Angel

ENGEL

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm Kedjx Nr Ryspfx Akljna • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: good (used), screw diameter: 70 mm, displacement volume: 1,500 cm³, 30476 - Ø 70 mm – ENGEL complete plasticizing unit D Knjdpfx Akezvx Snolsa Complete plasticizing unit for the injection molding side "3550", screw diameter = 70 mm, displacement volume = 1500 ccm, injection pressure = 2250 bar.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g Knjdjzvu U Sspfx Aklsa • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: good (used), Year of construction: 2000, clamping force: 4,000 kN, _TECHNICAL DATA – ENGEL ES 1800H/500W/400 HL-2F_ _INJECTION UNIT_ | AG1800H | AG500W Screw diameter: 70 mm | 40 mm Screw length: L/D 20 | 20 Metering stroke: 270 mm | 200 mm Screw speed: 226 rpm | 400 rpm Shot rate: 81 g/s | 32 g/s Injection rate: 386 cm³/s | 198 cm³/s Max. shot volume: 1039 cm³ | 251 cm³ Spec. injection pressure: 1441 bar | 1300 bar Spec. inj. pressure (increased): 1735 bar | 2020 bar Nozzle stroke: 750 mm | +5/-100 mm Nozzle contact force: 144 kN | 63 kN Heating capacity: 30.2 kW | 11.4 kW Heating zones (incl. nozzle): 5 | 7 _CLAMPING UNIT_ Clamping force: 4000 kN Opening stroke: 950 mm Ejector force: 82 kN Ejector stroke: 250 mm Max. platen distance: 1550 mm Kodozvf H Espfx Akljna Min. mold height: 600 mm Platen BAP: 1400×1080 mm Platen FAP: 1400×1200 mm _DRIVE_ Pump power: 55 kW Oil (main tank): 540 l Oil (suction tank): 400 l _WEIGHT (without oil)_ Clamping unit: 27 850 kg Inj. unit AG1800H: 5 600 kg Inj. unit AG500W: 1 000 kg

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Knsdpfszvc N Rex Aklsa Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, _ENGEL DUO 1800H/1800M/900 WP 2FCLS – Full Technical Parameters_ Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Ksdpfx Akozu Snaslona Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Hot runner zones: 16 Sequential control zones: 48

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, Controll : CC200 Kedpfx Aezu Smieklona Clamping force: 260 t Screw dia: 40 mm Type: Multicomponent Drive: Hydraulic Rotary table Machine is including robot and conveyor belt Robot: ERC 23/1-F

Condition: good (used), Year of construction: 2003, Engel VCe 740/150 HL (2003) Knjdpfx Akezu R Nijlja

Condition: excellent (used), Year of construction: 2006, _M 46_ _Engel VC 1050/220 HL_ Clamping force: 220 t Ksdezu R H Uspfx Akljna Year of manufacture: 2006 Control system: CC 200 Screw diameter: 55 mm Screw type: POM Min. mold height: 300 mm Max. opening stroke: 750 mm Max. platen distance: 1,050 mm Ejector stroke: 180 mm Tie-bar spacing (H × V): 860 × 830 mm Platen size: 560 × 600 mm Quick clamp: Yes Core pull: 2× Needle shut-off: 2×

Condition: used, Year of construction: 1993, Engel ES 80/50 HL (1993) Knsdezu R Hzspfx Aklja