Wire EDM machine
CHARMILLES Robofil 2030 SI

Name: CHARMILLES Robofil 2030 SI
Brand: CHARMILLES
Availability: InStock

Year of construction

2002

Condition

Used (fully functional)

Location

Хасково

Wire EDM machine CHARMILLES Robofil 2030 SI

Observe auction

Machine data

Machine type:: Wire EDM machine

Manufacturer:: CHARMILLES

Model:: Robofil 2030 SI

Machine number:: 124322

Year of construction:: 2002

Condition:: ready for operation (used)

Functionality:: fully functional

Technical details

Workpiece weight (max.):: 500 kg

Travel distance X-axis:: 318 mm

Travel distance Y-axis:: 218 mm

Travel distance Z-axis:: 114 mm

Provision

Location:: Хасково, Bulgaria – Distance: about 5,502 km

Availability:: as of end of auction

Delivery conditions:: FCA

Costs for dismantling & loading:
€500.00 (binding)

Pick up at location:
free

Shipping costs:

Description

TECHNICAL DETAILS
X-axis travel: 318 mm
Y-axis travel: 218 mm
Z-axis travel: 114 mm
U-axis travel: ± 48 mm
V-axis travel: ± 48 mm
Control system: PC-based, 14" color monitor, MS-DOS
Cone pitch/height: ±30° / 65 mm

Workspace
Type: Tub with swing door
Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm
Door width: 1,010 mm
Max. workpiece weight: 500 kg
Table dimensions (W × D): 560 × 440 mm
Distance floor to table: 1,050 mm
Dielectric volume: 240 l
Dielectric level control: Automatic

Wire EDM system
Wire diameter: 0.10 – 0.25 mm
Wire guide type: Diamond-enclosed guide, backlash-free
Programmable wire unwinding speed: 0.2 to 15 m/min
Programmable wire tension: 0.3 to 3 daN
Permissible coil weights and types (according to DIN): 1.6 kg
Permissible coil weight and types (according to JIS): 3 kg
Recovery of used wire: Wire shredding at the back
Automatic threading for wire diameters: 0.050 to 0.300 mm
Automatic rethreading for wire diameters: 0.070 to 0.300 mm
Minimum hole diameter for threading: 0.300 mm for 0.250 mm wire

dielectric
Type: Deionized water
Total volume of the dielectric: 900 l
Dielectric temperature: ±0.5 °C
Cartridge filters: 16
Volume of deionizing resin filling: 30 l
Deionization control: Automatic
Number of deionization bottles: 3
Spray pressure range: 0 – 20 bar
Number of programmable pressure levels: 16

generator
Max. processing speed (material: steel, wire: SW30X): 300 mm²/min
Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra
Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra
Available technologies: steel, cemented carbide, copper, graphite, aluminum, PCD, copper-tungsten

MACHINE DETAILS
Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm
Weight (without dielectric): 4,400 kg

Input voltage: 380/400 V
Power consumption: 12 kVA

The listing was translated automatically. Translation errors are possible.

Documents

18821486-01.pdf

Payment processing

Closing costs:: 18 %

Terms of payment:: 100 % prepayment

Payment methods:: Bank transfer

Invoicing will be in the amount of the highest bid plus any dismantling/loading costs and shipping costs as well as the closing costs and statutory VAT.

Details about the offer

Listing ID:: A18821486

Reference number:: AUC-2503138

Update:: 09.04.2025

Exclusive offer:: Only available in auction

Observe

Contact

Contact person: Cedric Schuhmann

Machine-ID: 18821486

+49 201 8... show

Telephone: +49 201 857 861 77

Machineseeker buyer protection

Secure payment via escrow account

Strictly controlled seller

Personal and multilingual support

Payout of the purchase price only after handover of goods

Inspection

Inspection possible

Machineseeker generally recommends inspecting used machinery.

All information is given to the best knowledge and belief. See for yourself on site.

Seller

Professional commercial seller

Bulgaria

Distance: about 5,502 km

Your machine could be offered here

Auctioning with the No. 1

You will sell within just a few weeks!

You will sell at the highest price!

You will sell with no fixed costs and no risks!

or call +49 201 857 861 10

Discuss collaboration

These listings may also fit your interest.

Listing

Mönchengladbach

7,039 km

Profile projector
BatySM350

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Baty SM350 profile projector - Powerful inspection for demanding applications The Baty SM350 is a sophisticated profile projector with a 350 mm screen and a robust, precise working platform with a measuring range of 250 mm x 125 mm. It is ideal for precise optical inspections in environments where reliability and accuracy are paramount. XLS: A simple 2-axis digital display for X and Y measurements, ideal for basic applications. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. Iedpfx Absuyh Rpj Iea FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This version includes optical edge detection and full reporting, including SPC diagrams and DXF overlays. The device is equipped with a 3-position lens turret that allows quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also offers advanced measurement functions such as edge detection and DXF overlays. These features make it the ideal solution for detailed inspections and demanding measurement tasks in the manufacturing industry

See details

Listing

Mönchengladbach

7,039 km

Profile projector
BatySM300

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Baty SM300 profile projector - Compact and precise optical inspection The Baty SM300 profile projector is a versatile and precise projector designed specifically for demanding quality control on the shop floor or production floor. With a vertical light path and a 300 mm screen, it is ideal for inspecting small and medium-sized workpieces. The SM300 offers a high resolution of 0.5 microns and a measuring range of 150 mm x 50 mm, enabling detailed and precise measurement of components. Iedpfx Aeuyh N Sjb Iea The device is available with different magnification lenses, including 10x, 20x, 50x and 100x, to meet the specific requirements of your inspection tasks. The GMR display, which enables full geometric functionality, is available as a display option on this profile projector. These features make the SM300 an ideal choice for quality control applications where precision and efficiency are critical. Features: 300 mm screen with finely ground glass for clear projections. Robust design suitable for use in harsh environments. Magnification options: 10x, 20x, 50x, 100x. Measuring range of 150 mm x 50 mm with a resolution of 0.5 micrometers. Integrated profile and surface illumination for sharp and precise images. Digital angle measurement and complete geometric measurement functions with the GMR display system. The SM300 is particularly suitable for workshops where reliable and precise inspection is required. The robust design ensures a long service life and consistently high measuring accuracy, even under difficult conditions.

See details

Listing

Wire EDM machine GF Machining Solutions CUT 1000

Nürtingen

6,831 km

Wire EDM machine
GF Machining SolutionsCUT 1000

Call

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg Iodpfxjxq Akws Ab Isa The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

See details

Listing

Erowa precision holder 25 Erowa ER-010607

Karlsbad

6,891 km

Erowa precision holder 25
ErowaER-010607

€184

Fixed price plus VAT

Call

Condition: used, Hello, we are offering ten used Erowa precision holders 25 (ER-010607) including clamping pins, which have been disassembled, cleaned and also functionally tested by us. The holders have the usual signs of use but are technically in very good condition. Price per holder with clamping pin plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Isdpfxoq Turie Ab Isa

See details

Listing

Mönchengladbach

7,039 km

Profile projector
BatyR600

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Baty R600 profile projector - Large format precision measurement The Baty R600 profile projector is a versatile solution for the optical inspection of large workpieces. With an impressive screen diameter of 600 mm and a measuring range of 450 mm x 200 mm, this device is ideal for extensive and complex inspection tasks. The device is equipped with a 4-lens turret that enables quick changes between magnifications (10x, 20x and 50x) without the need for recalibration. XLS: A simple 2-axis digital display for X and Y measurements, ideal for basic applications. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This version includes optical edge detection and full reporting, including SPC diagrams and DXF overlays. The R600 is available with advanced display options such as the FT2-E system, which offers touchscreen capabilities, automatic edge detection and full reporting. Thanks to the motorized axis control and optional CNC control, inspections can be fully automated, saving time and resources. These features make the R600 an ideal solution for demanding measuring tasks in the manufacturing industry Iodjuyh Nlepfx Ab Ioa

See details

Listing

's-Hertogenbosch

7,119 km

Profile projector NEW !!
DeltronicDH 216

€6,950

Fixed price plus VAT

Call

Listing

Mönchengladbach

7,039 km

Profile projector
BatySM20

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Baty SM20 profile projector - compact performer for optical inspection Iodpfx Abouyh N Eo Ija The Baty SM20 offers a vertical light path and a 500 mm screen, making it ideal for the inspection of medium to large workpieces. The device offers a robust design and a generous measuring range of 250 mm x 125 mm, making it ideal for precise inspections on the production floor. XLS: A simple 2-axis digital display for X and Y measurements, ideal for basic applications. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This version includes optical edge detection and full reporting, including SPC diagrams and DXF overlays. With a choice of magnification lenses (up to 100x) and advanced features such as digital angle adjustment and optional edge detection, the SM20 is ideal for a wide range of quality assurance and process monitoring applications. Users can also choose from a range of display options, from simple measurement functions to comprehensive reporting with the FT2-E variant.

See details

Listing

's-Hertogenbosch

7,119 km

Profile projector NEW !!
NikonV-20 B

€18,500

Fixed price plus VAT

Call

Condition: new, Nikon V-20 B profile projector NEW, never used (new price 52,400 euros) x,y 250 x 150 mm screen around 500 mm 10 x and 20 x magnification light through and light on the product Ijdpfx Abovlph Ao Ioa heidenhain quadra chek digital readout with various measuring/ and calculation functions turntable to align the product documentation

See details

Listing

Karlsbad

6,891 km

Square 15 holder
ErowaER-007986

€270

Fixed price plus VAT

Call

Condition: used, Hello, we are offering two used Erowa precision holders 15 including clamping pins. They have been disassembled and cleaned by us and a functional test has also been carried out. The holders have the usual signs of use but are technically in very good condition. Price for both holders with clamping pins plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Isdpfjq Hu S Dsx Ab Ioa

See details

Auction

Wire EDM machine CHARMILLES ROBOFORM 35 P

Baden-Württemberg

6,899 km

Wire EDM machine
CHARMILLESROBOFORM 35 P

€4,000

To the auction

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 251070/641311, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table width: 400 mm, table length: 500 mm, No minimum price - guaranteed sale to the highest bidder! Isdpfexqpv Tox Ab Isa The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel distance X-axis: 350 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 300 mm Table dimensions: 500 x 400 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 5 A Connection: 5 kVA Dimensions & weight Dimensions (L x W x H): 3,000 x 2,000 x 2,600 mm Weight: 3,000 kg EQUIPMENT Matching workbench Clamping devices Copper electrodes Documentation

See details

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.