 mm Axes 2702 mm x 1200 mm x 1500 mm Cb9oyok Spindle ISO 50 Main motor output 28 kW max table loading 10000 kg Machine weight 24500 kg

more

Listing

Deutschland

6,760 km

Milling Machine - Vertical

FEHLMANN Picomax 100 CNC 2

Call

Condition: used, Year of construction: 1990, x-travel:850 mm y-travel:435 mm z-travel:580 mm control:Heidenhain TNC 155 turning speed range:50 - 7000 1/min table::1570 x 500 mm F88y3bi9z9 total power requirement:14,3 kVA weight of the machine ca.:3,2 t dimensions of the machine ca.:2,35 x 2 x 2,3 m quill stroke vertical:210 mm Vertical coordinate milling and drilling machine in good condition. The cabinet with accessories comes with the machine.

more

Listing

Wijchen

(dealership location)

7,087 km

CNC milling machine metal mill Leadwell VMC-40

Leadwell VMC-40

Call

Condition: used, Year of construction: 1997, Milling machine, VMC 8juwgxy3ac Model: CNC Manufacturer:&nbsp Leadwell Type:&nbsp VMC-40 Year of manufacturing: 1997 Control:&nbsp Mitsubishi Travel:&nbsp 1020x510x510mm Spindle-speed: 8000&nbsp rpm Table-dimensions: 1200x500mm Spindle-take:&nbsp ISO40 Machine is tested (with video). Tooling included, machine-vices not.

more

Listing

A - Niederösterreich

6,349 km

CNC tool milling machine

EMCO Emco VMC 300

€15,999

EXW ONO plus VAT

Call

Condition: used, Year of construction: 1995, control: Sinumerik 810Mspindle rotation speed: 5000 U/minturret: 12 - Fachtable clamping area: Länge 850 mm, Breite 325 mm Oii0z8z

more

Listing

Halberstadt

6,724 km

CNC travelling column milling machine 5-axis

FPT Industrie Area EVO 2

Call

Condition: used, Year of construction: 2008, Ref. -No.: 10347 Manufacturer: FPT Type: Area EVO 2 Year of construction: 2008 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt - Germany Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information: Fzglgc8 3D M Sensor MAS probe CNC controlled angle head: micro

more

Listing

Hessisch Lichtenau

6,811 km

CNC bed type milling machine

AUERBACH FBE 1200

€15,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 1996, CNC bed type milling machine AUERBACH type FBE 1200 CNC path control Heidenhain TNC 407 A make no. 074 year of construction 1996 travel X: 1200 mm, Y: 600 mm, Z: 600 mm table size 1300 x 600 mm table load 2 ton. Cfrxlwb spindle support ISO 50 distance spindle nose - table 58 - 658 mm spindle speed 30-3500 rpm. infinitely variable feed rate 1 to 6000 mm/min. rapid traverse 10 m/min. spindle drive 22 kW spindle torque max. 600 Nm Mains connection 400 Volt, 50 Hz, 50 Amp. - CNC contouring control TNC 407 A - electronic handwheel - direct length measuring system - protective cabin with sliding door - vertical head manually tiltable in two planes - hydromechanical tool clamping - coolant unit adjacent - swiveling control panel - operating instructions Space requirement L x W x H 3900 x 2400 x 2300 mm weight 6,5 ton. good condition Bed way guide of X and Z axis in a very good condition. Bed way guide of Y-axis worn, in need of repair.

more

Listing

Miloševac

5,899 km

FEHLMANN CNC Milling Machine

FEHLMANN PICOMAX 60 CNC

Call

Condition: excellent (used), Year of construction: 1999, FEHLMANN CNC Milling Machine Type:PICOMAX 60 CNC Year:1999 Control:HEIDENHAIN TNC426 XYZ Travel:500x350x610mm Table size:920x380mm Table load:300kg Spindle taper:SK30 Toolchanger:32atc Machine size-LWH:2000x1700x2575mm Machine weight:3200kg Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details! Mmxzeqf

more

Listing

Herscheid

6,948 km

Portal milling machine

Filter results

Sell cnc portal milling machine now

from €2.99*

Inform now +44 20 806 810 84

Used Cnc portal milling machine for sale (85,251)

Sort results

CNC-STEP CNC Portalfräse T-Rex N-0609

CNC-STEP CNC Fräsmaschine T-Rex Servo-0609

KOLB KLUEPPELBERG Cubimat YC 2000

Advertise now from €2.99* 10 million buyers are waiting for you

isel Germany OverHead

TOS KUŘIM FRFQ 250 VR/A12

Fermat GMB 2560 CNC

FB 200 CNC

XYZ MACHINERY GMBH ATC V-2030

KOLB KLUEPPELBERG Cubimat YC 2000

Zimmermann FZ37

Tos Kurim FRP-300

F3112 PRO

DTI FB 200 CNC

XYZ Machinery GmbH V-1530 PRO

XYZ Machinery GmbH V-1530 S ATC

CNC Bridge Milling Machine Nicolas Correa FPM-60

PARPAS CNC BRAVE 6000 x 1200 x 2100

CNC Fräsmaschine VMC 650

XYZ Machine Tools SMX 3500

CNC-STEP High-Z S-400/T

CNC-STEP High-Z S-1000/T

CNC-STEP High-Z S-720

CNC-STEP High-Z S-1400/T

CNC-STEP CNC Fräsmaschine T-Rex Servo-1325

Trust Seal

MAHO MH 700 C (CNC)

MACMON M 434 NC/CNC

ANAYAK HVM 5000

TOS WHN 13 CNC

FPT Industrie Spirit

DECKEL FP 3 A

Zayer ZAYER 20 KF 3000 CNC

FEHLMANN Picomax 100 CNC 2

Leadwell VMC-40

EMCO Emco VMC 300

FPT Industrie Area EVO 2

AUERBACH FBE 1200

FEHLMANN PICOMAX 60 CNC

Soraluce PMG

Inform now
+44 20 806 810 84

Advertise now from €2.99*
10 million buyers are waiting for you