Tractors (haulers)

Fendt 936 Vario

Condition: used, Year of construction: 2024, front tire size: 650/60R38, rear tire size: 750/70R44, Equipment: compressed air brake, Section Control Load weight rear wheels 2x 650kg Reversible fan Cool box / Infotainment package Contour Assistant Track guidance basic package RTK Novatel TI / HEadland Agronomy basic package Telemetry basic package / Rjdjtt I Nvopfx Adbobt

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned Rodovwlqqepfx Adbjbt All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2019, front tire size: 600/70R34, rear tire size: 710/70R42, Equipment: compressed air brake, Radar sensor Vario-Terminal 10.4 inch roof hatch / VarioGuide Variotronic VarioGuide device control / GSM Variodoc Pro Super Comfort seat controller / Hydr. pump 152 l/min / / Rbedpfx Ajr Ty N Nodbst

Condition: used, Year of construction: 2011, front tire size: 650/65R34, rear tire size: 710/75R42, Equipment: compressed air brake, Super comfort seat Evolution Load weight rear wheels Rear return / unpressurized / Rjdpfxotlr A Te Adbjbt

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Rbsdovv Dp Nopfx Adbot

Condition: used, Year of construction: 2024,

Condition: used, Year of construction: 2024, front tire size: 600/65 R34 151D MI -67 12 DW18, rear tire size: 710/70 R42 173D MI -55 10 DW23, Equipment: compressed air brake, Infotainment package 4x camera connections 4 USB connections Front weight 1,250 kg / rear wheel weights 2x 600 kg RTK NovAtel lane guidance Section Control / Rsdpfx Adsrxtcgjbebt

Condition: used, Year of construction: 2011, Cutterbar with rapeseed equipment Cutterbar is BJ 2022 Cutterbar Claas Vario / 930 / Rbodpfst Twuisx Adbet

Condition: used, Year of construction: 2019, Equipment: compressed air brake, Heatable front and rear windshield Additional device holder / Rbodpfx Adsr Ilxvjbst

Year of construction: 2019, condition: used, Year of manufacture: 2019 Redpov Harzefx Adbsbt New: No Empty weight: 900 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Moldboard 2700 mm, Plumbed for laser receivers