Centre lathe

Colchester Master 2500

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg Dodpfx Adou St S Aodocr

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 337-78, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, feed length X-axis: 730 mm, feed length Y-axis: 400 mm, feed length Z-axis: 425 mm, feed rate X-axis: 75 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 75 m/min, nominal power (apparent): 30 kVA, torque: 95 Nm, controller manufacturer: Siemens, workpiece length (max.): 940 mm, workpiece width (max.): 520 mm, workpiece weight (max.): 400 kg, total height: 2,880 mm, total length: 6,490 mm, total width: 2,725 mm, table width: 1,060 mm, table load: 500 kg, overall weight: 10,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 70 bar, spindle motor power: 15,000 W, number of spindles: 1, tool length: 300 mm, tool diameter: 78 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical data CHIRON FZ 15 W Magnum HS (German) Manufacturer: CHIRON Type: FZ 15 W Magnum HS General features: Machine type: High-performance machining center with vertical spindle Area of application: Milling and drilling for industrial applications Change system: High-speed basket magazine for fast tool change times Automation: Optional integration of robot systems or workpiece handling for series production Main spindle: Spindle speed (max.): 12,000 rpm Spindle power: 22 kW Spindle mount: HSK-A 63 Torque: 95 Nm Travel paths & axes: X-axis: 730 mm Y-axis: 400 mm Z-axis: 425 mm Rapid traverse X/Y/Z: 75 / 75 / 75 m/min Feed length X/Y/Z: 730 / 400 / 425 mm Feed speed X/Y/Z: 75 / 75 / 75 m/min Table & workpiece dimensions: Table width: 1,060 mm Table height: 430 mm Table length: 1,060 mm Table load: 500 kg Workpiece size (max.): 940 x 520 mm Workpiece weight (max.): 400 kg Tool magazine & handling: Tool holder: HSK-A 63 Tool positions: 48 / 64 Tool diameter: 78 mm (140 mm with free positions) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time: approx. 0.9 s Chip-to-chip time: approx. 2.1 s Electrical & operating data: Input voltage: 400 V Type of input current: Three-phase Djdpfx Aevxigfsddscr Operating pressure coolant supply: 30 / 70 bar Air connection: 6 bar Dimensions & weight: Total length: approx. 6490 mm Total width: approx. 2725 mm Total height: approx. 2,880 mm Total weight: approx. 10.5 t

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 Dsdpfx Adoufud Rjdjcr weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: excellent (used), Year of construction: 2011, Siemens 840 D, 40 tool positions, HSK 40, A-axis, direct measuring systems, hydraulics, IKZ 70 bar, chip conveyor with high ejection, paper belt filter, central lubrication system, workpiece support control, tool breakage control, tool life monitoring, fully integrated 6-axis robot with double gripper, integrated palletizing system, mineral cast bed, control cabinet cooler, Everything from a single source: transport, installation and commissioning can also be offered. Djdpfevxrzxex Addscr

Condition: used, Lead screw lathe US 400 (probably Weiler replica) Turning length: 1000 mm Center height: 200 mm Multifix B Spindle speeds: 31 – 2000 rpm 3-jaw chuck (⌀ 200 mm) Spindle passage: 45 mm Dodpfxsvzkpto Addscr Motor with brake Emergency stop switch Chuck protection

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm stroke 100 mm Dcsdpot Hw Ezefx Addsr total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Dodpfx Adou T E Ehsdecr Motor power: 7.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Dodpfsxykafjx Addscr Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE