Thermoformer

COLIMATIC THERA 650

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: Crodpfxox Ap Hpe Aa Nob -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: used, Year of construction: 1986, The Steriflow Barriquand 1351 Autoclave is an essential solution for sterilization and pasteurization in industrial environments. Thanks to its use of superheated water, it ensures maximum efficiency in preserving your food and pharmaceutical products. This model, dating from 1986, remains in excellent working order and continues to meet the high demands of modern production. Codou Dimyjpfx Aa Nerb What's more, this autoclave has six baskets, enabling it to handle large quantities. As a result, it is ideal for high-volume production requirements, while offering outstanding optimization of energy conservation. What's more, its Type B circuit guarantees reliable performance and consistent product processing. What's more, Steriflow, a renowned manufacturer of professional equipment, has designed this autoclave to offer not only exceptional durability, but also flexibility for a variety of processes. To find out how the Steriflow Barriquand 1351 Autoclave can improve your operations, visit our website. You'll find detailed information on its benefits and how it works.

Year of construction: 2011, condition: like new (used), functionality: fully functional, COLIMATIC THERA Crjdov Ablhspfx Aa Nsb ID.NO. 2902 Colimatic Thera 250 deep draw machine in new condition! Year model 2011 built-in vacuum pump Busch 63cc. Round tools with a diameter of 110 mm. Foil width 422 mm, rejection 170 mm Dimensions 345 x 100 cm H 190 cm.

Condition: excellent (used), Year of construction: 1999, Steam generator: VEA mod.UNIVEX 25G H13 + BWT water treatment and reverse osmosis system - Capacity: 1325kW - Steam generation: 2500 kg/h - Max pressure: 13 bar Steam boiler, Steam generator, Industrial boiler, Water treatment, Oil burner, Steam system, Energy industry, Operator-free system, Thermal power Crodpfx Aajucvi Ns Neb - working temperature: 195*C - Burner: WEISHAUPT (year of production 2016) - Year of production: 1999 - Complete documentation - Complete, modern water treatment: BWT

Condition: used, Refrigerant compressors system Bitzer -Type: 4EC-4.2Y-40S (x3), 4EC-6.2Y-40S (x3) -Volume: 22.7 m3/h (x6) -Cooling capacity for R404A: 90.5 kW at -5°C/40°C, 73.8 kW at -10°C/40°C, 42.4 kW at -25°C/40°C -Dimensions: 1900 x 800 x 1800 mm -Items in magazine: 1 Csdpjw Raz Iofx Aa Njrb -Reference number: Z116 -Condition: Used in very good condition, ready to work

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting Credpfxehqmame Aa Neb • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: good (used), This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – space-saving by compact design, – complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, Codpem Drylofx Aa Nerb – stable end product with reproducible quality by fully automatic process control, – the possibility for direct and indirect heating and cooling, – the possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarsegrained small pieces. In short: Time and cost saving with improved product quality. Capacity 900 l Voltage Electrical: 400V 50Hz 3N Installed Power 2x106 kW + 132 kW Main material Stainlees Steel Tank with mixer 2000 ltr

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device Cedpewld Tfofx Aa Njrb 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, Excellent condition, little used. We speak English, German and ex Yu languages. Contact possible also via WatsApp Credpfx Aajvcnuvs Nob

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Codoxdmgvjpfx Aa Norb Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm