CM Monorail shotblasting machine
CM Surface treatment Spa. M1500 Monorail

Name: CM Surface treatment Spa. M1500 Monorail
Brand: CM Surface treatment Spa.
Availability: InStock

Year of construction

1990

Condition

Used

Location

Soerendonk Netherlands

CM Monorail shotblasting machine CM Surface treatment Spa. M1500 Monorail

CM Surface treatment Spa. M1500 Monorail

Show map

Machine data

Machine type:: CM Monorail shotblasting machine

Manufacturer:: CM Surface treatment Spa.

Model:: M1500 Monorail

Machine number:: S3370

Year of construction:: 1990

Condition:: reconditioned (used)

Functionality:: fully functional

Operating hours:: 10 h

Price & Location

Location:: Vlassloot 5, 6027 RS Soerendonk, Nederland

Call

Technical details

Type of input current:: three-phase

Details about the offer

Listing ID:: A20370760

Reference number:: M1500

Update:: 24.10.2025

Description

CM M1500 Shot Blasting Machine
CM S 3370

Maximum product dimensions:
- Maximum product height: 1500 mm (measured under the hook)
- Maximum diameter: Ø 1200 mm
- Maximum weight: 700 kg
- Equipped with 2x load-bearing hooks
- 3x Turbine Ø 330 mm, 6-blade configuration
- 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors
- Hook movement manual
- Automated hook feed into the machine
- Automated door operation
- Fully overhauled CM shot blasting installation

Mechanical and electrical systems have been completely refurbished to specification:

Mechanical:
- Motors & drives completely disassembled, fitted with new bearings and new seals
- Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra
- All augers replaced and fitted with HARDOX auger flights
- All auger bearings replaced
- Abrasive media elevator fitted with new elevator belt, return wheels & bearings
- All chain drives & sprockets replaced
- Hook feed system to machine modernized
Hjdpfx Aasxqzmkomjh
- Hook drive system completely overhauled
- Compressed air supply replaced
- Pneumatic cylinders & valves renewed/overhauled
- 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm

Electrical:
- Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors)
- Siemens electric motors preventively rewound & tested, fitted with new bearings
- Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel
- Electrical control panel completely renewed with new relays, fully compliant with 2023 standards
- Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process
- Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits

The machine is fully operational and available for immediate sale.

The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media).

1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

The listing was translated automatically. Translation errors are possible.

Documents

20370760-01.pdf

Seller

Registered since: 2020

5 listings online

Call

Send inquiry

Telephone & Fax

+31 495 2... show

These listings may also fit your interest.

Listing

USED CNC-LATHE MANUF. MORI SEIKI, MODEL SL 253/500 MORI SEIKI SL-253B/500

Denmark

6,862 km

USED CNC-LATHE MANUF. MORI SEIKI, MODEL SL 253/500
MORI SEIKISL-253B/500

Call

Listing

Niederlangen

6,988 km

Suctions
NOVUSAirtower FT 20.000

Call

Listing

Rödermark

6,872 km

Continuous blast machine - profile edge
MUNK-SCHMITZStab.- + Profilkantenstrahlanlage

Call

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : Hodpsllvr Dsfx Aamsh - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

See details

Listing

Shot- & gritblasting Schlick Wheelabrator RB 1000G shot blasting

Deinze

7,244 km

Shot- & gritblasting
Schlick WheelabratorRB 1000G shot blasting

Call

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Hsdpfx Aaowikatsmeh Wordt op de vloer geïnstalleerd, geen fundering nodig! Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

See details

Listing

Blast container, blast hall Oliver Fritz GmbH & Co. KG SC.HC.SDO5800.2S

Großenlüder

6,821 km

Blast container, blast hall
Oliver Fritz GmbH & Co. KGSC.HC.SDO5800.2S

Call

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Hedeuwlzyjpfx Aamsh Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

See details

Listing

Wire belt blasting machine Rösler RDGE 800 - 4

Soufflenheim

6,931 km

Wire belt blasting machine
RöslerRDGE 800 - 4

Call

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter Hjdpfx Asv Idf Isameh With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

See details

Listing

Bar Transfer Powder Coating System Proton

Luckenwalde

6,581 km

Bar Transfer Powder Coating System
Proton

€3,20,000

EXW ONO plus VAT

Call

Condition: used, Year of construction: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Content of the facility ►1 piece - Gas-heated large powder furnace ►1 piece - Automatic powder coating booth ►1 Piece - Electrically Heated Small Powder Furnace ►1 piece - Manual monocyclone powder coating booth ►1 piece - room type monocyclone manual powder coating booth ►1 piece - Automatic chemical pre-treatment and drying system ►6 pieces - Automatic powder coating gun ►3 Pcs - Manual Powder Coating Gun ►1 piece - Automatic powder recovery unit ►5 pieces - monocyclone ►1 piece - Automatic control panel ►1 Piece - Automatic Rod Movement System Speed Controlled ►2 Pieces - Movable Platform Speed Controlled ►12 pieces - parking station ►300 m - conveyor rail ►12 pieces - hanging rods Our facility is located at Anhaltstrasse 30, 14943 Luckenwalde. You can make an appointment to view the machines. Hjdpoiivq Uofx Aamsh The system has been in use for 8 years. Since we are the direct manufacturer of the plant, we can make the changes you want to the machines by mutual agreement. It does not fit into your existing assembly space? Then we can make changes to the layout. Please check the system PDF file using the link below.

See details

Listing

Deskle

6,499 km

Sandblasting unit
TOSCATS-500

Call

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Hjdpfovpgq Nex Aamsh Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

See details

Listing

Enschede

7,014 km

Workshop press
AYEL-TECHWP-HD 100

Call

Listing

Coordinate measuring machine Mitutoyo Crysta-STRATO 9106 FAL A910

Tuttlingen

6,864 km

Coordinate measuring machine
MitutoyoCrysta-STRATO 9106 FAL A910

€9,900

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Machine type: Mitutoyo STRATO 9106 FAL-A910 Year of manufacture: 2001 Hodpfx Aoqz T H Asameh Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Accessories: Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Modifications and errors in the technical data and information as well as prior sale are subject to change!

See details

Advertise here