Welding machine (window production)

Fendoors

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm Hodpfeu R Szasx Al Defk - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Current connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. ``` Includes: - Automatic head positioning - Pneumatic clamping system - Digital temperature control Hjdpfxeyyavrs Al Djfk - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° Hfodsym Sdyepfx Al Djk B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, FOREL Insulating Glass Line Hsdpoy If Aysfx Al Djfk - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Hsdperfbnmsfx Al Dsfk Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 11,700 h, power: 8.9 kW (12.10 HP), travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 27,000 rpm, The machine is used for fine machining of small pieces. (Al, steel) Hodpfx Aleq N Ayfe Defk

Year of construction: 1982, condition: used, In Good Condition Hfedpjdq Ug Isfx Al Djk

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Hfjdjwwlk Njpfx Al Djk

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Hfedpfx Alsy S E E No Dsk Line supervisor laptop Refilling unit Automatic frame unloading

Condition: excellent (used), Year of construction: 2013, Spinner TC600-65MC cnc lathe with C-axis and driven tools Year: 2013 Technical details: Control SIEMENS 840D-SolutionLine Spindle speed range: 4500 rpm Spindle motor power: 11 kW/ 16.5 kW Torque: main spindle (siemens, s6 40%) 301 Nm X-Axis Movement: 230 mm X-Axis Rapid Traverse: 15 m/min Z-Axis Movement: 740 mm Z-Axis Rapid Traverse: 24 m/min Center distance: approx. 600 mm Max turning diameter: 310 mm Workpiece diameter over bed: 425 mm Number of turrets: 1 Tool taper: DIN 69880/ VDI30 Number of turret stations: 16 Driven tool holder positions: 16 C-axis Speed of rotating tools: 6000 1/min Driven tool power: 6 kW Tailstock: Quill stroke: 120 mm Adjustment travel: 475 mm Machine dimensions: 2730x1500x1620mm Machine weight: 4500 kg Accessories/options: - hydraulic chuck with jaws - collet type chuck with collets - static tool holders - driven tool holders - Renishaw tool measuring arm - Swarf conveyor - High pressure coolant system - Bar feeder - Documentations Hfodpfoy Sv Egox Al Dok - Parts cather Under power in our warehouse!