200-2500 bar 21-300 l/min. Electric

DEN-JET CE150

Condition: good (used), Year of construction: 2007, operating hours: 9,953 h, functionality: fully functional, total width: 2,440 mm, total length: 7,150 mm, total height: 2,590 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 12,500 kg, rotational speed (max.): 1,700 rpm, water tank capacity: 1,600 l, empty load weight: 12,500 kg, power: 480 kW (652.62 HP), water pressure: 1,000 bar, cubic capacity: 15,874 cm³, pump capacity: 193 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Similar, but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Switching valve for 4 consumers, each with separately adjustable pressure. Drive speed: 1700 rpm Kdjdpfxewz Ekqo Aadsw Plunger: d50 mm Drive power: 360 kW With 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine With workshop and changing room. Dimensions LxWxH: approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Year of construction: 2005, condition: good (used), machine/vehicle number: A5.01077.0181, Stationary high pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Working pressure: 650 bar Delivery rate: 45 l/min. Drive speed: 1500 rpm. Driving power: 54 kW Kdedpeix I Ndofx Aadjw with SIEMENS electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.400x720x1.160 mm weight: approx. 800 kg Year of manufacture: 2005 Condition: In good used condition.

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, Ksdpfxohtnnis Aadedw with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Kodpfxechhfuo Aadjdw Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: excellent (used), Year of construction: 2010, Technical data: Working width: 3100 mm Max. bending capacity of normal steel St40: 12.0 mm Max. bending of normal steel St40: 10.0 mm Top roller diameter: 270 mm Side lower roller diameter: 270 mm Middle lower roller diameter: 250 mm Cone bending device Mobile control panel Kdjdpfx Aasvy H Hxedjw Hydraulic folding bearings CE mark Engine power: 11 kW Dimensions (length x width x height): approx. 4600 x 1500 x 1500 mm Own weight: approx. 10 tons Accessories: Top bending aid Side bending aid The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Kedpfx Aaoud H Tnedjdw Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 580, cutting length (max.): 5,180 mm, total length: 6,400 mm, overall weight: 580 kg, gas-powered mobile saw SMG EUROPA 1000 - rigid structure 100% steel - 100% welded HONDA 25 hp - 800 cm3 engine max. diameter 100 cm - sawing length 518 cm max opening between rollers 71 cm 35mm blades - 22.2 mm pitch - length 4245mm. Blade height locked by electric cylinder; manual positioning handwheel with return spring for fast, precise work. push feed Kdedpfx Aaeq H H E Nedow specific trailer for moving to cutting area (optional) Optional sharpening/cleaning kit for blade maintenance optional hydraulic cylinder for taper adjustment extensions and additional rail for cutting long lengths immediate availability

Condition: ready for operation (used), A Hako compact sweeper with 2 disc brushes and central suction is available. Axle loads 1/2: 1200kg/1500kg, turning circle: 1390mm, engine: Yanmar 3TNV88C, power: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, forward/reverse speed: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions X/Y/Z: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Kdsdpfxjwaa Hqs Aadow

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ Kjdewbh Ifopfx Aadedw ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2017. Mobile compressor ATLAS COPCO XATS 138 machine after full service!!! Technical data: Ksdpfx Aeid Iy Hoadodw capacity 5,00-7,00 m3/min; working pressure 7-10.3 Bar; year of production 2017; KUBOTA engine mileage 500 h !!!!!; compressor fully operational Below is a link to the video , showing the work of the machine Compressor ATLAS COPCO XATS138 7.00m3 2017 tank capacity 0 l