Filter cloths for Chamber filter presses

Filtertücher für Filterpressen Kurzfristig verfügbar

Condition: used, System: Chamber filter press, used Type: REWA Application area: sludge dewatering Design: side rail Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Filter pressure: approx. 15 bar Gsdpjwqyfhofx Ag Sjuh Pump technology: optional Washing system: No Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg Gedpfxov Srguj Ag Souh

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Designed to accumulate mash before the packaging operation. The accumulation option allows the entire line to run continuously without stopping, independently of the packaging machine. Godpfsiu Hy Tjx Ag Sjuh - Capacity: 600 L - Material: Wnr. 1.4301, AISI 304 Stainless steel - Weight: 60 kg - With floating lid - With level indicator Dimensions: D - diameter: 565 mm H - total height: 1095 mm h1 - tank height without legs: 845 mm h2 - height of legs: 250 mm

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Figur-No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Guodpfx Agowqydwe Ssh Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Pump 3 SEEPEX Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: as good as new (ex-display), Year of construction: 1988, machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 Gusdpsm E Tvhefx Ag Seh STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gjdpfxox Ev Tks Ag Ssuh Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Gsdpokqlf Sjfx Ag Sjuh Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) Gujdpfx Aeykbimjg Ssh - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI Godpfsfbgz Iex Ag Seuh type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) Gedszbr U Uspfx Ag Souh -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace