High-performance sawmill (frame saw)

EWD HDN600 - LSH - GDZGE 600

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Dkjdpfjyr I Dmjx Aptet

Condition: new, empty load weight: 540 kg, maximum load weight: 2,460 kg, overall weight: 3,000 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from the manufacturer ANSSEMS model MSX3000 405x200 Go-Getter. Dedpfxsq Rfl To Aptekt As standard equipment, the Anssems car trailer has an aluminum floor, side edge profile in black, aluminum rims in black, LED lighting, storage box, lashing eyes on the outside of the frame, aluminum drive-on rails can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as high tarpaulin, side wall attachment, wheel stopper, rear support set, car lashing straps and anti-theft device.

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm Djdpfxsib H Dds Aptjkt - Ground clearance: approx. 550 mm

Condition: good (used), functionality: fully functional, Various Layher Base Jacks Used – Adjustable Base Supports for System Scaffolding Looking for used base jacks for system scaffolding? We offer a wide range of original Layher Allround base jacks, including both fixed and tiltable versions, with different lengths such as 0.48 m and 0.60 m. These steel screw jacks provide a stable and height-adjustable foundation for your scaffold structure, even on uneven surfaces. Suitable for professional use in construction, industrial, and renovation projects. Examples of available models: • Layher AR Base Jack 0.60 m – Fixed Model Dkodpsw Ddavjfx Aptjt For standard Allround scaffolding, coarse thread for quick adjustment • Layher Base Jack 0.60 m – Coarse Thread (Non-Branded) Compatible with various systems, extra robust • Layher AR Base Jack 0.48 m – Fixed Model Compact design, ideal for limited build heights • Tiltable Base Jacks – Used Flexible application on slopes or uneven terrain (available on request) Benefits of Used Base Jacks: • Fully functional, professionally inspected • Made of galvanized steel, suitable for heavy-duty use • Perfect for height correction and levelling • Coarse thread for fast, precise adjustment • Excellent price-to-quality ratio compared with new material _____ International Trade via BuildingEquipment.eu Our used base jacks are not only suitable for customers in the Netherlands, but are also delivered worldwide by us. Unique advantages: • Worldwide delivery: by pallet, container, or freight carrier • Complete export documentation & bulk quotations available • Can be combined with scaffold frames, brackets, ledgers, and more

Condition: new, Year of construction: 2026, Engine Dsdszqz T Repfx Aptskt Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dkjdpsv Sq S Njfx Aptet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise Dkjdporl Irvsfx Aptjt - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO Mobile jaw crusher on a tracked chassis The sheer power that the OLIMPO delivers thanks to its 1100x800 crusher is the ideal prerequisite for a specialized machine for professionals in quarries and recycling plants. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing maximum profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest level of robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. Dodpfx Apshd I U Eetekt The OLIMPO crusher certainly delivers convincing and unparalleled performance both in natural stone applications, in recycling, and in rental operations. Production capacity: approx. 360 tons/hour Patented HCS system Proportional valve with "Load Sensing" for optimizing the system and reducing fuel consumption by approx. 30%. Optional pre-screening Hydraulically adjustable crushing gap, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction system Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the system Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 hp/60 kW, emission stage V Control panel Tracked chassis 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Condition: used, Layher Allround Ledger 1.57 m Used – Strong Connection for Your Scaffold Structure This used Layher Allround ledger of 1.57 meters is an essential component within the modular Layher scaffold system. The ledger provides a robust horizontal connection between standards, ensuring the scaffold retains its stability and load-bearing capacity. Dksdpfx Ajw Db Nbjptet The used version is technically fully functional and offers an affordable alternative to new equipment without compromising on safety or quality. Key Features - Original Layher Allround system, proven quality - Length: 1.57 meters - Material: galvanized steel, strong and durable - Condition: technically inspected, ready for immediate use - Application: horizontal connection in Layher scaffolding Why choose this used ledger? - Reliable Layher quality at a competitive price - Robust steel for heavy-duty construction use - Quick assembly thanks to proven Layher couplings - Large quantities available from stock - Worldwide delivery possible, regardless of location

Condition: used, color: green, operation weight: 17,000 kg, Year of construction: 1987, Equipment: cabin, gripper hydraulics, Chassis: Wheel Driver's position: Cabin Design: Adjustable boom Equipment: StVZO lighting Attachments: Shovel Bucket: Excavating bucket, with teeth ID: 116943 11621 Std. Mobile excavator Fuchs 713 Adjustable boom All-wheel drive Ready for immediate use Fully functional We always have a large selection of used vehicles in stock. You can find more from our range under Non-binding offer, sale to businesses only, errors and prior sale excepted Advertisements and company logos on vehicles may have been digitally edited in photos Dksdpov S Nr Uefx Aptjt