Used Rima for sale (134)

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Ibedsc Rntnjpfx Achea Speed max 18.000 c/h Pile height 235 mm Pile height pre-loading cage 124 mm

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Isdpodyky Tofx Achsba Table height 876 mm

Condition: used, Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment Iodsdrhpfepfx Achoba • - special: post code identification

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Isdpfx Asdykhmjchsba Speed max up to 15.000 Prod./h Table height 876 mm

Condition: good (used), Year of construction: 2016, Built in: 2016 Iedpfsu R Rynjx Achjba Length: 1,600 mm Width: 1,000mm Height: 2,200 mm

Condition: good (used), Year of construction: 2008, Log Stacker Year 2008 Description -straight infeed -infeed belt -reject unit -pressing station Ibsdezhnaxepfx Achja -turnoverbelt -delivery to right

Condition: ready for operation (used), Year of construction: 2011, Built in 2011 Iedpfxsd N D Npo Achsba

Condition: good (used), Year of construction: 2016, Year 2016 Description Product Length: Minimum: 180 mm (7.09") Maximum: 500 mm (19.70") Product Width: Minimum: 145 mm (5.71") Maximum: 320 mm (12.60") Compressed Log Length: Minimum: 700 mm (27.56") Maximum: 1,200 mm (47.24") Ibodpfxjzqrdto Achsa Maximum Log Weight: 170 kg (375 lbs) Cycle Time: 17 seconds (product dependent) Palletizing Height: Bottom edge of log: 100 mm (3.93") Top edge of log: 1,500 mm (59.06") Pick-Up Height: 900 mm (35.43") Electrical Supply: 400 V 3 Phase (3~) N + PE 50/60 Hz Installed Power: 1.6 kW Compressed Air Requirement: 65 l/min at 6 bar (87 psi) Maximum of 4 cycles per minute Hose connection: Ø 13 mm Machine Weight: 1,300 kg (2,870 lbs)

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Ibodpfx Acoh Ir E Ejhsa Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Year of construction: 2006, condition: good (used), Build in: 2002 Ibjdpfoh Itu Eox Achea - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Stack height pre-stack basket: 127 mm Ibsdpfx Asqpgmcschja Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment - Inlet with discharge - Double press - Infrared counter - Outfeed left - Outfeed conveyor

Condition: good (used), Year of construction: 2008, Log Stacker Year 2008 Description -straight infeed -infeed belt Ibsdszh Ev Rjpfx Achea -reject unit -pressing station -turnoverbelt -delivery to right

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Built in: 2007 Ibedpfx Asu R I Euschsa Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Pile height pre-loading cage: 127 mm Pile height total stack: 330 mm Infeed height: 660 - 1.016 mm Speed: 15.000 c/h

Condition: good (used), Year of construction: 2003, Year of construction 2003 Ibjdpfx Asu R Ulbechsa Size: max. 320 x 320 mm min. 133 x 152 mm Pile height: Max. 330 mm Speed: max: max. 100,000 ex./h

Condition: used, Year of construction: 2001, Built in 2001 Size max 320 x 250 mm Ibsdec Idi Repfx Achoa min 260 x 180 mm Pile height max 330 mm min 80 mm Infeed height max 890 mm min 860 mm Speed max 900 Pack./h

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA Iodjtmrkropfx Acheba - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, total height: 2,070 mm, total width: 2,160 mm, total length: 9,681 mm, overall weight: 3,500 kg, type of input current: three-phase, input voltage: 12 V, compressed air connection: 7 bar, pressure: 7 bar, operating pressure: 7 bar, input current: 25 A, About the Orimak BC410-PRO Ibjdpjzquvxjfx Achsa The machine is an Orimak BC410-PRO model. It was purchased for our production line but has not been used in active production due to changes in our installation plans. Therefore, its condition is like new. The machine: * Offers high precision and stable operating performance. * Is suitable for industrial use. * Has been regularly maintained and is in working order. * Can be inspected and tested on-site if desired. The machine will be delivered with all available accessories and technical documentation (if applicable). The reason for the sale is solely a project change; there are no technical malfunctions or performance issues with the machine.

Condition: excellent (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 230046, total height: 2,012 mm, total width: 2,160 mm, total length: 9,681 mm, overall weight: 3,500 kg, type of input current: DC, input voltage: 24 V, compressed air connection: 7 bar, operating pressure: 7 bar, input current: 25 A, Equipment: documentation/manual, With the ORITEQ BC410 pro Box Closing Machine, the side flaps of the boxes (FEFCO 410), which are filled with products, are glued together using HOT MELT TECHNOLOGY, ensuring high quality and cost-effectiveness. Ibjdpfjzqt Rhjx Achsa

Condition: new, functionality: fully functional, power: 315 kW (428.28 HP), fuel type: electric, color: other, overall weight: 25,300 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping • Hydraulic setting system TECHNICAL SPECIFICATIONS • Model: FABO PDK-150 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1500 mm • Max Feeding: 800 mm • Capacity: 300-600 TPH • Motor Power: Heavy duty GAMAK,315 kW Bearings: Heavy duty SKF-FAG Iedpfx Acozlta Ejhoba • Speed: 750 rpm • Weight: 25300 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Ibsdpfxszuyg Re Achea Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Iedpfot Nhm Isx Achsba

Condition: ready for operation (used), Year of construction: 2019, Capacity: 200-800kg/h. The machine is used for the production of stretched curd. Includes: Rising bowl: Prima, cutting device: Prima, lifting and tilting device: Frontmatec Hygiene - for holding 200 and 300 liter standard loading trolleys for efficient use in the food industry. Isdpfx Ajr Dcihechsba

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below. Iedpfxeq Nx E Se Achjba

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Ibedpozncm Hofx Achja Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Iedpfx Aozl D Exochjba Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack