Flame cutting machine

Ficep Kronos

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom Hfodpsu Idffefx Adwob *

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Hfedpfx Aelff H Ejdwob Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light Hjdpfx Aertd Uwedwjfb - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Year of construction: 2021, condition: used, KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20kg payload External axis module for coupled rotary axis, mathematically coupled Kuka ArcTech Basic Package + Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module Hfsdpfewgn Dwex Adwob During oscillation, the voltage is measured by the power source and thus, in the event of component distortion, the welding path is shifted. * Function only for fillet welds Includes Lorch S5 SpeedPulse XT welding machine Includes automatic torch cleaning station *Cutting device *Milling cutter *Welding separation spray

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the Hfodpfx Adoul Efmswob cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Workpiece height: 220mm Hjdpfxetqtk Aj Adwsfb Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. Hodpfx Adohzbipswofb - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Hfsdpow Eb Itefx Adwsb Travel paths: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm Hsdpsk Hdu Djfx Adwsfb total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 Hfjdpswlvlgofx Adwob MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010