Quadra L3

Emmegi Quadra L3

Condition: ready for operation (used), Technical characteristics fully automatic center type QUADRA ES205 V04 Bar loading magazine o Max bar length 7500 mm o Minimum bar length 3000 or 1550 mm o Load capacity with axis 100 mm : 20 bars o Load capacity with axis 200 mm: 10 bars o Maximum loadable weight: 500 kg Bar positioning unit o Max bar length : 7500 mm o Minimum length of manually loaded bar: 500 mm o Carriage translation speed: 0.60 m/min Milling section 4 machining units o Drilling o Milling o Tapping up to M8 on thicknesses up to 4 mm (aluminium) o Sawing (aluminium) cut 0/90° and +/- 45 Sawing machine Evacuation section Blsdpfoundhfsx Agked Finished parts magazine Power and Motors Power: 35 Kw Overall dimensions Weight: 8420 Kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, Cutting and machining center for PVC frame profiles and mullion profiles. The machine consists of a loading magazine, saw module, G-module for PVC processing, cross table for manual insertion of steel reinforcements, screwing module with an automatic underscrewdriver, drilling module for dowel holes, longitudinal saw for mullion profiles, and outfeed table with hand screwdriver for the strike plates. Bodpexbdnrefx Agkold Available end of September 2025.

Condition: excellent (used), The LiSEC TAL-60 is a hydraulic manual sealing system specifically designed for the production of insulating glass (I.G.) units. It is primarily used to apply two-component sealants (such as polysulphide, silicone, or polyurethane) to the edges of glass panes. IndustrialMachines.net IndustrialMachines.net +3 Key Specifications & Technical Data Material Compatibility: Designed for two-component materials with an adjustable mixing ratio. Profile Width: Suitable for spacer profile widths ranging from 6 to 24 mm. Pumping System: Typically includes a 200L barrel pump for the A-component and a 20L pump for the B-component (catalyst). Reach & Movement: Features a flexible long arm with a radius of approximately 4 to 5 meters and swivel joints on the hand gun for maximum mobility. IndustrialMachines.net IndustrialMachines.net +3 Main Features Hydraulic Operation: Uses hydraulic pressure to ensure a consistent and controlled flow of sealant material. Operator Comfort: Includes weight relief for the sealant head to reduce operator fatigue during manual application. Control System: Equipped with a metal control cabinet featuring push buttons, indicator lights, and pressure gauges for direct monitoring of material flow. Remote Support: Newer generations of this series may include PLC-based remote support capabilities. Variants & Models Commonly listed versions include: TAL-60 PU/N: Specifically configured for polyurethane sealants. TAL-60 SI: Configured for silicone-based materials. TAL-60 TH: Often associated with Thiokol (polysulphide) sealing. Bsdjv Epfzjpfx Agkold IndustrialMachines.net IndustrialMachines.net +5 Would you like more information on current pricing or availability for a specific TAL-60 variant?

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 27,300 mm, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, CNC Vertical Edge Processing Center with Integrated Single-Sided Drilling and Milling Function LiSEC, KBF-60/33 Right – Left, Year: 2016 Automatic washing and drying machine for flat glass included Bjdpsv Hprqsfx Agkeld 400 V, 50 Hz In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Blodpowgm Ibjfx Agkjd Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. Bljdpfx Aeu Dl R Usgked The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication

Condition: like new (used), Year of construction: 2023, operating hours: 2,878 h, functionality: fully functional, We are offering this MECAL MC 304 Ariel – 5 MDT in almost new condition, year of construction 2023. Manufacturer: MECAL Model: MC 304 Ariel – 5 MDT Year of manufacture: 2023 The Mecal MC 304 Ariel-5 is a state-of-the-art 5-axis CNC machining center, perfectly suited for companies in the metalworking and construction industries. It is designed for high-speed machining of various materials such as brass, steel, aluminum, and PVC. Bsdpfeyft Iqsx Agkjld Technical specifications Weight (kg): 6500 RPM: 20000 Width (mm): 2500 Height (mm): 2650 Length (mm): 11800 X-axis travel (mm): 9500 Y-axis travel (mm): 1400 Z-axis travel (mm): 700 C-axis travel (mm): 22 A-axis rotation (deg): 120 Tool magazine: 12 Motor power (kW): 11 Max. blade diameter: 400 Cooling type: Coolant fluid Spindle interface type: HSK-F63 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, load capacity: 5,000 kg, rotary table diameter: 1,500 mm, pivoting range: 120 °, Capacity: 5,000 kg Max. height center of gravity: 300 mm Bsdpfx Aeuf Nu Regkold Max. center of gravity eccentricity: 200 mm Table diameter: 1.500 mm Motor power: 2,2 + 3kw Table tilt (Motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 - 0.5 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,440 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 274 mm, travel distance Z-axis: 390 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 3,000 mm, feed length Y-axis: 274 mm, feed length Z-axis: 390 mm, rotational speed (max.): 20,000 rpm, overall weight: 1,700 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 1,621 h, spindle motor power: 4,000 W, number of slots in tool magazine: 9, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, We offer this ready for use Emmegi PHANTOMATIC M3 vertical machining center, year of construction 2020. Manufacturer: Emmegi Model: PHANTOMATIC M3 Serial number: C124963 Year of manufacture: 2020 Weight: 1700 kg Pneumatic operating pressure: 6-8 bar Motor power: 6.5 kW Current: 9.4 A Voltage: 400/3 V Frequency: 50 Hz Machining center with less than 1700 spindle hours! TECHNICAL DETAILS Travel distances X-axis (longitudinal): 3,000 mm Y-axis (transverse): 274 mm Z-axis (vertical): 390 mm Automatic positioning: -90° | 0 | +90° Positioning speed X-axis: 56 m/min Y-axis: 22 m/min Z-axis: 22 m/min Spindle Maximum power in S1: 4 kW Maximum speed: 20,000 rpm Tool holder: HSK-50F Tool stations: 9 MACHINE DETAILS Weight: 1,700 kg Bjdpfx Aeygtckogkold Operating hours Spindle hours: 1,621 h Operating hours: 3,440 h EQUIPMENT - Cutter head, 80mm -Collets 5mm: 1 pc 9mm: 1 pc 2.5mm: 1 pc 8mm: 3 pcs 16mm: 1 pc 10mm: 3 pcs 7mm: 1 pc 12mm: 1 pc 6-5mm: 2 pcs 4mm: 1 pc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Wood-aluminum window outer frame processing center. The outer frame with an aluminum profile is cut and processed such as hinge insertions and milling. Macine is fully automatic. Profiles are placed on the roller track of the device, which are caught by the clamping pawl and directed to the processing center of the machine. After processing, the finished parts are automatically placed on the carts Blodpfx Asu Hgqhegked