Low loader semitrailer

ES-GE 3-Achs-Satteltieflader - Radmulden

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 1,10,000 mm, total height: 2,850 mm, rotational speed (max.): 2,100 rpm, overall weight: 20,000 kg, power: 209.62 kW (285.00 HP), transport length: 10,500 mm, transport width: 240 mm, transport height: 395 mm, Equipment: rotational speed infinitely variable, WERT PHANTOM mobile shredder on crawler chassis for various applications - wood - waste - tires - glass - paper - Building rubble - Light scrap Tooling according to customer requirements Equipment: Power: 205 KW - 285 HP Caterpillar C7.1. stage 5 Transmission: 2x 125,000 NM Optionally synchronous or asynchronous shaft rotation Hydraulics: Linde Belt width: 1000mm Discharge height: 3300 mm Magnet: Optional Spiral fan: standard Radio : standard Djdotty Hhopfx Addjcr Water spraying: standard Weight: 20 tons Dimensions L/W/H : 11x2,4x2,85m

Condition: good (used), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 390, total length: 11,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 35,000 kg, hopper volume: 5 l, rotor diameter: 860 mm, rotational speed (max.): 45 rpm, power: 404.52 kW (549.99 HP), Equipment: rotational speed infinitely variable, Arjes Titan 900 Demo machine Year of manufacture: 2025 Hours: 380 Equipped with paddle rotors and/or star rotors Also standard equipped with: Dcedpfexraigex Addsr - Magnet - Reversible fan - Remote control

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid Dcodpfxexc Axre Addsr * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED