CNC vertical lathe

Dörries CTE 160

Condition: good (used), Year of construction: 1978, Dörries CTE 1600 / vertical turning lathe (vertical turret lathe), year of manufacture 1978, R & D MTC 3+ control, turning height 1500 mm, control system completely overhauled in 2010, table diameter 1600 mm, turning diameter 1800 mm, table speed: 200 rpm, max. vertical stroke 1200 mm, weight: 25,000 kg, documentation available. Kodpox Agwlofx Adwowt

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 Kwodjww Nazspfx Adwot speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Year of construction: 1978, condition: ready for operation (used), A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible. Kedpsxq Ex Dsfx Adwowt

Condition: used, Year of construction: 1998, swing diameter 2000 mm table diameter 1800 mm turning height 1500 mm Control Siemens Sinumerik 840 C Ksdpfxoxap Eyj Adwewt table turning speeds 0-280 U/min feed range 0-18000 mm/min workpiece weight max. 12000 kg total power requirement 177 kVA Feed drives: - Crossbeam support, vertical and horizontal mm/min - Crossbeam support, rapid traverse 18000 mm/min - Crossbeam adjustment speed 425 mm/min Milling drive: - Milling drive power 30 kW - Number of gear stages 2 stages - Stage jump 3.17 - Speed range of the 1st gear stage 10 - 224 - 950 rpm - Speed range of the 2nd gear stage 32 - 72 - rpm Tool system, cutting force: - Tool system 250.2 - Milling spindle holder according to 69871-A SK 50 - Cutting force on turning tool 50 kN Equipment/accessories: - Tool measuring probe - Various turning tool holders - Various clamping jaws - Various clamping devices - Various SK 50 mountings - Grinding spindle - Powered tools - Tool changer/head changer - Hydraulic unit - Chip conveyor - Technical documentation

Condition: excellent (used), functionality: fully functional, Swing over bed: 1290mm Swing over cross slide: 910mm Swing in gap (l:500mm): 1580mm Center distance: 6000mm Spindlebore: 155mm Spindle speed: 6-800rpm Spindle nose: ASA A2 11" Workpiece between centers: 20 tons Taper in tailstock: Mk6 Longd.feed: 0.045-5mm/r Crossfeed: 0.0220-1.5mm/r Thread metric: 0.5-56 Thread's modulus: 0.25-28 Threads whitworth: 1/2-84/ " Spindle motor: 30 hp Manufacturing year: 1971 Length: 9500mm Width: 2000mm Height: 1600mm Weight: 13400kg Kjdpfx Ajwc Nzpjdwowt Sony DRO cross slide 3 pcs. Steady rests Face plate 4-jaw chuck Hardened guideways Power on topslide

Condition: used, Year of construction: 2017, Used 2017 HAAS ST15 with tailstock, tool setter, parts catcher & swarf conveyor. Ready for demo in the Bristol showroom. Chuck Size 210 mm Max Part Swing 419 mm Max Cutting Diameter (with BOT turret) 305 mm Max Cutting Diameter (with VB turret) 305 mm Max Cutting Diameter (with VDI turret) 173 mm Max Cutting Length (varies with workholding) 406 mm Bar Capacity 64 mm X Axis Travel 200 mm Z Axis Travel 406 mm Spindle Nose A2-6 Max Rating 20.0 hp 14.9 kW Max Speed 4000 rpm Max Torque 150.0 ft-lbf @ 500 rpm 203.0 Nm @ 500 rpm Spindle Bore ø 88.9 mm Kodovkwg Dopfx Adwswt Control: HAAS Specs: Spindle Bore 64 mm | Swing 419 mm | Travel X 200 Z 406 mm Accessories: Tool setter, Parts catcher, Swarf conveyor

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, workpiece weight (max.): 12,000 kg, travel distance X-axis: 1,900 mm, travel distance Z-axis: 1,400 mm, spindle motor power: 1,00,000 W, spindle speed (min.): 60 rpm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, turning diameter over cross slide: 2,200 mm, turning diameter: 2,200 mm, total height: 2,000 mm, feed rate X-axis: 8 m/min, Equipment: rotational speed infinitely variable, Machine Fresh from production Test and quaility controlled next 6 weeks Manufacturing year 2025 Kwedpfevc Ei Rsx Adwot WAIT FOR OFFERS

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: C3300, grinding length: 4,500 mm, grinding width: 300 mm, table length: 4,500 mm, table width: 300 mm, space requirement height: 2,500 mm, space requirement length: 13,700 mm, space requirement width: 2,500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Sanding length: 4500mm Sanding width: 300mm Workpiece height: 250mm Swivel range table or sanding arm: +-90 degrees Kwsdpfstqtn Dex Adwjt Segment head diameter: 560mm Spindle diameter in front bearing: 120mm Swivel range: 2° Max. Torque: 719,5Nm Motor: B280, 55kW Grinding spindle speed range: 0-730 rpm Control system: BBC Baumüller drives Marposs measuring system Hydraul. Clamping Sanding mist extraction system: Hydrocyclone cleaning system Additional sanding unit ZU Feed rate: 2000-35000mm/min Space requirement approx. 13.7x2.5x2.5m

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm Kwodsvb Dcaopfx Adwet main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,650 mm, travel distance Z-axis: 700 mm, spindle motor power: 52,000 W, spindle speed (max.): 400 rpm, turning diameter over cross slide: 1,900 mm, turning diameter: 1,900 mm, turning height: 1,700 mm, rotational speed (max.): 400 rpm, input voltage: 400 V, workpiece diameter (max.): 1,900 mm, clamping diameter: 1,300 mm, faceplate diameter: 1,300 mm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, DYE TVC 1300 – Reconditioned CNC vertical lathe | large diameter & heavy-duty performance Special offer: Fully reconditioned CNC vertical lathe, ideal for large workpieces and demanding machining tasks. Ready to operate, includes full documentation. 🛠 Key technical specifications: • Chuck diameter: 1300 mm • Max. turning diameter: 1900 mm • Max. turning height: 1700 mm • Vertical ram travel: 1200 mm • X-axis travel: 2650 mm • Z-axis travel: 700 mm • Main spindle motor power: 52 kW • Spindle speeds: o Range 1: 0–100 rpm o Range 2: 0–400 rpm • Driven tool motor: 24 kW • Driven tool speeds: 0–2000 rpm • CNC: FAGOR 8065 with dual-channel execution ⚙️ Included equipment: • C-axis with angular Heidenhain encoder ±5 • 6-position turret, including dual-output CAPTO C-6 • Automatic dual pallet changer • New telescopic steel guards on X-axis • New electric cabinet and wiring (CE compliant) • Includes PLC programming, project design, and full documentation Kjdpfxemdqibj Adwjwt ✅ Ideal for: • Heavy industry part manufacturers • Complex large-part machining • Shops requiring turning over 1.5 meters in diameter 📌 Professionally reconditioned and ready for immediate delivery. An excellent choice for shops demanding precision, torque, and large-scale capability.