Finscan Boardmaster

Finscan

Condition: excellent (used), For sale: 3 FINSCAN lines: 1x Finscan camera sorting line Boardmaster HD Year of manufacture: 2012 1x Finscan NOVA No need to turn the pieces and without infrared lights. Kjdpfx Asx Up Dbodwedg Speed: 200 pcs/min Year of manufacture: 2014 1x Finscan NOVA Camera sorting, speed 200–220 pcs/min. No need to turn the pieces and without infrared lights. Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Holtec package cross-cut saw Vario Cut with Holtec mechanization. Jörg Elektronik. Complete disposal/removal under the cross-cutting system. Kodpew Smz Defx Adwedg

Condition: excellent (used), Finscan Nova and a CGV full trimmer Kodpfx Adewq A Edewsdg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Kdodpfown D Izox Adwsg Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø Kdjdpjpfaxujfx Adwog

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,610 h, We offer a New Holland combine harvester – CR980 – grain combine – year of manufacture 2003. It worked until the end of the harvest, is in excellent condition, recently serviced, and we invite you to view it at our farm near Olsztyn. - Garaged during winter. - Thresher hours: 4147 - Engine hours: 5610 Ksdpexu E Erefx Adwodg Highly recommended!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, feed length Y-axis: 6,000 mm, Kippwanne für Baumstämme bis zu 6 m länge. Kjdjr Iig Djpfx Adwodg Tipping tray for logs up to a length of 6m Verfügbar ab September 2024 Available from September 2024

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) Kdsdpfx Aeikvlisdweg 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Kedshclffepfx Adwjdg Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: excellent (used), Year of construction: 2015, Stravis sawmill line with Jabłoński automatic edger after complete renovation. Condition like new. The line consists of: 1. Log conveyor for 5m logs with a cascade feeder 2. Caterpillar-chain saw 110 + 90 kW 3. Multi-blade saw (2 x 75 kW) spindle diameter 80mm 4. Roller conveyor l- 6m with a mechanism for stopping the movement of the left prism 5. Crosscut saw from 0.8 m to 5m 6. Base conveyor 7. Roller conveyor l=3.5m 8. Driven roller conveyor 4.5m 9. Driven roller conveyor l=4.0 m with a board dumping mechanism 10. Transverse belt conveyor b=3m, l=5m 11. Transverse belt conveyor with a pick-up b=2m, l=5m 12. Longitudinal belt conveyor b=0.4m, l=5m 13. Automatic edger Jabłoński 14. Gooseneck Jabłoński 15. Cross feeder with a scanner measuring the width of the board 16. Centering for the edger 17 17. Edge separator 18. Crosscutter from 0.8 m to 3.0 m 19. Gooseneck 20. Automatic stacker Jabłoński Kdsdpfx Aov Iyhfsdweg 21. Non-regenerated crosscutter Jabłoński 22. Bruks chipper with control (you need to make a belt or vibrating gutter) Assembly and start-up at the customer's premises is possible. Possibility of sending videos of the working machine before renovation. Possibility of setting the line in a turn or along the length. Optionally, construction of a base for the line. OPPORTUNITY