Cutting machine CEVISA - CHP-12

Cevisa CHP-12

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Bdjdpfozcngcox Af Aoh Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Bedpoyr Dmdofx Af Aodh Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg Bsdpfjvqbdysx Af Ajdh

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Bdedpfx Aewzyp Uef Aoh Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm Bdjdpfx Ajxlcpvjf Aoh CNC control: B&R PP 45 Hydraulic bundle clamping Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Bsdpfswuqbbjx Af Ajdh Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: Bdedjwm Nu Djpfx Af Aeh o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm Bsdsd Af Shepfx Af Aodh - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW - Space requirement: approx. W 550 x D 500 x H 700 mm - Weight: approx. 65 kg

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent Bdodpfx Afowd Ugts Ash --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2t Reeving 4/1 Lifting height 9m Bjdpfevx E Ixox Af Ajdh Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 3M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock