Center lathe

Colchester Triumph VS2500

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Dcsdox Hrumepfx Ag Rjb Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: excellent (used), consisting of: 2 pcs. Art. No. 47155: Makro Grip 125 Centering Vise, clamping range 155 mm 1 pc. Art. No. 41350: Extended Stamping Unit 1 pc. Art. No. 41010: Center Marking Device for Stamping Unit 16 pcs. Art. No. 45570: Mounting Bolts, diameter 20 mm 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Art. No. 47355: Makro Grip 125 Centering Vise, clamping range 355 mm 1 pair Art. No. 44251: Avanti Base Jaws 4 pcs. Art. No. 44258.76: Top Jaw 77x126mm for Avanti 125 4 sets Art. No. 45570.10: Spacer Mounting Bolts, diameter 20 mm Djdsxauacopfx Ag Recb 2 pcs. Art. No. 47255: Makro Grip 125 Centering Vise, clamping range 255 mm 3 pcs. Art. No. 45742: Plate L384xW384xH27 mm, 4-position grid plate 96 (photo attached) 1 set Art. No. 47355-TG27: Twin-Grip Conversion Kit for Makro Grip 125 No. 47355 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Trolley for Stamping Unit

Year of construction: 2015, operating hours: 5,000 h, condition: ready for operation (used), General Data Machine weight 1800kg Main Drive Spindle speed range 2500 Dcjdpfx Agjx D Nwdj Rob This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Spindle speeds 0-2500 rpm Misc. accessories Dsdpjq Dll Defx Ag Rjcb MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 56 mm, turning length: 1,000 mm, For sale: used Weiler Commodor lathe, year of manufacture approx. 1990. Turning length: 1000mm. Swing over bed: 380mm. Swing over cross slide: 190mm. Spindle bore: 56mm. Spindle speed: 25–2000 rpm. Tailstock: MK4. Equipment: 2-axis digital readout by Heidenhain, 200mm three-jaw chuck, Multifix including 1 toolholder, coolant system, longitudinal and cross feeds, machine feet, various chuck keys, bed stop, live centres, complete documentation. Dcedpfx Ajxzu Ipog Reb

Condition: new, Year of construction: 2025, 0400 mm 246 mm 1250 mm Dcodpsxcyxcjfx Ag Rob 195 mm 54 mm 7,5 kW

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Dcodjxldidopfx Ag Rjb Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: excellent (used), Year of construction: 2019, Hainbuch centroteX quick-change system (2019 model) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Drawbar connection: M85x2 o Length: 53mm o Opening: 78mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o ID no.: 10000678 o Length: 136mm • 1x TOPlus mini Axle pull size 65 (A038530.008C) o ID no.: 10000676 o Length: 134.5mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179mm o Diameter: 210mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155mm o Diameter: 257mm • 1x monteq change system (A012708.0009B) • 1x D400 mobile container Dcedpev Ivaksfx Ag Rsb o Storage of the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side • Descriptions/Instructions • 1x Tool box with accessories Accessories • TOP65 clamping head (coarse for raw material) o 1 each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • TOP65 clamping head (hexagon) o 1 each: SW36, 45, 46, 50 • TOP65G clamping head (smooth) o each 1 pc.  d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs.  d38 • 1x boring ring for clamping head 65 • 50 clamping heads in total • Jaw accessories o for HWR 4-jaw chuck  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck  1 set of hard Reversible jaws o Various T-nuts + screws o Various spacer bolts for jaws (adjust the clamping length to the material) • Various soft jaws (2 pallets)

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Dsdpfx Asrtd Uwog Rscb Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath Dsdpfx Ajk Egrpsg Rocb - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set