Type: BP 40.12
Manufacturer: BEZ Bratislava
Year of production: 1984
Welding power at 50%: 40 kVA
Maximum force between electrodes: 6.3 kN
Air pressure: 0.6 MPa
Water pressure: 0.2 MPa
Bs7hbva3qg
Machine weight: 580 kg
Spot welder, spot welder, spot welder, spot welder
-Stationary
-Operation by hand switch
-Arm length welding machine: 350 mm
-Welding gun type:
F3xuhub
-Control
-Dimensions machine: 1500/1000/H1670 mm
-Weight machine: 774 kg
-Dimensions control cabinet: 1550/420/H1960 mm
-Weight control cabinet: 330 kg
Spot welding machine make DALEX type SF 16/71
Machine # 2829926-5
technical data:
Rated power 16 KVA
Npvpt
Connected load 37 KVA
sec. Short circuit current 22,4 KVA
Electrode holding force 17 - 273 daU
Open circuit voltage 1.8 - 3.6 V
Number of welding steps 8
throat 350 mm
Weight 200 kg
with
- water-cooled electrodes
- foot pedal
used, in good condition
current capacity 50 kVA
throat 300 mm
contact pressure capacity 565 kg
short circuit voltage 118 kVA
voltage 380 V
rated capacity bei 50% ED = 50 kVA
Beolmortuq
total power requirement kW
weight of the machine ca. 700 kg
dimensions of the machine ca. 0,65 x 1,20 x 2,00 m
foot switch
- Serial-no.: 1180 / 63
- with 2 - manual engagement
- Nominal voltage primary 380 V, secondary 3.5-5.2 V
- Rated current at 50% E.D. primary 132 A, secondary 9600 A
- Short circuit current primary 310 A, secon...
electricity performance: 30throat depth: 600pressure performance: 600weight approx.: 200messurements (LxWxH): 1500 x 500 x 1500rated power: 15 bei 50% sonst 30welding capacity: 30short-circuit current, secondary: 15
H30lwkray
2X MACHINE IS READY FOR OPERATION
Leistung:
Kondensatorkapazität: 66.000 µF
Bolzendurchmesser: M2-M6 (M8)
Schweißfolge je nach Durchmesser: 6 - 14 Bolzen/ min
Bqzssckpjm
Automatische Kühlung durch Lüfter
Zubehör:
Die Anlage wird schweißfertig mit folgendem Zubehör ausgeliefert:
Kontaktpistole Typ AS 1802 mit 6,5m Schweißkabel
2 Massekabel mit Gripklemmen-Schnellanschluß
1 Satz Bolzenhalter M3,M4,M5,M6,M8
Schweißgerät: 13 kg
Schweißpistole 0,94 kg
Maße...
current capacity ca. 12 kVA
throat 345 mm
contact pressure capacity max. 1.800 N
Bi28iysbhu
connected load frequency 380 Volt
Furnishing:
- mobile spot welding machine
- with a mobile underframe
Spot welding machine, spot welding machine, spot welding system, spot welding gun
-Manufacturer: Dalex, spot welding controller type RA 11-2
Ffmmth7ok
-Voltage: 380 V
-Transport dimensions: 205/325/H455 mm
-Weight: 20 kg
Spot welding machine Fabr. ARO type PSM 150
Masch.# 1021
Technical data:
Rated output at 50% ED 15 kVA
Arm distance 190 mm
Throat depth 150 mm
3wodaiwmz
Electrode force 9.5-4.22 V / 5 levels
Primary voltage 380 V / 50 Hz
with
-extended special electrodes 250 mm projection
-separate control cabinet with 6 power levels
-Foot switch
used, in very good condition
current capacity 28 kVA
throat 350 mm
contact pressure capacity 550 daN
welding power in mm 4 + 4 st
steel plate in the continuous operation
light metal 1,6 + 1,6 mm
secondary current intensivity between 17.200 + 24.000 Amp.
electrode diameter 25 mm
normal electrode stroke ca. 50 mm
water consumption bei 2 bar= 340 Ltr./h
weight of the machine ca. 300 kg
dimensions of the machine ca. 0,9 x 0,5 x 1,5 m
Condition: good
Electric 380 Volt
Foot pedal
Electrode adjustment pneumatic
with wa...
current capacity max. 13 KW
throat 120 mm
contact pressure capacity max. 120 kp
Br83zjpuur
voltage 400 V
open-circuit voltage 2,5 V
output voltage 6300 A
welding power 2 x 2mm Blech
fuse protection -thermal 25 A
total power requirement 13 kW
weight of the machine ca. 12 kg
dimensions of the machine ca. 0,5 x 0,1 x 0,2. m
MACHINE IS READY TO USE
Ou9of
Mint condition
Ly23fuq
Spot welding device, spot welding machine, spot welding system, spot welding gun
-Manufacturer: Dalex, spot welding machine type RA 11-2
-Spot welding gun: Type 3151-2
-Rated power: 2.8 kVA
-Operation: by hand
-Transport frame: mobile, with drawers
-Transport dimensions: 800/410/H1010 mm
T2ywed0j
-Weight 80 kg
ready for use, used machine make JOKE-Josten+Kettenbaum
type PF 14 Nr.119/97/2, 12,5 KVA, throat approx. 650 mm,electrode force
160 KD, current time setting coarse 0,05 -- 5 sec., fine switching 1-6 switch-
water cooling, dimensions 1550 mm long x 370 mm wide x 1500 mm high, weight approx. 450 kg, welding process can be demonstrated.
materials from 3 to 3 mm, standing models with
welding time limiter from 1--10 sec.,time switch-off,water cooling,
foot switch, power 380 Volt - 25 KVA, electrodes,...
Branson Ultraschall Technologies Spot welder with universal Controller SBC, 159 134 341, MWX100
Model: 159134341, MWX100
General:
Spot welder and controller Versa GraphiX, MWX 100 + ATP-408E + SBC + 632-DA / 632-S
Note:
The monitor has a small damage on the display.
Accessories:
Actuator MWX100 SPOZ WELD:
B7tjoo2g
159 134 341
SBC:
40:0.8
V1A01188
200-240V AC, 5A, 50/60Hz, 800W
632-DA
125-240V AC, 50/60Hz
Spot welder FAN Proton I
Fronius FK 4000 R cooling unit
With tongs
Welding unit was hardly used.
C08cfbtu
Very good condition.
MACHINE IS USED READY FOR WORK
Bq0f09mncc
Roll seam welding machine in longitudinal seam design
Type DALEX PMS 11-4 Nl
throat depth: 550 mm
can be converted to 1050 mm throat depth
Rated power at 50 % ED: 80 kVA
Sec. short-circuit current: 32.3 kA
Sec. open-circuit voltage: 7 V
2s0r2u
Electrode force: 100-600 daN
Roller electrode diameter top 160 mm
Roller electrode diameter bottom 125 mm
weight: 640 kg
with switch cabinet according to VDE 0100
Main switch
Synchronous welding control 8036
Spot welding device, spot welding machine, spot welding system, spot welding gun
Bjntpzsbyg
-manufacturer: Dalex, spot welding machine type RA 11-2
-spot welding gun: Type 3111-8
-rated power: 2.4 kVA
-operation: by hand
-transport dimensions 430/460/H480 mm
-weight: 31 kg
current capacity 50 kVA
throat 550 mm
contact pressure capacity . kp
weight of the machine ca. 290 kg
dimensions of the machine ca. 640 x 930 x 1550 mm
Bp3ie8oqit
The machine is like new.
Power at 50%: 100kVA
Short circuit-current: 37kA
Electrode force: 100-600daN / single stroke
Throat depth: 550mm
---
Weld control: MPS 10-alpha (5-times, 8-program)
---
Extra Equipment:
Bt2mox7rhs
- foot pedal
- flow monitor
- main switch
---
Warranty: 6 months
---
Spotwelding electrodes + spare parts at stock
current capacity: 40 kVA
Gtzpnk
throat: 800 mm
contact pressure capacity: 0,13-0,80 MP
open-circuit voltage: 0,13-6,3 V
voltage: 6,3 kA
short circuit power secondary: 25 kA
cooling water consumption: 200 l/min
total power requirement: 100 kVA
weight of the machine approx.: 600 kg
space requirements of the machine approx.: L:1,7 x B:0,6 x H:1,6 m
open-circuit voltage: V
capacity/current 40kVA bei 50% ED
i.D.
OFFER 21107
Technical data:
- nominal power at 50% ED 25 kVA
- max. welding power 107 kVA
- throat adjustable 140 - 300 mm
- Welding values - sheet steel 6 + 6 mm
O9apt
- Brass sheet 3 + 3 mm
- aluminium sheet 1,2 + 1,2 mm
- Electrode force adjustable
- Control DALEX 1 - 01 TT
- foot switch
- Cooling water quantity 8 l/min
- Drive 380 V
- Space requirement approx. W 670 x H 1250 x D 1550 mm
- Weight approx. 240 kg
air-operated, water-cooled oscillating lever spot welding machine DALEX type SL 16/EA4
rated power at 50 % ED: 16 kVA
Sec. short-circuit current: 17 kA
Sec. open-circuit voltage: 1.8 - 3.6 V
Electrode force: 278 daN
arm reach: 180-500 mm adjustable
arm distance: 140 or 300 mm
with 8-step power switch
and asynchronous 4-time control
Example photo
Machine is currently being refurbished
O9q2l
Spot welding device, spot welding machine, spot welding system, spot welding gun
Bjrrkc9iwm
-Manufacturer: Dalex, spot welding machine type A11.1
-Voltage: 380 V.
-Transport dimensions: 230/270/H205 mm
-Weight: 20 kg
current capacity:20 kVA
throat:550 mm
max. short circuit power:42 kVA
max. welding power:34 kVA
open-circuit voltage:1,8V - 3,2V (in 8 Stufen) V
voltage:380 V
frequency:50 Hz
current:13 A
Lqjnd28z
dimensions of the machine ca.:0,4 x 1,2 x 1,3 m
Power at 50%: 20kVA
Short-circuit current: 15kA
Electrode force: 420daN
Throat depth: 130-500mm
---
Weld control: RS 17 (5-times, 2-program)
---
Extra Equipment:
- double foot pedal "currentless contact"
---
Warranty: 12 months
---
03kccqkx
Spotwelding electrodes + spare parts at stock
5
9 hours left
Incomplete
Z72uvhq
OFFER 16357
Technical data:
- Rated power at 50% duty cycle 63 kVA
- Max. welding power 154 kVA
- Overhang adjustable up to 700 mm
- Welding values - sheet steel 6 + 6 mm
- Brass sheet 4 + 4 mm
- aluminium sheet 3 + 3 mm
- electrode force adjustable 65 - 390 daN
- required air pressure 6 - 10 bar
- cooling water quantity 4 l/min
- control for: hold-open time; current time;
- hold time + hold open time, as well as
- pulse + pause time
- Drive 380 V
09vljzv9
- Space requirement appr...
Machine is still in production working
Complete with balanser and traverse.
power 22 kwa
kuhl w. Q 4 L/MIN
Tcoc8knj
Joisten & Kettenbaum
Biacz9nkym
current capacity 12,5 kVA
weight of the machine ca. 390 kg
Spot Welding Machine Type PL 40-DHK
overhauled / used
High-speed spot welding machine
version A = spot fitting with
foot switch and pre-mounted electrode holder,
closed cooling circuit
Btrgs7h3ke
Double lift cylinder
Basic equipment:
Standard throat depth 250-550 mm,
infinitely adjustable,
arm distance 150 or 310 mm,
single lift cylinder
Electrode force 100-600 daN.
Complete with:
Add-on control cabinet and welding control MPS 10 HW
Main switch according to VDE 0113
Rated power at 50% ED: 40 KVA...
OFFER 21108
Technical data:
- Rated power at 50% duty cycle 25 kVA
- Max. welding power 107 kVA
- Overhang adjustable 140 - 300 mm
- Welding values - sheet steel 6 + 6 mm
- Brass sheet 3 + 3 mm
- aluminium sheet 1,2 + 1,2 mm
Gjqoih8pm
- Electrode force adjustable 17 - 278 daN
- Control DALEX 1/ 01 TT
- foot switch
- Cooling water quantity 8 l/min
- Drive 380 V
- Space requirement approx. W 670 x H 1250 x D 1550 mm
- Weight approx. 240 kg
stationary, fully hermetic water recirculating chiller
with refrigeration compressor
cooling capacity 11.000 W
Pump capacity 50 l/min at 2 bar
Water tank capacity: 120 l
Water connections: G 3/4
Weight: 240 kg
Device is in reconditioning
Suwqi8
All materials that can be welded conventionally can also generally be welded with laser welding processes. In regard to quality, speed, and economy, laser welding systems are superior to conventional processes, making laser welding equipment and services popular offerings for industrial usage.
Bejsmq7mde
Joisten & Kettenbaum
serial number 121780
Biac0spwao
current capacity 20 kVA
weight of the machine ca. 400 kg
current capacity:7 kVA
throat:400 mm
contact pressure capacity:200 kp
dimensions of the machine ca.:0,8 x 0,45 x 1,1 m
Y7lzuify0
Electronic controller with a digital display that provides the ability to adjust the power and time of welding to the expected level.
Flexible working possibilities thanks to sliding electrode holders (the holders can be moved by 5 cm)
45kw 380v 2phase transformer,
Valve with air volume limiter
Water cooling
The range of welded sheets up to 3 + 3mm
P8a7sv
max. current output: 30 KVA
power output 50%: 15 KVA
outreach: 600
Ccuhequc
Pressure capacity: 600 kP 6 bar
water pressure: 200 kP 2 bar
weight approx.: 200
Dimension (LxWxH): 1500 x 500 x 1500
Nominal power: 15 at 50% otherwise 30
Welding capacity: 30
Short circuit current, secondary: 15
Spot welding machine TECNA very good maintained condition
Mobile Matuschek test welding stand with Messer Griesheim welding head.
Was used especially for test welds for fine wires approx. 0.3 mm - 1.5 mm and foils
Components: TG-3000 Igel BG-05 Scheißkopf FP 121, Igel RG-2000, Igel PD-EA, Igel PD-SP
O2js7
Joisten & Kettenbaum
current capacity 35 kVA
Pudlyq
weight of the machine ca. 300 kg
current capacity:100 kVA
throat:280 mm
capacity at 50%:100 kVA
pressure:1,1 t
stroke:100 mm
table-size:180 x 170 mm
control:MPS-29-K-S-R
total power requirement:279 kW
weight of the machine ca.:1,3 t
dimensions of the machine ca.:1,4 x 1,15 x 2,1 m
Y7mihrzol
spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off
Made in Germany
Rated power at 50% duty cycle: 63 kVA
Secondary short-circuit current: 45 kA
nominal primary voltage 380 V - 50 Hz
required back-up fuse 125 A,
open circuit voltage of 5.6 V
electrode force: 65-390 daN
throat 340 mm
Ndg2v
Electrode distance min 20 to max 180 mm
Machine weight 341 kg
not tested, without warranty!
Ka3qnw7x
DALEX roll seam welding machine in cross seam execution
with drive above and below
throat 350 mm
rated power at 50 % ED: 80 kVA
Sec. short-circuit current: 25 kA
Sec. open circuit voltage: 3,6 - 4,82 V
Electrode force: 20-600 daN
with add-on control cabinet according to VDE 0100'.
Cpate7ve
Main switch
high/low switch
Synvhron welding control MPS 100
weight: 615 kg
Painting: blue RAL 5010
little used - no traces of use
immediately ready for collection
goods on consignment
Spot welder, resistance welder
Power: 14,7 kW
Bpgl0gl0cv
sheet thickness: 2x3 mm
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
