Victory 330/125 Tech

ENGEL

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm Psdpfx Aaoyfrb Ne Dogg • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: excellent (used), Year of construction: 2004, Angel Pedpfx Ajh Rawboa Dogg Victory 80/45 Tech Closing 45 TOnnen, tie-bar-less Scrow 22 mm YEAR 2004 CC 200

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Pedpfxoyfh I Eo Aa Dsgg Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Psdpfx Aasxvings Djgg Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 191523, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3086- Offered here is a used injection molding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Pjdpfx Ajv Tb U Dea Dsgg Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine number: 191523 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent Psdpfxex Nr Huo Aa Dsgg • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours • Core pull Pgodpfx Aaex D I Egs Dog • Ejector plate safety device • Air valve 1/2" Additional equipment • 10-way water distributor

Condition: excellent (used), Year of construction: 2003, Engel Victory 330/80 power Closing 80 tons Psdpoiubdqjfx Aa Dsgg Snow diameter 35 mm Spray weight 158 cm3 Year 2003 Enlarged clamping plate 660x600

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. • Units available: 2 • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h Pgsdpfx Aox D I Eaja Deg • Core pull • Ejector plate safety device • Air valve 1/2" • Water distributor: 6-way

Condition: ready for operation (used), Year of construction: 2013, clamping force: 800 kN, screw diameter: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Pgjdpfxox D H Awe Aa Dsg Screw diameter 25 mm.1.) Clamping forceClamping force: 600 kNOpening stroke: 338 mmEjector stroke: 105 mmEjector force: 20.1 kN2.) DrivePump drive power: 15 kW3.) Injection unit 1Screw diameter22 mm25 mm30 mm35 mmMax. swept volume53 cm³69 cm³99 cm³135 cm³Max. screw speed480 rpm (for all diameters)Current screw speed480 rpm (for all diameters)Injection rate80 cm³/s (22 mm)104 cm³/s (25 mm)149 cm³/s (30 mm)203 cm³/s (35 mm)Injection rate increased53 cm³/s (22 mm)68 cm³/s (25 mm)98 cm³/s (30 mm)134 cm³/s (35 mm)Specific injection pressure2221 bar (22 mm)2090 bar (25 mm)1451 bar (30 mm)1066 bar (35 mm)Specific injection pressure increased2402 bar (22 mm)2404 bar (25 mm)2205 bar (30 mm)1620 bar (35 mm)Nozzle stroke530 mmNozzle contact pressure28.3 kN

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Pgsdpfx Aopdr Aioa Djg Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Injection unit Screw diameter: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Shot volume: 318 cm3 Type: Horizontal Drive: Hydraulic Clamping unit Min mould height: 300 mm max opening : 758 mm Pgsdpfox H Awljx Aa Djg Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve 4x hydraulic valves 4x Core pullers Hours: ca 37000 Wittmann W818-4597 available Complete machine data on request.

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Pgjdpfjvygh Njx Aa Dsg Weight: 3,200 kg Available immediately from stock

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Closing unit: Closing force [kN] - 400 Psdpfx Aowa S Uasa Dogg Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Psdpfxovxh Iue Aa Dsgg Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock