CNC lathe

EMCO MAXXTURN 95-MY

Condition: used, Year of construction: 2017, Technical details: turning diameter: 500 mm turning length: 1.300 mm centre distance: 1.430 mm greates pass round over bed: 700 mm spindle bore: 106 / 95 mm tool taper: VDI 40 spindle turning speed - stepless: 2.500 1/min max. torque on the spindle: 690 / 1040 Nm rapid traverse in x-y-z axis: 24 / 12 / 30 m/min drive capacity - spindle motor: 28/42 kW Tools speed: max. 4.000 1/min Torque: 45 Nm work piece power: 8 kW total power requirement: 46 kVA weight of the machine ca.: 11 t dimensions of the machine ca.: 6,6 x 2,25 x 2,15 m CNC Lathe with live tooling, Y-axis (-60/+80 mm), 12 pos. turret with 12 stations of live tools, c-Axis, Hedpfx Aeyi Ercjalsfc Tailstock, MT 4, quill dia. 100mm, chip conveyer (right side), 3-jaw chuck, hydr. steady, lot of accessories, *

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Hfedpfx Aasw T Sd Tolsc Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Hfjdpfx Aaew Tg Adslec Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec Hfsdpfx Aaefg Eu Ueljc • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Hedpfsw Rrvwox Aalefc Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Hjdpfx Asxt Ilfsalofc Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: used, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 6 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:6 mm Centre height:200 mm Grinding wheel dimensions:400x60 mm + 0x60 mm Workpiece headstock: Speed:1 rpm Hedpfov Armcox Aalsfc Workpiece weight max.:25 kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:2 m/s Grinding disc dimensions right:0 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:1,1 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter: mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: refurbished (used), Kellenberger internal & external universal cylindrical grinding machine Kellenberger 1500 U - 175 (internal grinding attachment included) Hodpfx Aajwqlykolefc Centre distance: 1500 mm - Centre height: 175 mm Siemens servomotor. Frequency converter internal & external, WSS Available with various accessories. Availability: immediately! Option 1000U: in overhaul process

Condition: excellent (used), Year of construction: 2000, Siemens control unit Bar passage 32 mm 2 x 12-position turrets with driven tools Main / counter spindle Y-axis turret top Parts lifting device Chip conveyor IRCO bar loading magazine Hjdpfswh U Edsx Aalefc

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 12 tool shaft (cylinder shaft DIN 69880) VDI 25 Hodpowx R Rkofx Aaljfc speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant