Compressor

CompAir Q-52

Condition: new, feed pressure 11 bar intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm Gbjdpfx Aevkizgeg Doi

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 125 h, load capacity: 230 kg, empty load weight: 7,600 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated boom lift Transmission: Hydrostatic Condition: As new Gbedpfsupauqsx Ag Dsi Technical condition: Very good Front tyres type: Solid rubber Front tyres size: 18 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres size: 18 Rear tyres condition: 80 - 100% Description: The 180 ATJ articulated boom lift offers a lifting capacity of 230 kg with a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloped, and obstructed surfaces. Its off-road capability makes it the ideal working partner on construction sites with rough terrain. Thanks to the new progressive hydraulic speed control, both noise levels and fuel consumption are reduced. Like other engine-powered work platforms, its 4-wheel drive and 3 steering modes make maneuvering and positioning the machine easy on congested or tight sites. The design of the control panel ensures a clear operating environment for quick handling and immediate productivity. 230 V generator and sockets in the platform basket, SMS Safe Man System

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Gjdpfx Aoxq Elwjg Dobi

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Gjdjv Rmmmepfx Ag Debi

Condition: new, Year of construction: 2026, functionality: fully functional, Waste Baler BTS-MF75 in stock and available straight away The BTS-MF75 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine size: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (on request) Loading aperture: 700 W x 698 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Gbodpfx Aovah S Asg Doi Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strap eject for easy removal of bales Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Year of construction: 2001, pressure (max.): 10 bar, Screw Compressor Manufacturer: Atlas Copco Type: GA 11 FF Year of Manufacture: 2001 Gbsdpowivlusfx Ag Dei Technical Specifications Manufacturer: Atlas Copco Type: GA 11 FF (with integrated refrigeration dryer) Year of Manufacture: 2001 Floor-Mounted Design Control System: Elektronikon Max. Operating Pressure: 10 bar Motor Speed: 3000 rpm Rated Power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is subject to change. A live demonstration is available at any time in our showroom.

Year of construction: 1962, condition: good (used), machine/vehicle number: 162487, Suction capacity: 50 l/min Max. operating pressure: 10 bar Compressor speed: 1400 rpm Boiler: Operating pressure: 10 bar Capacity: 50 l Godpfsdyp R Rsx Ag Djbi

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: CAI710777, power: 7.5 kW (10.20 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA7 FF lubricated compressor is an ideal solution for businesses seeking reliability and efficiency in their operations. Designed by Atlas Copco, this pre-owned model delivers a power output of 7.5 kW, ensuring robust performance suitable for a wide range of industrial applications. Operating at a maximum pressure of 9.75 bar, the GA7 FF can meet the demanding requirements of your pneumatic system. The rugged construction of this equipment ensures long service life and optimal operation, even in challenging environments. Its compact design enables easy integration into most facilities without the need for major modifications. This Atlas Copco compressor stands out for its ability to reduce energy consumption while maintaining high production levels, ultimately helping to lower operating costs. This product is a wise choice for those seeking reliable and high-performance equipment on the used machinery market. Gedpex Uydrofx Ag Dsbi

Condition: excellent (used), Year of construction: 2015, operating hours: 51,498 h, functionality: fully functional, Atlas Copco GA18VSD+ screw compressor, 18.5 kW, 13 bar, 3.57 m3/min, with integrated frequency converter. Gsdpoyk Rxkefx Ag Djbi

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: ATLASCOPCO MODEL: GA18VSD S/N: API422436 YEAR: 2006 POWER (kW): 18.5 CAPACITY (m3/min): 3.35 PRESSURE (bar): 13 Gedpfx Agjyk Tk Aj Dobi