Screener

DB Engineering Ltd. Traserscreen DB-80

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: Chedpfx Aoua D Aljddjf weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw Chodeff Sbispfx Addsf air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2023, condition: new, Stock machine Chedpfxohwdvce Addjf Completely redeveloped high efficiency centrifuge based on our many years of production experience with the predecessor of this centrifuge, we have made various improvements with regard to maintenance costs, downtime and wear and tear parts.

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, cutting force: 900 t, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Chjdpfx Aexg Ekfeddsf

Condition: reconditioned (used), Year of construction: 1998, The redom SE200 used separation table is fully operational, can be seen and is available on site in Poland. In 2019, the machine underwent a thorough renovation. The Redom separation table works on 3 basic principles, eccentric speed, airflow and the angle of inclination of the table. From the market-leading Redoma company, now part of Eldan's recycling machine company, the SE200 has a throughput of up to 2000 kg/p/h. Suitable for all types of dry electric granulated, the SE200 table used produces 99.5% pure copper product. Simple to set up and use, the Redom SE200 has an eccentric 3 kW power unit and an 11 kW blower motor. Redoma SE200 Dimensions: Length: 2.7m Codpfxjin Ndwo Addehf Width: 1.8m Height: 2.2m Weight: 1,700Kg

Condition: like new (used), Year of construction: 2025, operating hours: 2 h, COMPLETE COPPER SORTING AND GRANULATION LINE COMPOSED OF: FEED CONVEYOR SHREDDER WITH EXTRACTION DISCHARGE CONVEYOR DOUBLE DENSIMETRIC TABLE DISCHARGE CONVEYOR TURBO GRANULATOR DENSIMETRIC TABLE 2 Codpfxewb S Nmj Addohf DISCHARGE CONVEYOR SIEVE DUST FILTRATION COMPLETE CONTROL CABINET SPARE PARTS ONE ADDITIONAL TURBO GRANULATOR IN STOCK. BRAND NEW EQUIPMENT. Sold with all interconnecting electrical cables.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Chjdpfx Adeua Tbwodof SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Cedpfxeqi Eh Hs Addohf Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Year of construction: 2025, operating hours: 1 h, condition: new, - Single-deck screen box (1m x 2.2m) - Fines discharge conveyor - Oversize discharge conveyor - Efficient, diesel-powered hydraulic system - Foldable conveyors for transport - Dual-axle trailer brake Chodpfowk I Rrex Addjf - LED street lighting - For loading by excavator/wheel loader or directly from a crusher - Compact design / Easy to transport / Simple setup / Versatile Transport LxWxH (mm): 5500/2191/2428 Working length/width/height (mm): 5500 x 6878/2048 Deck size (mm): 2200 x 990 Screening media size (mm) → Several options available Loading height (mm): 2100 Emissions Stage 5 / Diesel Unladen weight 3,280 kg A single-deck vibrating screen for processing a wide variety of materials The screening plant is mounted on a car trailer chassis, allowing it to be towed behind any 4x4 or Jeep with a towing capacity of up to 3,500 kg. Transport to the construction site is very easy. Setup is very quick; the four legs are placed at each corner and the conveyor belts are unfolded. unfolded. Once the screening box and conveyor belts are running, the machine is ready for material. Ideally, it is fed using a small excavator, a skid steer loader, or a small telehandler with an appropriate bucket size. The screen mesh size can be easily changed to produce the desired product for the customer. With its compact design and impressive performance, the GP28 is a versatile machine for topsoil and aggregates. The small, efficient powerhouse ensures low operating costs and is easily accessible for service and maintenance.

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® VS Medi offers a robust and powerful platform for a wide range of screening tasks. With two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors where many different materials need to be processed within tight time frames. Additional elements such as bars, hoppers, support feet, and a separating plate can also be installed on the machine (the separating plate is only required for the double-deck vibrating screen, as shown in the images). Upon customer request, it is also possible to install screens with different mesh sizes and shapes, or perforated plates with different perforations. We offer the ASCO® VS Medi vibrating screen as a single-deck or double-deck screening system. Cedpjtrfn Hsfx Addehf All loose materials are possible, such as excavated soil, humus, soil, compost, wood chips, bark mulch, sand, gravel, construction rubble, recycled material, crushed stone, scrap, and metal shavings. Technical specifications: - System capacity: 20-60 t/h - Maximum bucket width: 2.3 m - Screening area: 5.4 m² - Drive power: 400 V / 2 x 0.75 kW - Weight: 1240 kg - Width: 2.54 m - Length: 1.56 m - Height: 2.49 m - Loading height: 2.13 m Options: - Rods - Hopper - Support feet - Separator plate