High-speed radial drilling machine

Donau Donauflex 135

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Hfodpfx Aeurvzrjf Eeh Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. Hsdpoyaci Hefx Af Esfh max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t Hedpfx Aou Nc Rijf Ejfh compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: ready for operation (used), For sale is a CNC laser cutting system by Amada Co., Ltd., model PROMECAM / FO-3015 NT, equipped with the ASLUL 300 FO Tower automatic loading and unloading system. This is a highly productive industrial unit for automated sheet metal processing, including an integrated tower storage system with automatic material handling for efficient manufacturing processes with minimal manpower requirements. Technical Data – CNC Laser Cutting System AMADA PROMECAM 3015 NT with ASLUL 300 FO Tower Base Machine – Laser System 3015 NT Machine type: CNC laser cutting machine (CO₂ laser, flying optics) Manufacturer: Amada Co., Ltd. / AMADA PROMECAM Model: FO-3015 NT Control: AMNC-F CNC with touchscreen Laser technology: CO₂ laser, flying optics system Laser Power Laser output: 4,000 W Laser resonator: Fanuc AF 4000 Laser principle: CO₂ silent discharge Continuous power stability: ± 1% Working Area X-axis: approx. 3,070 mm Y-axis: approx. 1,550 mm Z-axis: approx. 100 – 200 mm Max. sheet size: approx. 3,000 × 1,500 mm Max. workpiece weight: up to approx. 920 kg Cutting capacity (typical): Mild steel: up to approx. 20 mm Stainless steel: up to approx. 15 mm Aluminum: up to approx. 10 mm Material thickness in general: 0.5 – 20 mm depending on material and laser power Axes and Dynamics 3 CNC axes: X, Y, Z Positioning accuracy: ± 0.01 mm Repeatability: ± 0.005 mm Positioning speed: up to 120 m/min per axis Simultaneous speed: up to 169 m/min Machine Design Flying optics system Heavy-duty cast frame for high stability Automatic pallet changer (2-table system) Automatic cutting head tracking Capacitive cutting head Connections Power supply: 400 V Total power consumption: approx. 70 kVA Compressed air requirement: approx. 6 bar Machine Dimensions and Weight Machine weight: approx. 11,000 kg Machine dimensions: approx. Length: 6,700 mm / Width: 4,400 mm / Height: approx. 2,100 mm ASLUL 300 FO Tower System – Automatic Sheet Storage System: automatic loading and unloading system with tower storage Max. sheet size: 3,050 × 1,525 mm Max. pallet weight: up to 3,000 kg Number of pallets: multi-level automatic storage system Pallet change time: approx. 55 seconds Features: automatic loading and unloading automatic material handling Hfsdpfx Afoyk S Rzj Eeh automatic pallet changing finished parts handling integration into automated production lines Equipment Flying optics laser system automatic shuttle pallet changer AMNC-F CNC controller ASLUL 300 FO Tower System automatic material handling suitable for industrial series production fully automatic operation possible extremely high productivity reduced setup times minimal personnel requirement Condition Used Technically inspected and fully functional The system can be demonstrated Immediately available Delivery time: upon agreement Freight terms: ex site, loaded free of charge Dismantling / transport / reassembly can be organized

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: electron. hand panel, chip conveyor,coolant Hodpfxjx Nqu Do Af Eefh

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device Hodpfou Et Nbox Af Eefh - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Year of construction: 2004, condition: excellent (used), 3D coordinate measuring machine in post and beam construction *On-floor installation on steel feet *Height floor to measuring plate: 600 mm Measuring range *X 3.200 , Y 1.600 , Z 1.800 [mm] Uncertainty of measurement *30 + L/40, max. 60 [µm] at L=3,000 mm Dynamics *3D-travel speed 220 mm/sec *3D acceleration 1000 mm/sec² Touch probe *Renishaw PHS / alternatively PH10M *Renishaw TP20+2 modules Control system *Pantec Eagle Pro Radio control unit *Hand control HT400 Software POLYWORKS Inspector Optional technologies MCR20 stylus changing bench Stylus changing bank ACR3 Optical scanner KREON or NIKON Hjdpfx Aohlqknof Esfh Services of the supplier transport, commissioning , calibration , final inspection Warranty 12 months from the date of acceptance

Condition: excellent (used), Year of construction: 2016, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type VS, lifting capacity 2500 kg -Accessories: A wireless remote control (transmitter/receiver) can be supplied for an additional charge. -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg Hfedpfx Ajy I Aknsf Eeh

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 11090, We are offering this used CemeCon CC 800/9 SINOX magnetron sputtering PVD coating system, year of manufacture 2001. Manufacturer: CemeCon Type: CC 800/9 SINOX Serial number: 11090 Year of manufacture: 2001, last upgrade in 2023 Power requirement: 140 kW Evaporators: 4 Voltage: 3×400V/N/PE Frequency: 50/60 Hz Hjdpsx Tup Hofx Af Esfh CemeCon CC800/9 SINOX features: - 4 cathodes - All cathodes DC or MF-pulsed - Anodes - 5 gas lines, 1 flammable gas - BIAS: DC or MF-pulsed - Heating system - 2 turbopumps - 6-position substrate carrier - Multiple targets - Extensive accessories including loading hardware, spare parts, and consumables - In 07/2023, the system controls were upgraded to the latest standard and the unit underwent manufacturer service. A bundle deal including a chiller, precision substrate cleaning unit, and lapping/polishing machine can also be offered. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg Hfedpfx Afsw I Scfj Eoh