Circular Saw - Automatic - Mitre

EISELE VMS 120

Condition: used, Year of construction: 1991, saw blade diameter 275 mm Isdpfxovg R Rno Adwstb cutting diameter 90 mm stroke 250 mm turning speeds 40 / 80 U/min capacity 90 degrees: square 75 mm total power requirement 1,0 / 1,4 kW weight of the machine ca. 250 kg dimensions of the machine ca. 600 x 700 x 1600 mm Features: - Coolant system - One-sided miter adjustment - Saw blade 275 x 2.5 x 40 mm - Machine base

Condition: new, "Shaft diameter: 50 mm Piston force: 10 tons Hydraulic motor: 1,5 KW Itodpfxouudgbs Adwsb Machine operating position: Horizontal/vertical Control: Programmable digital display Dimensions (w x h x l): 650 x 1270 x 1100 mm Weight: 430 kg Capacity: Steel pipe : 80 x 2 mm Square tube : 60 x 60 x 3 mm Round bar : 40 mm Flat bar : 60 x 60 x 6 mm Angle iron : 80 x 80 x 12 mm Scope of delivery: CE60H3 Standard roll set Equipment (Control panel, service manual, etc.)"

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm Iodpfxom Twgwe Adwotb engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: Itjdpefgyh Refx Adwob - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder Itjdpjd R Sipofx Adwob - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame Itjdpfxsilk H Tj Adwjb - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Itjdpev Uab Eefx Adwob

Condition: used, Year of construction: 1996, cutting diameter 260 mm saw band length 2910 mm cutting width 0,9 mm capacity 45 degrees: round 200 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 300 x 260 mm Ijdpfx Adjtqql Tewstb capacity 60 degrees: round 165 mm capacity 60 degrees: square 150 x 150 mm capacity 60 degrees: flat 160 x 120 mm cutting speed 35 / 70 m/min dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 950 mm total power requirement 2,0 kW weight of the machine ca. 400 kg dimensions of machine L x W x H 1,70 x 0,90 x 1,67 Accessories: coolant

Condition: excellent (used), Year of construction: 2005, Copy milling machine URBAN MLA A23 with centering device, year 2005 Itedpewhumhjfx Adwob Condition: very good

Condition: new, Motor power 1,2 kW 50Hz/400V Itjdpfxjgrlapo Adwjb belt opening belt dimensions 2450 x 27 x 0,9 mm weight 240 Kg Speed 35 + 70 m/min. cutting surface 0° 220 / 210 x 150 / 230 x 185 mm Cutting surface 45° right Cutting area 45° left 150 / 150 x 150 / 150 x 210 mm Cutting area 60° right Cutting area 60° left 90 / 90 x 90 / 90 x 100 mm Description The Zimmer Z241/R is a self-lowering saw for mitre cuts from 0° - 60° left. After the cut the machine stops by a safety limit switch. The lowering is infinitely variable via a hydraulic system. The saw arm can be raised to any position after the cut. The saw arm remains in the desired position. The Z241/R has the following equipment: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug -16A-. The machine is delivered completely assembled and ready for immediate use. Footprint: 870 x 1550 x 1740 mm Working height: 915 mm please ask for further versions