Round vibrator

CETEMA Spiratron TM 500A

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Bedpfjqakbrex Ak Hjlg Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Bljdpfx Ajpugwijk Hjg The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm Bljdpfxjviqybj Ak Heg column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3 Bodpfx Aeud N Hdek Hslg  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: good (used), x-way 410 mm y-way 310 mm z-way 400 mm taper of the main spindle SK 40 table clamping surface 700 x 280 mm speed 45 - 2000 rpm quill stroke 63 mm total power requirement 2,2 kW Machine weight approx. 1300 kg space requirement approx. 2,1 x 2,1 x 1,7 m Voltage 400 V 3-axis digital display Heidenhain Fixed angle table Coolant device Bodpfsi Elydox Ak Hjlg Vertical milling head swiveling

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net Blodpfoh Rabnsx Ak Heg INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Configuration Coater 2: 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Blsdpshwv Tfefx Ak Hog Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Bsdpfx Akod Tx Aho Hjlg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, Options: Bedsycr Nujpfx Ak Holg Left side chip conveyor Coolant temperature control 15,000 rpm spindle High-torque spindle Linear scales on axes Losma extraction Automatic door Detachable handwheel 3-color signal lamp Renishaw RMP 600 Continuous 5 axes ISO 5-axis function Performance package Memory extension Robot interface

Year of construction: 2012, condition: excellent (used), Description to follow! Bedpfx Aox A H Rxok Helg