Used Mori for sale (469)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,000 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Axis Travel X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Ibjdsxgglkopfx Aabec Turning Capacity Turning length: 750 mm Swing diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centers: 750 mm Maximum bar diameter: 52 mm Spindle Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Maximum torque: 198 Nm Sub-spindle (B-axis) travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Turret Number of turrets: 2 Number of tool stations: 2 x 16 positions Square shank height: 20 mm Drill shank diameter: 25 mm Turret indexing time: 0.2 s Toolholder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid Traverse Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Dimensions & Weight Dimensions: 6500 x 3000 x 2500 mm Machine weight: approx. 5.1 t Total power requirement: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,280 h, functionality: fully functional, machine/vehicle number: NL201FH1430, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, TECHNICAL DETAILS Turning diameter: 356 mm Turning length: 510 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Bar diameter: 65 mm Travel X-axis: 260 mm Travel Z-axis: 590 mm Spindle drive: 15 kW Spindle speed: 5,000 rpm Ibedpjxhf Efjfx Aabsc Turret stations / with drive: 12/12 Rapid traverse - longitudinal/flat: 30 m/min MACHINE DETAILS Control: MSX 850 3 Electrical Data Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Rated current: 110 A Rated spindle motor current: 131 A Total power requirement: 32 kW Dimensions & Weight Installation space: approx. 2,320 x 1,783 x 1,819 mm Machine weight: approx. 5.8 t Operating Hours Spindle hours: 12,280 h Machining hours: 13,579 h EQUIPMENT Chip conveyor Extraction unit Tool setting arm Parts catcher Double foot switch

Condition: excellent (used), Year of construction: 2015, DMG MORI UNIVERSAL MACHINE CENTER DMU70 – Full 5 axis VMC Iedpfx Asxgpvxjabsbc Year 2015 Control : Siemens 840D SL Travel : X 700 Y 600 Z 520mm Swivel Rotary Table for Simultaneous Machining Table Ø800 x 620mm Spindle 18,000rpm ATC 30 – HSK-A63 Direct Measuring System – All Axis Touch Probe Heidenhain TS649 Laser Tool Measurement 3D quick Set Signal Light Electronic Hand-wheel

Year of construction: 2012, operating hours: 18,168 h, condition: ready for operation (used), Control Unit Model ITplus Ibodpfx Aajxpkp Ssbec Brand HEIDENHAIN Main Drive Number of spindles 2 Spindle speed range 5500 Tool taper VDI30 Number of axis 6 Turret Number of tool slots 12 Rotating tools Yes This 6-axis DMG MORI CTX ALPHA 500 V6 was manufactured in 2012. It features a Heidenhain ITplus control, a 12-holder turret with driven tools, and both C and Y axes for enhanced versatility. Main spindle speed reaches up to 5500 rpm, and the counter spindle up to 6000 rpm. VDI30 tooling interface enhances its capability. A great opportunity to buy this DMG MORI CTX ALPHA 500 V6 horizontal turning machine. Reach out for further details regarding this horizontal turning machine. Application Types Turning

Condition: used, Year of construction: 2017, Machine Description for 2017 Model: Horizontal Machining Center NHX 5000 Ibjdpfexnkgnex Aabec Manufacturer: DMG MORI Co. Ltd. Type / Model: NHX 5000_M730UM, Series J-NHX5000-C_C01 Year of Manufacture: 2016 Control System: MAPPS M730UM with CELOS / 21.5" ERGOline Touch Technical Data: • Working Area / Travel: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Max. workpiece diameter: 800 mm - Max. workpiece height: 1,000 mm - Distance spindle center to pallet surface: 80 – 810 mm - Distance pallet center to spindle reference plane: 70 – 950 mm - Pallet load: 500 kg [optional 700 kg] - Number of pallets: 2 - Minimum table indexing angle: 1° [optional 0.001° rotary table] • Performance / Spindle Speed / Drive Power: - Spindle type: speedMASTER® motor spindle - Spindle speed range: 35 – 15,000 rpm - Power: 30.7 / 26 / 18.5 kW (15% ED / 30 min / continuous) - Torque: 207 / 95.5 Nm (10% / 100% duty cycle) - Tool taper: BT40 / #40 - Tool magazine capacity: 40 tools [optional: 60 / 120 / 180 / 240] - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Tool change time (chip-to-chip): 2.5 s - Rapid traverse X/Y/Z: 60 m/min - Feedrate range: 0 – 60,000 mm/min - Acceleration: 1 G • Weight / Dimensions / Electrical Connection: - Machine weight (incl. coolant tank): approx. 12,000 kg - Installation footprint (W × L): 3,078 × 4,784 mm - Overall height: 2,852 mm - Coolant tank capacity: 800 L - Power supply: 37.3 kVA - Compressed air: 0.5 MPa / 420 L/min Equipment / Accessories: - NC rotary table with 0.001° indexing (DDM optional) - Automatic 2-pallet changer (rotary APC) - Two pallets with threaded holes and hydraulic fixture interface - Chip conveyor (rear discharge) - Direct measuring systems on X/Y/Z axes - Renishaw OMP60 spindle probe system - Tool breakage monitoring in the magazine - High-pressure coolant interface (70 bar, Knoll) - Coolant/air switching device for through-spindle supply - Rotating inspection window - Coolant gun - Oil mist separator interface Ø200 mm (LTA AC3002 optional) - Automatic loading station door - Signal tower (red/yellow/green/blue) - Portable manual pulse generator (handwheel) - Air filter unit for clean compressed air supply - 45 kVA transformer - Knoll KF110/700 high-pressure coolant unit (7.0 MPa, 31 L/min) - Three hydraulic clamping towers with double-jaw chucks - CELOS system with apps (Production, Accessories, Support, Monitoring, Configuration) - MAPPS M730UM control with 21.5" touchscreen and 15.6" sub-display - SmartKey® operator access management This technical description follows industry standards for horizontal machining center listings, ensuring clarity for prospective buyers on leading platforms such as Machineseeker.

Condition: excellent (used), Year of construction: 2018, operating hours: 11,000 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Our 2018 model, in very good condition, CMX 70U CNC 5-Axis Machining Center with Heidenhain control is now available for sale due to overcapacity. Our location is in Çayırova, Şekerpınar. The machine can be inspected on site. Only serious buyers are requested to contact us. Iodpsxm U E Eofx Aabsbc

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: Iodpjxpizgjfx Aabjbc - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: used, Year of construction: 2008, operating hours: 40,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, Working well located in Israel ready for inspect spindle hours 42000 in very good condition . Need make METI NC SYSTEM FS-18IMB(MAPPS 3) CRT SIZE (INCH) 15 INCH CUSTOMER FACTORY VOLTAGE (V) 380 V - 480 V FREQUENCY (HZ) 50 HZ SETTING UNIT MM EXPORT TRADE CONTROL ORDER APPLIED RELOCATED MACHINE SECURITY FUNCTION VALID PAINT COLOR COOL SILVER LANGUAGE ON NAME PLATES ENGLISH LANGUAGE OF INSTRUCTION MANUAL ENGLISH LANGUAGE OF MACHINE MANUAL ENGLISH X-AXIS TRAVEL (MM) 2050 MM Z-AXIS TRAVEL (MM) 600 MM SPINDLE (SPINDLE 1) SPEED (MIN-1) 12000 MIN-1 SPINDLE HOLE TAPER TAPER NO. 40 SPINDLE HOLE TAPER (#40) 7/24 TAPER #40 GRIP STANDARD (#40) MAS RETENTION KNOB STANDARD (#40) 90 DEGREE TOOL STORAGE CAPACITY 40 CHIP CONVEYOR OUTSIDE MACHINE PROVIDED TYPE OF CHIP CONVEYOR OUTSIDE MACHINE SCRAPER (DRUM FILTER TYPE) CHIP CONVEYOR INSIDE MACHINE PROVIDED COOLANT TANK 800 L COOLANT WATER-SOLUBLE COOLANT IN-MACHINE WORK MEASURING SYSTEM (SPINDLE) OPTICAL TYPE PROBE SENSOR (RENISHAW) IN-MACHINE WORK MEASURING SYSTEM (TABLE) ﾀｯﾁｾﾝｻ･MP4(ﾚﾆｼｮｰ) ADDITIONAL AXIS INTERFACE 付加2軸 MOTOR FOR ADDITIONAL AXIS USER ROTARY TABLE FOR ADDITIONAL AXIS USER ROTARY TABLE TYPE 回転軸､傾斜軸共 STEP-DOWN TRANSFORMER PROVIDED Iedpfxew Tutwo Aabjbc STEP-DOWN TRANSFORMER CABLE PROVIDED LANGUAGE ON NC SCREEN ENGLISH LANGUAGE ON PC SCREEN ENGLISH LANGUAGE ON WARNING SCREEN ENGLISH LANGUAGE ON MAPPS2/3/4 SCREEN ENGLISH PART PROGRAM STORAGE (M) 1280 M NUMBER OF STORED PROGRAMS 63 USER MEMORY AREA(BUILT-IN MAPPS) 50 MB NUMBER OF TOOL OFFSET PAIRS 64 NUMBER OF WORK COORDINATE SYSTEM PAIRS 6 NUMBER OF CUSTOM MACRO COMMON VARIABLES 82 AI NANO HIGH PRECISION CONTOUR CONTROL PROVIDED LOAD MONITOR C (SOFT-KEY TYPE)

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Ibsdpfjxgk Nmex Aaboc Control : Heidenhian Spindle 12,000rpm Taper : BT40 ATC 30 Immediate Delivery

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements height 2803 mm Machine weight 11300 kg Control Unit Brand SIEMENS Model 840D Main Drive Spindle speed range 12000 rpm Spindle motor power 15 / 11 kW Movement X-Axis Movement 730 Y-Axis Movement 730 Z-Axis Movement 880 Additional Equipment Tool Magazine Capacity: 40 pockets (wheel type) / Tool Diameter (Occupied Neighboring Pockets): 70 mm / Tool Diameter (Free Neighboring Pockets): 170 mm Maximum Tool Length: 450 mm / Maximum Tool Weight: 12 kg / Chip-to-Chip Time: min. 3.3 sec / max. 8.2 sec Pallet Change Time: 9.5 sec Footprint (Including Chip Conveyors): approx. 12.5 m² Ibsdpexpkl Hofx Aabec This 4-axis MORI SEIKI NHX 5000 was manufactured in 2012. Ideal for precision machining, this horizontal machining centre ensures reliable performance. Consider the opportunity to buy this MORI SEIKI NHX 5000 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm Iodpjxnkdmsfx Aabjbc - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: used, Year of construction: 2015, As good as new CTX Alpha 300 Only: 4,200 operating hours Ijdjxn Ur Uspfx Aabjbc Accesories: fully equipped tool cabinet (driven tools, jaws, holders, etc.) Control: Siemens 840D Ergoline Shop Turn Swing diameter over bed: 380 mm Swing diameter over face slide: 290 mm Travel: X-190 mm, Z-335 mm Y-axis: +-40 mm Spindle speed: max. 5,500 rpm spindle hole: 73mm tool turret: 12-speed drive tool holder: VDI30 Tailstock with quill: , Tool measurement: in the workroom C-axis: , Coolant system: , suction: ,

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Universal Machine Center Iedpewvra Ijfx Aabobc 5 axis simultaneous DMG DMC 105V Linear Year 2007 Travel : X1050 Y 800 Z 560mm NC Rotary Table Ø1,000mm Heidenhain iTNC530 Control Spindle 18,000rpm ATC 30 HSK-63A NC B axis Control Milling Head – 120o / +30o Roto clear window Tool Measuring system – Blum Measuring probe Cooling by air blast through spindle by M code Spindle through coolant Chip conveyor ____Clarence sales _____

Condition: ready for operation (used), Year of construction: 2021, operating hours: 13,392 h, Control Unit Brand SIEMENS Model 840D with ShopTurn 3G Main Drive Spindle speed range 6000 Spindle motor power 13/14 kW Tool taper ISM 52 Synchro Number of axis 5 Media Chip conveyor Yes Additional Equipment CELOS Products DMG MORI Service Agent DMG MORI NetService DMG MORI IoT Connector DMG MORI Messenger V2 SERVICE Camera Tail Stock the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). This 5-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Isdpfsxn U Dkox Aabsbc Application Types Turning

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Iedpjw Hxiwsfx Aabebc Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, General Data Measurements width 2665 mm Measurements depth 3065 mm Measurements height 2840 mm Machine weight 5600 kg Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 20 – 12000 Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 600 kg Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 Media Power consumption 20 kVA Additional Equipment Job Shop package Renishaw PP40 wireless workpiece probe TS27R tool measurement probe Scraper-type chip conveyor Coolant tank capacity: 200 L (left side) Coolant pump: 20 bar internal through-spindle coolant Isdpexn Uz Nofx Aabobc Machine enclosure roof LED work area lighting This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand SIEMENS Model 840D sl Operate with CELOS® Movement X-Axis Movement 560 Y-Axis Movement 560 Z-Axis Movement 660 Ibsdoxpktdopfx Aabsc Media Chip conveyor Yes Additional Equipment Tool breakage control system in the tool magazine Two pallets with threaded holes Automatic turning APC with 2 stations Direct distance measuring system Rotating viewing window in the work area door Coolant rinsing gun I/F for oil mist separator Knoll KF110/700 compact filter system Spindle sensor measuring system with optical signal transmission / Cooling unit for spindle Signal light (red, yellow, green, blue) This 4-axis DMG MORI NHX 4000 was manufactured in 2017. A robust horizontal machining center, it features a travel range of 560x560x660 mm and a clamping surface of 400x400 mm. The machine has a tool magazine with 60 slots. Tool Holder is HSK 63 HSK-A63 motor spindle Spindle speed 20 - 20,000 min-1. The machine includes a CELOS® control system with Siemens 840D sl Operate, enhancing usability with a multi-touch screen. For more information about this horizontal machining center, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model iTNC530 HSCI Main Drive Spindle speed range 20-28000 rpm Spindle motor power 55/43.5 kW (40/100%DC) Movement X-Axis Movement 1050 Y-Axis Movement 800 Z-Axis Movement 560 Additional Equipment Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type Iodpfsxl H Enox Aabjbc Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Ibjdpfx Aajxlvahjbsc Workpiece drm 400 mm This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Application Types Turning

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1730 Measurements depth 2110 Measurements height 1820 Machine weight 4500 Isdpfxjxpkl Tj Aabobc Main Drive Spindle speed range 45 - 4500 Spindle motor power 11 kW Movement X-Axis Movement 235 mm Z-Axis Movement 520 mm Workpiece Workpiece drm 390 mm Additional Equipment Hinged belt chip conveyor Some accessories would also be included (see photos) This MORI SEIKI SL-204 MC was manufactured in 2001. A lathe equipped with an MSG-805 control system, featuring X-axis travel of 235 mm and Z-axis travel of 520 mm. It includes a spindle speed range of 45 - 4500 rpm and a spindle motor power of 11 kW. Ideal for precise and efficient turning operations. Contact us for further details regarding this lathe. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,834 h, Control Unit Ijdjxn Uxuepfx Aabsbc Brand HEIDENHAIN Main Drive Spindle speed range 10000 RPM Tool taper SK 40 This 3-axis DMG MORI DMC 1035V was manufactured in 2011. It features a vertical machining center with a 30-tool automatic tool changer, SK 40 tool holder, and a spindle speed of up to 10,000 RPM. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1035V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,843 h, General Data Machine weight 2600 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 20–15000 Number of axis 5 Movement X-Axis Movement 650 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 520 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 475 mm Z-Axis Rapid Traverse 42 m/min Tools Type of tool holder SK40 Iodpfx Asxnr I Tjabjbc This 5-axis DMG MORI DMU 50 3rd Gen was manufactured in 2018. It features a spindle speed up to 15,000 min−1, a 30-place SK40 tool changer, and a CELOS control system with Siemens 840D sl Operate. The machine includes a swivel rotary table with a clamping surface of D630 x 500 mm and a 360° rotary axis. Consider the opportunity to buy this DMG MORI DMU 50 3rd Gen vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 15000 Number of axis 3 Movement X-Axis Movement 1100 mm Y-Axis Movement 560 mm Z-Axis Movement 510 mm This 3-axis DMG MORI CMX 1100 V was manufactured in 2022. It features a Heidenhain TNC 640 control, 15,000 rpm spindle, and a 30-tool ATC. The machine offers a 1400 × 560 mm table and rapid traverse of 30 m/min. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 1100 V machine we have for sale. Contact us for more information. Iodpexl H Atofx Aabobc Application Types Milling

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2483 mm Measurements depth 5320 mm Measurements height 2205 mm Machine weight 7800 kg Movement X-Axis Movement 300 Z-Axis Movement 1050 Iodpexg Ukujfx Aabjbc This DMG MORI EcoTurn 510 was manufactured in 2014. A robust horizontal turning machine, it features a max swing diameter of 680mm and a turning diameter of 465mm. Equipped with a Siemens Sinumerik 840D CNC control, it ensures precision and ease of operation. The main spindle supports a bar capacity of 90mm with a maximum speed of 3250 rpm. Ideal for those looking to enhance their turning capabilities. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 2710 mm Measurements depth 3900 mm Measurements height 2470 mm Machine weight 10000 kg Main Drive Spindle speed range 5000 Spindle motor power 14/17 kW Number of axis 5 Additional Equipment Dynamic two-pressure clamping for the main and counter spindle Tailstock function for the counter spindle with foot switch This 5-axis DMG MORI CLX 450 TC + Robo2GO was manufactured in 2024. It features a universal turning/milling center with a main spindle speed of up to 5000 rpm and a milling spindle speed of up to 12000 rpm. The machine includes a B-axis of ±120°, Y-axis travel of ±100 mm, and a 30-fold chain magazine. It's equipped with Siemens 840D sl control for precision. Consider the opportunity to buy this DMG MORI CLX 450 TC + Robo2GO turn-mill centre. Contact us for more information. Ibjdpfx Aajwwxirjbsc Application Types Turning