Electronics / Drive technology

FANUC A06B-6124-H205

Condition: used, FANUC A06B-6124-H205 Servo Drive Amplifer Hodpfoyn Sbbox Akrol Condition: Used (functional) incl. 7-day functional warranty

Condition: excellent (used), Year of construction: 2011, operating hours: 5,040 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 420 mm, turning diameter: 420 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, MAZAK QUICK TURN 300 Smart Operating Hours: Automatic Operation: 5,040 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: Ø 720 mm Max. turning diameter: Ø 420 mm Max. bar stock diameter: Ø 80 mm Max. machining length: 1,200 mm Main Spindle Max. spindle speed: 4,000 rpm Spindle nose: JIS A2-8 Rated power (40% duty cycle): 26 kW Max. torque: 750 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Tailstock Taper: MK NC axis, pressure controlled via M-codes Max. axial pressure: 10,000 N Dimensions & Weight Machine dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flush General Specifications: SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard colour NC controlled tailstock Hodpfxjwzkvfs Akrjl Tailstock pressure adjustment Tailstock with fixed quill (650U/1250U) Operator door with safety interlock switch Double foot switch Fully enclosed work area Work area lighting Safety devices according to global standards Complete coolant system Chuck status notification Automatic tool setter (Tool Eye) 10.4" colour display EIA/ISO package LAN interface

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Hedjx D Epcopfx Akrjl • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: excellent (used), Year of construction: 2016, CMZ TA 20 TY-400 2016: YEAR: 2016 CNC: Fanuc 32i MAIN FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 473 mm Chuck: SMW Autoblok BHD 250 Bar capacity: 66 mm X axis travel: 310 mm Z axis travel: 400 mm Y axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Hedoyzduzspfx Akrsl Spindle bore: 73 mm Turret: 12 stations, all driven Max. speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Tailstock travel: 400 mm Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: Chuck SMW Autoblok BHD 250 Tool presetter Servo motor for tailstock Tool holder set including 2 driven holders Chip conveyor MACHINE CONDITION: Machine in very good condition. 100% operational. Can be inspected under power.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1540501589A, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table width: 540 mm, table length: 850 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 3, Equipment: documentation/manual, Tool Standard is CAT-40, Hsdpfx Aksyg Dt Tjrel Attached Accessories: 30 pieces of tool holders, Tool Presetter

Condition: used, Year of construction: 2000, tool clamping area VDI 50 mm Hjdpfxovn Urlj Akrol weight 0,5 t palett with 19 pcs. turning tool holder + 19 pcs. turning tools

Condition: excellent (used), functionality: fully functional, Good day, We are offering used clamping devices from Erowa and 3R, suitable for die-sinking EDM and milling operations. Below is a list of the available items (please refer to the attached images for details): - ER-034387 QuickChuck 50 mounted on a clamping block (Image 03/04) - ER-012299 Quick-Change Chuck NSF on a plate (Image 05/06) - ER-010562 Probe with 2 mm ball (Image 07/08) - ER-010723 ITS 50 Control Arbor (Image 09) - F-Tool Holder with 25 mm square (Image 10/11) - MTS Pallet (Image 12/13) - ER-008566 Collet Holder 50 (Image 14/15) - ER-010495 15 mm Square Alignment Gauge (Image 16/17) - Vice with Erowa platform (Image 18/19) Hjdpfoyl Nr Sex Akrjl - Erowa Holder with hexagonal slot, e.g. for dial gauge holders (Image 20/21) - Erowa Holder for flexible clamping applications (Image 22/23) - System 3R high-precision vise / can be converted to Erowa on request (Image 24/25) All parts have been thoroughly inspected and are fully functional. Please feel free to contact us if you have any questions or are interested.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Options: Chip conveyor Hodoy Ew Hlepfx Akrol High-pressure pump ISO programming Tooling

Condition: excellent (used), functionality: fully functional, Fixed tool holders Machine: MORI SEIKI SL2000 Turret manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request ----- 1x→ No. 444-201 Double Turning Tool Holder for main spindle and sub spindle with 1x clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request Hodpfxoynb E Nj Akrol ----- 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request ----- 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request

Condition: good (used), 35 pcs. VDI 20 holders as shown in the photos 6 of them driven Hsdpfx Akjykivusrol In good condition, immediately available from stock.