Length sorting system

Esterer

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Djdpfowhv Rnjx Ad Ioup

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Semi-manual filling machine for vacuum bags The BIB'UP® semi-manual filling machine is perfect for the small and medium-sized production of BIB-type vacuum bags from 2 to 20 liters and Pouches from 1.5 to 3 liters. Specificities Operation in three steps : removal of tap, start of cycle (air removal from pouch, metering and filling, injection, sweeping, blowing of nitrogen at end of cycle), reinsertion of tap. High rates and efficiency Reliable filling machine, mobile and very easy to use BIB 3L Bags 280/290 filling rate /hour 5L Bags 250/260 filling rate /hour 10L Bags 200/210 filling rate /hour 15L Bags 160/175 filling rate /hour 20L Bags 140/150 filling rate /hour Pouch 1.5L 270/270 filling rate /hour 3L 245/250 filling rate /hour Specifications: Liquid output : 54 HL/h Air supply : 6 to 6.5 bars Air flow : 0.25 m³/h Nitrogen supply : 0.5 to 1 bars Nitrogen flow : depends on final installation Power supply : 230 V 50 Hz. Pulse counter (72 points per liter) Connection : liquid input through Æ Macon 40 male connector Noise level < 80 db Dujdpjiu Hxkjfx Ad Ijp Footprint : Depth : 720 mm Height : 1420 mm Width : 520 mm Weight : 55 kg (without option)

Condition: refurbished (used), 2 pieces 135 mm Ø x 180 mm Ø x 180/130 mm long suitable for Esterer S 71 and SS 56 gang saw Dusdpfou Rn Uisx Ad Isp

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. Dujdpfx Aoyl Afrsd Ijp HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures) Dujdpfx Aeihpn Njd Iep

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Dsdpfxjrmmqzs Ad Ieup

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Djdpfx Asyg Im Red Isup Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: used, Chipping roundwood: 100-150 m3/h Dedjhclffopfx Ad Ioup Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Dodpfxjw Eu Ake Ad Ioup 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 travelling with swords with control Dusdpfx Aeip T Dlsd Iop with length measuring with frame with hydraulics immediately available Location: Austria, near Vienna

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Duedov Hwk Uspfx Ad Iop Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Dodpfx Adjyhduye Ijup Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Djdst Hg Hujpfx Ad Ieup Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: used, 100 m³ buffer tank made of steel, horizontal, in a frame Volume: 100,000 ltr Dimensions (LxWxH): 15,400 mm x 3,500 mm x3,500 mm Dodjtv Rp Hepfx Ad Isup Insulation: 100 mm mineral wool, on all sides Wall construction: Insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: 1 x manhole for inspection work 1 x connection piece (supply and return (boiler)) 1 x connection piece (flow and return (consumer)) 2 x PT 100 temperature sensors

Condition: excellent (used), Spare parts for creel LSH 65, partly as good as new, new and used. Swing, stilts, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhang parts. Saw frame top and bottom, Saw hook with insert hinges. Pulleys. Dusdei T Egpjpfx Ad Iep Spare parts also available for Esterer sash gang SS 71.