Victory 330/90 Tech

ENGEL

Condition: excellent (used), Year of construction: 2013, clamping force: 4,000 kN, Equipment: documentation/manual, Clamping force: 400 t Lsdpsyctyzsfx Adwjhb Screw diameter: 70 mm Shot volume: 1501 cm3 Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 Ljdpfx Adeuxa Abowehb With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Condition: ready for operation (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 135 mm, This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Clamping Unit • Clamping force: 11,000 kN • Opening force (with pressure pads): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Mold installation height, min.: 700 mm • Mold installation height, max.: 1,280 mm • Maximum platen distance: 3,050 mm • Mounting platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie-bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie-bar diameter: 230 mm • Maximum mold weight: 30,000 kg • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) – time: 5.2 s • Dry cycle (Euromap 6) – stroke: 1,100 mmInjection Unit 1 • Screw diameter: 135 mm • Metering stroke: 570 mm • Maximum shot volume: 8,159 cm³ • Maximum screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 • Plasticizing rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticizing rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased injection pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW • Number of heating zones incl. nozzle: 6 Lsdex D Hd Ispfx Adwshb • Pump drive power: 130 kW • Oil filling volume: 1,600 lWeight • Net weight (clamping unit / injection unit): 62 t / 18 t

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable Air valve x 6 Lhjdpfx Adoyctm Uowsb Hydraulic core puller x 2 Control unit with hot runners x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized Engel service in Germany Dimensions Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request

Condition: excellent (used), Angel Victory 1350/220 Tech Closing 220 tons year 2004 Clamping plan WxH 860x830 Scrow 55mm 618 cm3 Lhedpspdrpzofx Adweb Cc 200 Minimum mold height 250mm Maximum 730mm

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Lhjdpfx Adeyctmzswsb Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 40 mm Shot weight: approx. 225 g Injection pressure: 2029 bar Metering volume: 251 cm³ Clamping unit: Clamping force: 110 t Tie bar distance: 0x0 mm Size of the platen: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - Energy saving Robot Sepro S5.15 Year of manufacture: 2016 5-axis robot: 3 axes driven by servo motors (electric); Axes A and C - pneumatic Touch control panel Lsdpfx Asyctmuedwshb Robot with adapter and protective housing Purchase of the robot at extra cost Dimensions: Weight: 6800 kg Length/Width/Height: 4.90x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Ljdpsgpxc Sjfx Adwjhb Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Lodpfx Adeyctmbowohb Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Ledpoyctlqsfx Adwehb Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t Lhsdpfx Aewtpfpedweb ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m Lhjdpfoyctk Hsx Adweb All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Ledpfx Asyctktodwshb Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge Lhedpfx Asi Igi Sedwsb • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: excellent (used), Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Lhjdpfoyctkgox Adweb Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request