Press container with tipping system

ATS N 20 SHA HKV

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Nedpfxswp Rqfo Akfjwf Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2025, pressing force: 38 t, power: 5.5 kW (7.48 HP), New on stock Njdswhfu Ajpfx Akfjwf Avermann MPC 20 PEL Optional with Bin Lift

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Nwodpfxewg R Rts Akfjf

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph This Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility.Production Cycle of the Used filling monoblock GAI This monoblock, likewise, maintains a stable production cycle, limiting fluctuations in temperature and pressure inside the bottles by optimizing control over filling conditions. The Used Filling Monoblock GAI 2405 1500 bph, as a result, synchronizes each stage of the process, minimizing waiting times and maximizing efficiency.Compatibility and Versatility The Used Filling Monoblock GAI 2405 1500 bph adapts perfectly to glass bottle production in various formats, with a capacity range from 0.75 L to 1.5 L. This versatility, in conclusion, makes the machine ideal for medium-volume bottling lines, thus optimizing the production process while, indeed, maintaining high-quality standards. Nodpfx Asvgvcvskfswf

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel - from technical center (machine was used exclusively for test/demonstration purposes Nodpfxjh Rwc Ej Akfewf - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Nwjdpehwrgtefx Akfef CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Njdpfx Aeif Ek Rjkfjwf • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: like new (used), mileage: 1,40,000 km, Year of construction: 2018, FIAT TALENTO YEAR 2018 EURO 6 KM 140000 ISOTHERMAL WITH ROAD REFRIGERATOR UNIT NETWORK 220W ATP FNA 10/2027 RENEWABLE AIR CONDITIONING STANDARD STEREO STEERING WHEEL CONTROLS SINGLE OWNER SERVICED AND TYRED READY TO USE CAPACITY 900 KG Nwjdpfetv Ixvox Akfof FINANCING POSSIBILITY

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Nwjdpfxjfhb Tko Akfjf

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW Nsdpetqd Ndefx Akfswf ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK