Feeler FTC 350 LMC

Feeler FTC 350 LMC

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 Podpjyalpcofx Alwjrb • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW Predpfxexx A Ewo Alwjb voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Immediately available. No waiting, start machining right away! Machine: MEXPOL TUB 660 x 3000 mm with stepless speed adjustment via frequency inverter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle nose: DIN 55027/11 Speed range: 9 – 1320 rpm Main drive: 15 kW Feed rate: longitudinal feed 0.039–18 mm/rev, cross feed 0.02–9 mm/rev Rapid traverse: longitudinal 3800 mm/min, cross 1900 mm/min Tailstock: Quill diameter 105 mm, Prsdsyr Dmkspfx Alwsb Stroke 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard equipment: frequency inverter, quick-change toolpost size C, coolant system, interlocked chuck guard, work light, change gear set, CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediate from stock (while stocks last)

Condition: new, Year of construction: 2023, 660 x 2300 mm, 104 mm passage EVS Variable spindle speed Cooling 2 pieces MT5 Center Standard machine tools Manual and spare parts list 3 claws 12" Sk type Predpfjptabaex Alwjb 2-axis digital display FAGOR Quick change chisel turret

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information. Additional equipment Pjdpfx Ajx D I Iuelworb • Console: Automatic cycle in the longitudinal direction with activation of console recess. Machine Benefits Technical Machine Benefits • Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces. • Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system. • Guide surfaces: hardened and plated counter surfaces. • Climbing milling: automatic device included. • Automatic tool clamping Extra Information Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.Maschinenbeschreibung:CNC-Horizontal-Drehmaschine - ROMI C 510 V5.0 – SIEMENSStandardausführung:. Siemens-Steuerung 828D sl, mit 10,4” LCD-Farbmonitor. ASA A2-6" Spindelkopf, Drehmoment: max. 303 Nm bzw. ASA A2-8", max. Drehmoment 408Nm, mit 520mm Schwingdurchmesserüber Bett, 450 mm Schwingdurchmesser über Schlittenführung und 255mm Schwingdurchmesser über Planschlitten. Reitstock mit manueller Positionierung des Grundkörpers, mit manueller Betätigung der Pinole (stehende Zentrierspitze) MK-4. Eilgang längs/quer mit 10.000mm/min. Herausziehbarer Spänewanne. Elektroanlage lieferbar für folgende Spannungen/Frequenzen: 400VCA / 50-60Hz. Abgedichtete Arbeitsraumleuchte. ROMI RMMP manuelles Maschinenpaket, bestehend aus CNC gesteuertem Hauptschlitten mit zwei  elektronischen Handrädern für X- und Z-Achse, Joystick-Schaltern und der  bedienerfreundlichen Siemens Software "Manual Machine Plus". Adapterplatte Multifix K22 Type B mit Multifix Stahlhalterkopf B K22. Schleppeinrichtung für Reitstock. Automatische Schmierung mit Inline-Filter und Füllstandsensor. Kühlsystem, komplett mit Kühlmittelbehälter und Kühlmittelpumpe (10l/min,@7bar, 1,5kw/ 2cv). Kühlwasser Spritzpistole mit zusätzlicher Pumpe. Elektrischer Schaltschrank mit Kühlung über Zentrifugalgebläse und Überdruck. Spritzschutz, komplett, Schutztüre mit Sicherheitsfenster und Verriegelung durch elektrische Sicherheitsschalter. Schrauben und Muttern für Nivellierung. Schraubwerkzeugsatz für den Betrieb der Anlage. Vollständige Dokumentation für das ROMI-Produkt auf CD. Standardlackierung: Epoxidlack strukturiert Munsell-Blau 10B-3/4 und Epoxidlack strukturiert grau RAL 7035.

Year of construction: 2023, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 640 mm MAX ROTATING DIAMETER: 600 mm MAX TURNING DIAMETER: 420 mm BAR CAPACITY: 75 mm SPINDLE: 3500 rpm; 15-18,5 kW; ASA A2-8 ; 254 mm X-AXIS TRAVEL: 210+30 mm Z-AXIS TRAVEL: 610 mm RAPID FEEDS X-Z: 18 - 24 m/min DRIVEN TURRET HEAD: BMT65 ; 12 POS; 4000 rpm; 4,5 kW CONTROL UNIT: FANUC 0i-TF WEIGHT: 6230 Kg Predpfx Alsyy D I Eewjb OVERALL DIMENSIONS: 4017 x 1848 x 1819 mm ACCESSORIES: SWARF CONVEYOR ; FANUC MANUAL GUIDE-I ; ETHERNET PORT ; USB PORT NOTE: WITH No 7 FIXED TOOL HOLDERS; RENISHAW MANUAL TOOL SETTER

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Additional equipment • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Psdszbilqjpfx Alwerb Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,700 rpm, travel distance X-axis: 194 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 640 mm, spindle motor power: 21,000 W, total height: 2,345 mm, overall weight: 7,900 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis MAS SP280 SY was manufactured in 2013. Ideal for precision horizontal turning, this machine maintains robust functionality despite its years. A solid choice for enhancing your machining operations. Contact us for more information. Additional equipment • Accessories: 2x 3 jaw chucks / Turning tool holder /Driven radial tool holder /Axial driven tool holders Extra Information • Spindle nose (din 55026): a6 • Max. Spindle torque mh s1/s6 - 40%: 200 / 257 nm • Max. Bar stock passage: 81 mm • X-axis: ball screw diameter/pitch: 32 / 12 mm • Z-axis: ball screw diameter/pitch: 40 / 15 mm • Y-axis: ball screw diameter/pitch: 32 / 12 mm Psdsx D Nt Espfx Alwerb • Max. Turning diameter: 280 mm • Max. Turning length between centers: 490 mm • Software version : version: v01. 04 +sp02/ no integrated safety option • Tools Tool Turret: Number of Positions: 12 • Diameter of the Clamping Bolt of the Tool Holder DIN 69880: 40 mm • Steel Size: 25x25 mm • Max. Tool Spindle Speed S3-40%: 4000 min-1 • Torque S1/S3 - 40%: 27 / 40 NmShell surface interpolation option: the control can process shell C and shell Y Dimensions Machine Depth 3875 mm

Condition: good (used), Year of construction: 2007, In good technical condition and fully operational. 4-axis machining center Year of manufacture: 2007 X-axis: 800 mm Y-axis: 520 mm Z-axis: 505 mm Spindle speed: 10,000 rpm Spindle taper: 7/24 taper No. 40 Spindle power: 15/18.5 kW (7.5/11) Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 48 m/min Rapid traverse Z-axis: 30 m/min Number of magazine stations: 24 Max. tool length: 300 mm Max. tool diameter: 80 mm Max. tool weight: 8 kg Machine footprint: 3,300 mm x 3,175 mm Machine weight: 7,500 kg Prsdpfx Asy R R N Rslwsb Max. machine height: 2,950 mm