Bezel (5155)

feststehend SPH 370 mm

Condition: as good as new (ex-display), Year of construction: 1988, machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Kjdpjm E Tvhsfx Anienc Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm Knsdpfxjthuzpo Anijc dead weight 28 ton. good condition

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Kjdpfx Ajyaazmonionc Control: Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Kedoxw T Ugopfx Anijnc Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Knjdpfx Asu N D Rqsniec Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: excellent (used), Steel headstock Center height 650 mm Distance between centers 650 mm Height from base 1190 mm The total height can optionally be reduced by 100 mm, and the center height can also be reduced by 100 mm, by removing an intermediate plate. Further details, see image. Knedpfogzhbzsx Anisc

Condition: used, Year of construction: 1999, Technical details: working area: 10700 mm Tube length: 300-11000 mm min. workpiece diameter: 80 mm max. workpiece diameter: 260 mm Power: 120 KW dimensions: 21,5 x 5 x 3,8 m mm Kedpfovizuiex Anijnc weight: 90.000 kg pre-turn capacity: 200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1 *

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm control Sinumerik 840D spindle turning speed - stepless 20 - 18.000 U/min power capacity at 40 % load 28,00 kW power capacity at 100 % load 19,00 kW max. torque on the spindle 121 / 82 Nm spindle taper HSK-A63 B-axis -10 - +180 ° c-axis 360 x 0,001 ° feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed B-axis 1 - 10.800 °/min rapid traverse B-axis 30,00 U/min size of pallet 800 x 630 mm max. workpiece diameter 800 mm Knsdpjwiii Hofx Anisc workpiece height max. 1.330 mm table load 1,20 t toolpiece magazine: chain magazine 180 Stück tool diameter 80 mm tool diameter with 2 vacant positions 160 mm tool length - max. 450 mm weight of tools max. 15,00 kg total power requirement 57,00 kW weight of the machine ca. 22,00 t dimensions of the machine ca. 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik 840D powerline control, RS4 pallet-storage, chip conveyor, coolant system with temperature control, coolant through the spindle 40-80 bar infinitely variable via M function, air through the spindle, tool cone cleaning device, exhauster, mechanical tool breakage control, Renishaw workpiece measurement(without probe), electronic handwheel. Machine without pallets!!!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, drilling depth: 2,250 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 1,600 mm, table width: 1,300 mm, table load: 20,000 kg, Deep Hole Drilling, Milling and Tapping Machine 5 linear axes X, Y, Y1, Z, W Rotary table axis B Equipped with 3D CAD simulation, WISE PLUS system, electrical cabinet cooling, and fume extraction system. Capacity Gun drilling capacity: 40 mm Table X-axis stroke: 2000 mm Ram Y-axis stroke: 1500 mm Column Z-axis stroke: 700 mm Spindle taper: ISO 50 – DIN 69871 Motor power: 22 / 33 kW Table size: 1600 × 1300 mm Technical Specifications Drilling diameter range: Ø 5 – Ø 40 mm Maximum drilling depth: 2250 mm Milling capacity with cutting tools up to: Ø 60 mm Drilling axis inclination: W -15° / +25° Milling capacity: 400 cm³/min Filtration and cooling system tank capacity: 2000 L Maximum pressure: 80 bar Direct gun drilling with guide bushings: up to Ø 20 mm Rotary table load capacity: 20,000 kg Positioning: 360,000 positions 9 T-slots 18 H12 P=140 Positioning accuracy: ± 0.2 sec Ksdeyuc Rtspfx Anisnc Linear Axes X: 2000 mm Y: 1500 mm Z: 700 mm W: 1630 mm

Condition: excellent (used), Year of construction: 2001, drilling depth: 700 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 6,000 rpm, drill diameter: 40 mm, table length: 1,500 mm, table width: 1,250 mm, table load: 10,000 kg, Year of manufacture: 2001 Control: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Ksdpfx Aexu Dkgsnijnc Z: 1600 mm W: 500 mm Table: 1500*1250 mm, 10T B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor with coolant system Tool holder: SK50 Tool changer: 20 positions